JET AFS-2000 1700 CFM Air Filtration System
Are you finishing a project only to find a fresh layer of fine dust settling on everything in your shop?
What if your air stayed clean enough that dust never had the chance to land in the first place?
Meet the JET AFS-2000 1700 CFM Air Filtration System, a ceiling-mounted unit built to pull fine particles out of your shop air continuously while you work.
With the AFS-2000, you get a three-filter system, three speed settings up to 1700 CFM, and a remote control with a built-in timer so the unit keeps running after you leave the shop.
When your air is clean, your finishes go on right, your lungs stay protected, and your shop stays ready for the next job.
JET AFS-2000 for Continuous Shop Air Filtration
Three-Filter System with Air Diffuser Clears Fine Particles Thoroughly
The AFS-2000 runs air through three stages of filtration before returning it to the shop. The electrostatic outer filter attracts fine dust particles that standard filters miss. The inner pocket filter captures what passes through, and it is removable for cleaning without replacing the whole assembly. An air diffuser spreads the returning airflow across a broader area so clean air reaches more of the shop with each pass.
Three-Speed Motor Matches Airflow to Shop Conditions
The 1/3 HP single-phase motor runs at three speeds: 800, 1200, or 1700 CFM. Lower speeds keep the shop quieter during light work or finishing. Higher speeds move more air during heavy cutting sessions when dust production is at its peak. The fully enclosed ball bearing motor includes overload protection for long service life.
Remote Control with Built-In Timer Runs the Unit on Your Schedule
The included remote lets you adjust speed and power from across the shop without walking back to the unit. The built-in timer offers 2, 4, and 8-hour settings so the AFS-2000 keeps filtering after you shut down for the day. Residual fine dust that stays suspended after work is done gets cleared before it settles on your bench or your project.
Adjustable Exhaust Directs Clean Air Where the Shop Needs It
The adjustable exhaust lets you aim returning airflow toward problem areas in your shop layout. Whether your finishing area needs cleaner air or your main workstation sees the most dust, you can direct circulation to match the way your shop is set up. Four eye bolts and all hanging hardware are included so installation is straightforward.
What's Included
What's Included? JET AFS-2000 1700 CFM Air Filtration System
-
AFS-2000 Air Filtration Unit — The main ceiling-mounted filtration unit with three-speed motor and three-filter system.
-
Electrostatic Outer Filter — Disposable filter that attracts fine dust particles, including those that standard filters allow to pass.
-
Inner Pocket Filter — Removable secondary filter that captures particles that pass through the outer filter; cleanable for extended use.
-
Air Diffuser — Disperses outgoing filtered air into a broader pattern for wider shop coverage.
-
Remote Control — Controls power and speed from a distance; includes a built-in timer with 2, 4, and 8-hour settings.
-
Hanging Hardware — Four eye bolts and all required hardware for ceiling mounting.
-
Rubber Feet — Allow the unit to rest on a workbench surface without marring when ceiling mounting is not practical.
Specs
JET AFS-2000 1700 CFM Air Filtration System Specifications
-
Stock Number: JT9-708615
-
Model Number: AFS-2000
-
Motor Power: 1/3 HP
-
Motor Phase: Single
-
Motor Voltage: 115V
-
Speeds (CFM): 800 / 1200 / 1700
-
Cycles Per Hour (20' x 20' x 8' room): 31.9
-
Timer Settings: 2 / 4 / 8 hours
-
Inner Filter Efficiency: 1 micron
-
Net Weight: 121 lbs
-
Warranty: 5 years
Warning: Cancer and Reproductive Harm. For more information, go to www.P65Warnings.ca.gov/product
