Dake M-20 20-Ton Manual H-Frame Hydraulic Press

Pressing bearings, bushings, and pins takes steady force, and not every shop wants to run power to a press. The Dake M-20 20-Ton Manual H-Frame Press delivers 20 tons of hand-operated hydraulic force with no motor or wiring required.

• Manual Hydraulic Pump Works Without Power - The hand-operated pump builds up to 4,351 PSI, so you can set the press anywhere in the shop without an outlet nearby.
• 20-Ton Capacity Handles Everyday Press Work - Twenty tons of force covers common jobs like pressing bearings, bushings, and pins in and out of housings.
• Open Working Range Fits a Variety of Parts - With up to 27-1/2 inches from ram to table and 19-1/2 inches between uprights, the frame takes on a wide range of part sizes.
• USA-Built H-Frame Supports the Load Evenly - The press is made in the USA, with two uprights that carry the load evenly on both sides of the work.

Set it anywhere in the shop, pump the handle, and press a worn bearing out of a hub with steady, controlled force.