Celebrating 50+ Years In Craftsmanship | Est. 1975
Celebrating 50+ Years In Craftsmanship | Est. 1975
Skip to content

JET Air Filtration Systems

JET air filtration systems pull airborne dust, oil mist, and fine particles out of your shop while you work. Models range from compact woodworking units to industrial-grade ceiling-mount systems for closed metal shops.

Choose your JET Air Filtration System

We also carry JET Air Filtration Accessories to keep your system running with fresh replacement filters.

  • Save $ 150.81
    JET JET AFS-1000C 1000 CFM Air Filtration System
    $ 810.80
    $ 659.99

    JET AFS-1000C 1000 CFM Air Filtration System Are you breathing in fine dust during and after every session in your shop? What if your air filtrati...

    View full details
  • Save $ 188.54
    JET JET AFS-850 850 CFM Air Filtration System
    $ 1,013.53
    $ 824.99

    JET AFS-850 850 CFM Air Filtration System Are you breathing the same air your tools have been working in all day? What if your shop stayed c...

    View full details
  • Save $ 213.73
    JET JET AFS-2000 1700 CFM Air Filtration System
    $ 1,148.72
    $ 934.99

    JET AFS-2000 1700 CFM Air Filtration System Are you finishing a project only to find a fresh layer of fine dust settling on everything in your sho...

    View full details
  • Save $ 370.59
    JET JET IAFS-1700 Industrial Air Filtration Unit
    $ 1,986.59
    $ 1,616.00

    JET IAFS-1700 Industrial Air Filtration Unit Are you concerned about dust, smoke, and oil mist building up in your shop during a long day of wo...

    View full details
  • Save $ 486.20
    JET JET IAFS-2400 Industrial Air Filtration Unit
    $ 2,608.20
    $ 2,122.00

    JET IAFS-2400 Industrial Air Filtration Unit Are you breathing in oil mist, smoke, and fine dust every time you run your machines? What if your...

    View full details
  • Save $ 629.53
    JET JET IAFS-3000 Industrial Air Filtration Unit
    $ 3,378.53
    $ 2,749.00

    JT9-415150 JET IAFS-3000 Industrial Air Filtration Unit Are you concerned about the air quality in your shop during heavy metalworking or machini...

    View full details

Choosing a JET Air Filtration System for Your Shop

Finding the right JET air filtration system comes down to CFM capacity, filter rating, and whether your shop runs woodworking, metalworking, or both. Use the guide below to match each model to your work and space.

JET AFS Woodworking Air Filtration Systems

The AFS series is built for woodworking shops. These units handle fine dust and airborne particles with quiet motors, remote controls, and auto-sensing modes for hands-free operation.

JET AFS-1000C 1000 CFM Air Filtration System

  • CFM: 450–1000 (6 speeds)
  • Filter: 1 micron
  • Timer: 1–16 hours

Best for shops wanting a unit that monitors air quality automatically and adjusts fan speed on its own — no manual changes needed during work.

JET AFS-850 850 CFM Air Filtration System

  • CFM: 850
  • Filter: MERV 15
  • Timer: 1–16 hours

Best for small to mid-size shops wanting high-grade MERV 15 filtration with auto mode and a portable, lightweight build at 31.9 lbs.

JET AFS-2000 1700 CFM Air Filtration System

  • CFM: 800 / 1200 / 1700
  • Filter: 1 micron (3-stage)
  • Timer: 2 / 4 / 8 hours

Best for larger woodworking shops needing three-stage filtration, remote control, and up to 1700 CFM to cover more floor space per pass.


JET IAFS Industrial Air Filtration Units

The IAFS series is built for closed and conditioned metalworking shops where oil mist, smoke, and fine metal dust are a daily concern. These ceiling-mounted units run two-filter systems and handle higher CFM volumes than the AFS line.

JET IAFS-1700 Industrial Air Filtration Unit

  • CFM: 800 / 1200 / 1700
  • Filter: MERV 8 outer / MERV 12 inner
  • Timer: 1–9 hours

Best entry industrial unit for active metal and woodworking shops needing two-stage filtration and three-speed control in a proven ceiling-mount design.

JET IAFS-2400 Industrial Air Filtration Unit

  • CFM: 1,168 / 1,524 / 2,097
  • Filter: MERV 8 outer / MERV 12 inner
  • Timer: 1–9 hours

Best for closed metalworking shops needing more airflow capacity than the IAFS-1700, with the same two-stage filtration and a 3/4 HP motor.

JET IAFS-3000 Industrial Air Filtration Unit

  • CFM: 1,654 / 2,268 / 3,000
  • Filter: MERV 8 outer / MERV 12 inner
  • Timer: Up to 9 hours

Best for heavy metalworking shops needing maximum capacity — up to 3000 CFM and a 1HP enclosed motor built for demanding daily use.


JET Air Filtration Systems FAQs

What is the difference between the JET AFS and IAFS air filtration systems?

The AFS series is designed for woodworking shops and handles fine dust and airborne particles. The IAFS series is built for closed or conditioned metalworking shops where oil mist, smoke, and metal dust are ongoing concerns. IAFS units use metalworking-specific filter combinations and move higher CFM volumes.

Which JET air filtration system is best for a small woodworking shop?

The JET AFS-1000C is a strong choice for smaller woodworking shops — it senses air quality automatically, runs quietly, and filters down to 1 micron. The JET AFS-850 is a good lightweight option with MERV 15 filtration if portability matters.

Do JET air filtration systems come with replacement filters?

Replacement filters are sold separately. We carry JET Air Filtration Accessories including outer, inner, and charcoal filters for the AFS-1000C and AFS-2000 systems.

How many CFM do I need for my shop?

A common guideline is to cycle your shop air 6 to 10 times per hour. Multiply your shop's cubic footage by your target air changes, then divide by 60 to find the CFM you need. Larger or open shops, and those with heavy dust production, benefit from higher CFM models like the JET AFS-2000 or JET IAFS series.