Skip to content

Baileigh Tube & Pipe Notchers

Baileigh tube and pipe notchers cut clean, repeatable notches for fabrication work in manual, hole saw, belt, and end mill styles.

We also carry Baileigh Metal Bandsaws and Baileigh Welding Tables to help you cut tube to length and finish the joint after notching.

  • Save $ 114.07
    Baileigh Baileigh TN-210H Drill Press & Vise Mount Hole Saw Tube Notcher — 3/4" to 2" OD
    $ 608.07
    $ 494.00

    Baileigh TN-210H Drill Press & Vise Mount Hole Saw Tube Notcher — 3/4" to 2" OD Cutting clean, angled notches in round tubing by hand is slow ...

    View full details
  • Save $ 143.33
    Baileigh Baileigh TN-50M Manual Pipe Notcher — 1/4" to 1/2" Pipe
    $ 770.32
    $ 626.99

    Baileigh TN-50M Manual Pipe Notcher — 1/4" to 1/2" Pipe Notching small pipe by hand can be slow and inconsistent without the right tool. The Baile...

    View full details
  • Save $ 181.06
    Baileigh Baileigh TN-125M Manual Pipe Notcher — 3/4" to 1-1/4" Pipe
    $ 973.05
    $ 791.99

    Baileigh TN-125M Manual Pipe Notcher — 3/4" to 1-1/4" Pipe Notching pipe by hand often means uneven cuts or extra setup time. The Baileigh TN-125M...

    View full details
  • Save $ 201.60
    Baileigh Baileigh TN-250 Vise Mount Hole Saw Tube Notcher — 2-1/2" OD Max
    $ 1,083.59
    $ 881.99

    Baileigh TN-250 Vise Mount Hole Saw Tube Notcher — 2-1/2" OD Max Notching tube by hand often leaves you re-centering the workpiece after every cut...

    View full details
  • Save $ 237.27
    Baileigh Baileigh TN-200M Manual Pipe Notcher — 1-1/2" to 2" Pipe
    $ 1,270.27
    $ 1,033.00

    Baileigh TN-200M Manual Pipe Notcher — 1-1/2" to 2" Pipe Notching large pipe by hand often leads to crushed edges and uneven fits. The Baileigh TN...

    View full details
  • Save $ 792.91
    Baileigh Baileigh TN-300 110V Benchtop Hole Saw Tube Notcher — 3/4" to 3" OD
    $ 4,261.91
    $ 3,469.00

    Baileigh TN-300 110V Benchtop Hole Saw Tube Notcher — 3/4" to 3" OD Notching tube and pipe by hand often leaves uneven ends and slow setup. The Ba...

    View full details
  • Save $ 1,285.79
    Baileigh Baileigh TN-400X3 220V 3-Station Abrasive Belt Tube Notcher — 4HP
    $ 6,905.79
    $ 5,620.00

    Baileigh TN-400X3 220V 3-Station Abrasive Belt Tube Notcher — 4HP Switching tooling setups between notching jobs slows down a busy fab shop. The B...

    View full details
  • Save $ 1,469.49
    Baileigh Baileigh TN-400 220V 3HP Abrasive Belt Tube Notcher — 4" Belt
    $ 7,898.49
    $ 6,429.00

    Baileigh TN-400 220V 3HP Abrasive Belt Tube Notcher — 4" Belt Notching tube and pipe by hand often leaves rough, uneven cuts that need extra clean...

    View full details
  • Save $ 1,479.39
    Baileigh Baileigh TN-200E 220V Electric Tube & Pipe Notcher — 3/4" to 2" Schedule 40
    $ 7,946.39
    $ 6,467.00

    Baileigh TN-200E 220V Electric Tube & Pipe Notcher — 3/4" to 2" Schedule 40 Notching pipe by hand slows down fabrication work and rarely gives...

    View full details
  • Save $ 1,645.49
    Baileigh Baileigh TN-700 110V End Mill Tube & Pipe Notcher
    $ 8,844.49
    $ 7,199.00

    Baileigh TN-700 110V End Mill Tube & Pipe Notcher Notching tube and pipe on a vertical mill ties up equipment you need for other jobs. The Bai...

    View full details
  • Save $ 1,727.77
    Baileigh Baileigh TN-600 220V 5HP Abrasive Belt Tube Notcher — 6" Belt
    $ 9,286.77
    $ 7,559.00

    Baileigh TN-600 220V 5HP Abrasive Belt Tube Notcher - 6" Belt Notching round tube and pipe by hand often leads to uneven joints and wasted materia...

