JET AFS-1000C 1000 CFM Air Filtration System
Are you breathing in fine dust during and after every session in your shop?
What if your air filtration system could read the air and respond on its own, keeping conditions clean without you stopping your work?
Meet the JET AFS-1000C 1000 CFM Air Filtration System, a ceiling-mounted unit with an automatic air quality sensor that adjusts fan speed based on what it detects in the air around you.
With the AFS-1000C, you get a two-filter setup that captures particles down to 1 micron, a BLDC motor that runs quietly, and a radio frequency remote that lets you make changes from anywhere in the shop.
When your filtration system handles air quality on its own, you stay focused on the work in front of you.
JET AFS-1000C for Consistent Air Quality in Active Shops
Automatic Air Quality Sensor Adjusts Fan Speed Without Interrupting Work
The AFS-1000C includes a sensor that monitors dust levels in your shop and adjusts one of six fan speeds to match conditions. When dust rises during a cut, the unit responds on its own. You get cleaner air without stepping away from the machine to make adjustments manually.
Two-Filter System with Air Diffuser Captures Fine Particles Across a Wider Area
The two-filter setup captures airborne particles down to 1 micron. An air diffuser spreads the cleaned air in a broader pattern as it exits the unit. This gives the filtration better reach across your shop floor and reduces concentration of fine dust near your work area.
Radio Frequency Remote Controls Speed and Timer from Anywhere in the Shop
The RF remote lets you change fan speed or set the timer without walking to the unit. The timer can be programmed up to 16 hours, so the system continues running after you leave. Whether the unit is ceiling mounted across the shop or directly overhead, the remote keeps control within easy reach.
LED Display Panel Monitors Filter Life and Operating Status
The angled LED display shows fan speed, timer settings, and filter life in one place. The sensor updates filter life status as the filters are used, so you know when service is needed without guessing. The tilted panel angle makes the display readable when the unit is mounted to the ceiling.
What's Included
What's Included? JET AFS-1000C 1000 CFM Air Filtration System
-
JET AFS-1000C Air Filtration System — The main unit with automatic air quality sensor, two-filter system, BLDC motor, and angled LED display panel.
-
Radio Frequency Remote Control — Adjusts fan speed and sets the timer from any location in the shop.
Specs
JET AFS-1000C 1000 CFM Air Filtration System Specifications
- Stock Number: JT9-713000
- Model Number: AFS-1000C
- Motor Power: 1/3 HP
- Motor Phase: Single
- Motor Voltage: 120V
- Motor Amps: 3.8A
- Full Load Amps: 15A
- Recommended Circuit Size: 15A
- Prewired Voltage: 120V
- Speeds: 6
- Speed Range (CFM): 450–1000
- Timer Settings: 1–16 hours
- Sound Rating: 51–67 dB at 1 meter
- Overall Dimensions (L x W x H): 765 x 615 x 390 mm
- Net Weight: 33.0 lbs
- Gross Weight: 41.88 lbs
- Warranty: 5 Years
- Manual: Available from JET
Warning: Cancer and Reproductive Harm. For more information, go to www.P65Warnings.ca.gov/product
