Skip to content

Baileigh CNC Water Jet Cutters

Water jet cutting removes metal, stone, and composites without heat distortion or blade wear. Pick the table size that fits your shop.

Choose your Baileigh CNC Water Jet Cutters

  • WJ-4X4CNC — Compact table for shops with tighter floor space.
  • WJ-85CNC — Mid-size table for steady production cutting runs.
  • WJ-512CNC — Largest table for oversized parts and sheet stock.
  • Save $ 41,989.53
    Baileigh Baileigh WJ-4X4CNC 47" × 47" CNC Water Jet Cutter
    $ 225,688.53
    $ 183,699.00

    Baileigh WJ-4X4CNC 47" × 47" CNC Water Jet Cutter Are you looking for a compact water jet cutter that handles precision work across metal, stone, ...

    View full details
  • Save $ 49,029.53
    Baileigh Baileigh WJ-85CNC 60" × 96" CNC Water Jet Cutter
    $ 263,528.53
    $ 214,499.00

    Baileigh WJ-85CNC 60" × 96" CNC Water Jet Cutter Are you cutting complex parts from metal, stone, or ceramic and losing precision to heat-affected...

    View full details
  • Save $ 59,086.72
    Baileigh Baileigh WJ-512CNC 60" × 144" CNC Water Jet Cutter
    $ 317,585.72
    $ 258,499.00

    Baileigh WJ-512CNC 60" × 144" CNC Water Jet Cutter Are you cutting thick metal, ceramic, or composite parts and losing edge quality to heat distor...

    View full details

Choosing a Baileigh Water Jet Cutter for Your Shop

Table size, cutting pressure, and pump type set these three models apart. Compare the specs below to find the right fit for your shop.

Baileigh WJ-4X4CNC 47" × 47" CNC Water Jet Cutter

  • Working Area: 48" × 48"
  • Motor: 42 HP
  • Cutting Pressure: 55,000 PSI
  • Cutting Accuracy: ±0.001"

Best for shops needing full water jet capability in a smaller footprint.

Baileigh WJ-85CNC 60" × 96" CNC Water Jet Cutter

  • Working Area: 60" × 96"
  • Motor: 42 HP
  • Cutting Pressure: 55,000 PSI
  • Cutting Accuracy: ±0.001"

A strong middle ground for production shops running steady work.

Baileigh WJ-512CNC 60" × 144" CNC Water Jet Cutter

  • Working Area: 60" × 144"
  • Motor: 42 HP
  • Cutting Pressure: 55,000 PSI
  • Cutting Accuracy: ±0.001"

Built for shops cutting the largest parts and sheet stock.


Baileigh CNC Water Jet Cutters FAQs

What materials can a Baileigh water jet cutter cut?

All three Baileigh water jet cutters handle metal, stone, glass, ceramics, plastics, and composites at 55,000 PSI. Since the stream carries no heat, edges stay clean without warping or hardening, so the same machine works across very different materials.

What's the difference between the three Baileigh water jet models?

The three models mainly differ in table size. The WJ-4X4CNC cuts on a 48 by 48 inch table, the WJ-85CNC steps up to 60 by 96 inches, and the WJ-512CNC offers the largest 60 by 144 inch table. All three run at 55,000 PSI.

How accurate is a Baileigh CNC water jet cutter?

All three models hold plus or minus 0.001 inch cutting accuracy, backed by a Windows-based CNC control that reads DXF files directly. BobCAD-CAM Express software comes included with each machine, so you can program parts without buying separate CAD software.

What maintenance does a water jet cutter need?

Each machine uses an abrasive auto-feed system to keep garnet flow steady during cuts, plus a two-stage water filter to protect the pump. Keeping the filters clean and the abrasive hopper stocked helps avoid unplanned downtime.