Dake E-10 10-Ton Electric H-Frame Hydraulic Press

Hand pumping a press through a long run of bearing or bushing work wears you down and slows the job. The Dake E-10 10-Ton Electric H-Frame Press uses a 1 HP electric pump to do the pumping for you on standard 110V shop power.

• Electric Pump Removes Hand Pumping - The 1 HP pump builds pressure on single phase 110V power, so you can press part after part without wearing out your arm.
• Double Acting Cylinder Returns the Ram Under Power - Hydraulic pressure drives the ram down and pulls it back up, giving you steady control over where the ram sits.
• H-Frame Construction Limits Frame Flex - The upright H-frame spreads pressing force evenly through the frame to help keep pressure even across the part.
• 4 to 40 Inch Working Range Fits Short and Tall Parts - With 20 inches of bed width and 10 inches of ram stroke, the press handles small bushings and larger assemblies alike.

Set the part on the bed, bring the ram down under power, and press out a stubborn bearing without stopping to pump.