Dake M-30 30-Ton Manual H-Frame Hydraulic Press

Pressing bearings, straightening shafts, and bending stock all call for steady force you can control. The Dake M-30 30-Ton Manual H-Frame Press gives your shop that force with no motor, no wiring, and no power hookup.

• Manual Hydraulic Pump Needs No Power Hookup - The press runs by hand with no motor, so you can set it anywhere in the shop without a dedicated circuit.
• H-Frame Uprights Make Room for Larger Parts - Two uprights share the load, and 23.5 inches between them leaves space for wider parts and fixtures.
• 27.5 Inch Working Range Fits Short and Tall Work - The ram-to-table distance runs from 0 to 27.5 inches, so you can set up for small bushings or taller assemblies.
• 6 Inch Ram Travel Gives Controlled Pressing - Six inches of ram travel lets you move the part slowly and steadily through each press.

Set the part on the table, pump the handle, and press it into place with steady control.