    View full details
  • Save $ 2,354.06
    Baileigh Baileigh TN-800 110V Eccentric Cut End Mill Tube & Pipe Notcher
    $ 12,653.06
    $ 10,299.00

    Baileigh TN-800 110V Eccentric Cut End Mill Tube & Pipe Notcher Notching tube by hand takes time and rarely gives you the same cut twice. The ...

    View full details

Choosing the Right Baileigh Tube & Pipe Notcher

The right notcher for your shop depends on pipe size, power source, and how often you run the job. Use the guide below to match a model to your daily notching needs.

Baileigh Manual & Electric Pipe Notchers

These notchers cut a straight 90° notch in schedule 40 pipe for fixtures and frames. Choose manual for job site work or electric for steady daily use.

Baileigh TN-50M

  • Pipe Capacity: 1/4" to 1/2" Sch 40
  • Notch Angle: 90°
  • Power: Manual

A good fit for shops that need to notch small fixture tubing without running a power cord.

Baileigh TN-125M

  • Pipe Capacity: 3/4" to 1-1/4" Sch 40
  • Notch Angle: 90°
  • Power: Manual

A solid step up for shops notching mid-size pipe on fixtures and frames.

Baileigh TN-200M

  • Pipe Capacity: 2" Sch 40
  • Notch Angle: 90°
  • Power: Manual

Right for shops notching larger pipe by hand without added cost.

Baileigh TN-200E

  • Pipe Capacity: 1/4" to 2" OD Sch 40
  • Notch Angle: 90°
  • Power: 220V Electric

Suited for shops that want notching power behind the same straight 90° cut, without the manual effort.


Baileigh Hole Saw Tube Notchers

These notchers drive hole saw tooling to cut angled notches for round tube joints. They mount to a drill press, bench, or vise, or run as a standalone benchtop unit.

Baileigh TN-210H

  • Notch Capacity: 2" OD
  • Notch Angle: 0° to 60°
  • Power: Electric drill

A practical option for shops that already own a drill press or bench vise.

Baileigh TN-250

  • Notch Capacity: 2.5" OD
  • Notch Angle: 0° to 180°
  • Power: Electric drill

Works well for shops that need a wider angle range for bent or angled tubing.

Baileigh TN-300

  • Notch Capacity: 3" OD
  • Notch Angle: 0° to 90°
  • Power: 110V, 0.5 HP

A strong choice for shops running steady daily notching from a self-contained bench unit.


Baileigh Abrasive Belt Tube Notchers

These notchers grind an angled notch with an abrasive belt, built for shops that need to cut angled joints in tube and pipe every day. Motor size and station count scale with production volume.

Baileigh TN-400X3

  • Notch Capacity: 3" OD
  • Notch Angle: 0° to 60°
  • Power: 220V, 4 HP

Built for shops running three notching jobs at once without slowing production.

Baileigh TN-400

  • Notch Capacity: 2" OD
  • Notch Angle: 0° to 60°
  • Power: 220V, 3 HP

A solid single-station choice for shops doing frequent angled tube work.

Baileigh TN-600

  • Notch Capacity: 3" OD
  • Notch Angle: 0° to 60°
  • Power: 220V, 5 HP

Fits shops that need more belt speed and power for heavier daily use.


Baileigh End Mill Tube Notchers

These notchers use an end mill for tooling-free, motorized notching on fabrication joints. They deliver a finer finish for shops running precision tube work.

Baileigh TN-700

  • Notch Capacity: 3" OD
  • Notch Angle: 0° to 60°
  • Power: 110V, 2 HP

Suited for shops that want end mill precision on angled fabrication joints.

Baileigh TN-800

  • Notch Capacity: 2.5" OD
  • Notch Angle: 0° to 60°
  • Power: 110V, 1 HP

Made for shops doing eccentric cuts that standard notchers can't handle.


Baileigh Tube & Pipe Notchers FAQs

What is the difference between a manual and a powered pipe notcher?

Manual notchers, like the Baileigh TN-50M, need no power source and work well for occasional or job site use. Powered models cut faster and hold up better under daily production runs.

What angle range do I need for notching tube on a weld joint?

A straight 90° notch works for square joints, while a 0° to 60° range covers most angled fabrication joints. The Baileigh TN-250 offers the widest angle range in this lineup at up to 180°.

Do I need a drill press to use a hole saw tube notcher?

No. The Baileigh TN-210H and TN-250 mount to a drill press, bench, or vise and run off a standard electric drill. The TN-300 is a self-contained 110V benchtop unit that needs no drill at all.

What size tube and pipe can these notchers handle?

Capacity ranges from 1/4" pipe on the small manual models up to 3" OD tube on the larger belt and end mill models. Check each product page for exact capacity before ordering.