Celebrating 50+ Years In Craftsmanship | Est. 1975
Celebrating 50+ Years In Craftsmanship | Est. 1975
Skip to content

JET Cold Saws

JET cold saws cut ferrous and non-ferrous stock cleanly and leave edges ready to use without secondary cleanup. Models range from 10" to 14" to fit production shops of different sizes.

Choose your JET Cold Saw

We also carry JET Cold Saw Blades to keep your cold saws cutting at full performance.

  • Sale
    JET JET CS-275 10" 275mm Ferrous Manual Cold Saw
    from $ 3,453.00

    JET CS-275 10" 275mm Ferrous Manual Cold Saw Are you tired of ragged cuts, burrs, and rework time on steel and structural stock? What if every cut...

    View full details
  • Sale
    JET JET CS-315 12" 315mm Ferrous Manual Cold Saw
    from $ 3,728.00

    JET CS-315 12" 315mm Ferrous Manual Cold Saw Are you tired of grinding away burrs and cleaning up rough cuts after every stroke through steel or s...

    View full details
  • Sale
    JET JET J-FK350 14" 350mm Ferrous Manual Cold Saw
    from $ 9,063.00

    JET J-FK350 14" 350mm Ferrous Manual Cold Saw Are you tired of dealing with rough cuts, heat distortion, and burrs that slow down your finishing w...

    View full details
  • Sale
    JET JET J-CK350 14" 350mm Non-Ferrous High-Speed Manual Cold Saw
    from $ 9,239.00

    JET J-CK350 14" 350mm Non-Ferrous High-Speed Manual Cold Saw Are you losing time cleaning up rough cuts and grinding down burrs after every sectio...

    View full details

Choosing a JET Cold Saw for Your Shop

The right JET cold saw comes down to blade size, material type, and how much capacity your shop needs. Use the guide below to match the right model to your work.

JET CS-275 10" 275mm Ferrous Manual Cold Saw

  • Blade: 275mm (10")
  • Motor: 1-1/2 HP
  • Round capacity at 90°: 3-19/64"

Best compact ferrous cold saw for shops that cut smaller steel and structural stock and need clean results without a large footprint.

JET CS-315 12" 315mm Ferrous Manual Cold Saw

  • Blade: 315mm (12")
  • Motor: 2 HP
  • Round capacity at 90°: 3-1/2"

Best mid-size ferrous saw for machine shops needing more vise capacity, a stronger motor, and clean cuts through steel and stainless.

JET J-FK350 14" 350mm Ferrous Manual Cold Saw

  • Blade: 350mm (14")
  • Motor: 2 HP
  • Round capacity at 90°: 3"

Best full-size ferrous cold saw for production shops that cut steel, stainless, and hard alloys and need a heavy, stable machine.

JET J-CK350 14" 350mm Non-Ferrous High-Speed Manual Cold Saw

  • Blade: 350mm (14")
  • Motor: 2 HP
  • Round capacity at 90°: 2"

Best 14" cold saw for shops cutting aluminum and non-ferrous stock who need high blade speed, mist coolant, and clean results on every pass.


JET Cold Saws FAQs

What is a cold saw and how is it different from an abrasive cut-off saw?

A cold saw uses a toothed circular blade spinning at low RPM to cut metal without generating significant heat. The blade and material stay cool, which leaves a clean, burr-free cut face that is often ready to use without grinding. An abrasive saw uses a grinding wheel at high speed and generates heat, sparks, and a rougher cut edge.

What is the difference between a ferrous and a non-ferrous cold saw?

Ferrous cold saws are designed for cutting steel, stainless steel, and hard alloys. They run at lower blade speeds suited to those materials. Non-ferrous cold saws run at higher blade speeds and are built for aluminum, brass, copper, and similar soft metals. Using the wrong saw for your material type shortens blade life and reduces cut quality.

Do JET cold saws come with blades?

Yes. Each JET cold saw ships with a blade matched to its material type. Replacement blades are available separately through our JET Cold Saw Blades collection when it is time to replace a worn blade.

What voltage options are available for JET cold saws?

It varies by model. The JET CS-275 and JET CS-315 are available in 1-phase and 3-phase. The JET J-FK350 and JET J-CK350 are 3-phase only, available in 230V or 460V.