JET J-FK350 14" 350mm Ferrous Manual Cold Saw
Are you tired of dealing with rough cuts, heat distortion, and burrs that slow down your finishing work on steel and stainless?
What if every cut came off the blade clean, square, and ready to use without a grinder in sight?
Meet the JET J-FK350 14" 350mm Ferrous Manual Cold Saw, built for machine shops and fabrication professionals who cut steel, stainless, and tough alloys day in and day out.
With the J-FK350, you get a heavy cast iron frame, a flood coolant system, and a self-centering vise that holds material firmly so the blade does its job without chatter or drift.
When your cold saw delivers clean, burr-free cuts on every pass, you spend less time cleaning up edges and more time moving your work forward.
JET J-FK350 for Clean, Burr-Free Cutting in Steel and Stainless
Double Self-Centering Vise Holds Material Without Drift
The double self-centering vise with adjustable gibs clamps stock firmly from both sides before the blade makes contact. This keeps the material from shifting during the cut and eliminates the chatter that leads to rough edges. The result is a cleaner cut face that requires little to no secondary finishing.
Flood Coolant System Protects the Blade and the Cut
The flood-style coolant with flow control delivers consistent lubrication directly to the cutting zone. This keeps blade temperature in check, extends blade life, and prevents heat buildup that can harden cut edges or distort thin-wall tubing. Controlling coolant flow lets you match delivery to the material and cut depth.
Cast Iron Frame Base Provides a Stable Cutting Platform
The heavy-duty cast iron frame base absorbs vibration and keeps the saw planted during cuts in dense material. A stable base means the blade tracks true from start to finish, which matters most when cutting solid round or solid square stock at capacity. Built-in storage keeps coolant supplies and accessories close at hand.
Quick-Tension Miter System Speeds Up Angle Cuts
The quick tension and release miter system locks the head at 45° right, 45° left, and 90° center with positive stops. Changing miter angle takes seconds, not minutes, which keeps production moving when you are cutting multiple angles in a single job. The head is also capable of slotting, adding flexibility for structural and profile work.
What's Included
What's Included? JET J-FK350 14" 350mm Ferrous Manual Cold Saw
-
350mm Cold Saw — the main cutting unit configured for ferrous material including steel, stainless, and hard alloys
-
Flood Coolant System with Flow Control — delivers lubrication to the cutting zone to protect the blade and extend service life
-
30" Adjustable Material Stop — sets repeatable cut lengths so you can run multiple identical pieces without measuring each time
-
Two-Piece Cast Iron Blade Guard — protects the operator and allows blade changes without full guard removal
Specs
JET J-FK350 14" 350mm Ferrous Manual Cold Saw Specifications
- Blade Diameter: 350mm (14")
- Style: Ferrous
- Maximum Vise Opening: 6"
- Solid Round at 90°: 3"
- Solid Round at 45°: 2-25/64"
- Solid Square at 90°: 3" x 3"
- Solid Square at 45°: 2-25/64" x 2-25/64"
- Tubing Round at 90°: 4-1/2"
- Tubing Round at 45°: 3-1/2"
- Tubing Rectangle at 45°: 3-19/64" x 3"
- Miter Stops: 45° Right, 45° Left, 90° Center
- Material Stop: 30" adjustable length
- Motor — 220V Model (J-FK350-2K): 2HP, 220V, 3-Phase, 2/4P, 7.22/4.92 Amps | Stock No. JT9-414214K
- Motor — 460V Model (J-FK350-4K): 2HP, 440V, 3-Phase, 4/6P, 3.61/2.4 Amps | Stock No. JT9-414217K
- Net Weight: 706 lbs
- Gross Weight: 760 lbs
- Warranty: 2 Years
- Manual available through JET
Warning: Cancer and Reproductive Harm. For more information, go to www.P65Warnings.ca.gov/product
