Wilton Bench Vises
Finding the right Wilton bench vise comes down to jaw width, application type, and base configuration. Use the guide below to match each series to your shop and workload.
Wilton Combination Pipe and Bench Vises
The C Series handles pipe and flat stock from one station, with USA-made cast iron construction and 360° swivel bases. These are Wilton's heaviest-duty bench vises for shops that hold both stock and pipe regularly.
Wilton C0 3-1/2" Combination Pipe and Bench Vise
- Jaw width: 3-1/2"
- Throat depth: 4-1/2"
- Base: 360° swivel
The entry point in the C Series — built for lighter combination pipe and bench work in a compact footprint.
Wilton C1 4-1/2" Combination Pipe and Bench Vise
- Jaw width: 4-1/2"
- Throat depth: 4-3/4"
- Base: 360° swivel
A step up in jaw width and throat depth for shops that need more grip capacity from their combination vise.
Wilton C2 5" Combination Pipe and Bench Vise
- Jaw width: 5"
- Throat depth: 5-1/2"
- Base: 360° swivel
Mid-range C Series capacity for shops that regularly hold wider stock and larger pipe at the same station.
Wilton C3 6" Combination Pipe and Bench Vise
- Jaw width: 6"
- Throat depth: 6-1/2"
- Base: 360° swivel
The largest C Series model — built for heavy combination pipe and bench work where maximum jaw width and throat capacity matter.
Wilton Machinist Bench Vises
The S Series delivers precision-ground jaws and deep throat capacity for accurate metalworking and tool room tasks. Built in four sizes from 3" to 6".
Wilton 300S 3" Machinist Bench Vise
- Jaw width: 3"
- Throat depth: 2-5/8"
- Base: 360° swivel
The compact entry into the S Series — a precise machinist vise for smaller tool room and bench work.
Wilton 400S 4" Machinist Bench Vise
- Jaw width: 4"
- Throat depth: 3-1/2"
- Base: 360° swivel
More jaw width and throat depth for shops that hold a wider range of parts with precision at the bench.
Wilton 500S 5" Machinist Bench Vise
- Jaw width: 5"
- Throat depth: 4-1/2"
- Base: 360° swivel
A strong mid-size machinist vise for shops doing consistent precision work across a range of part sizes.
Wilton 600S 6" Machinist Bench Vise
- Jaw width: 6"
- Throat depth: 5-1/2"
- Base: 360° swivel
The largest S Series model — built for demanding machinist and tool room work where jaw width and throat depth matter most.
Wilton Tradesman Bench Vises
The Tradesman series is built for daily general shop use, with 360° swivel bases and four mounting points across all four jaw widths. A solid choice for craftsmen who need a dependable all-purpose vise at the bench.
Wilton 1745 4-1/2" Tradesman Bench Vise
- Jaw width: 4-1/2"
- Jaw opening: 3-1/2"
- Throat depth: 3-1/4"
The compact entry to the Tradesman line — a reliable everyday vise for smaller parts and general shop clamping.
Wilton 1755 5-1/2" Tradesman Bench Vise
- Jaw width: 5-1/2"
- Jaw opening: 5"
- Throat depth: 3-3/4"
A mid-size Tradesman vise for shops that handle a broader range of stock sizes in daily use.
Wilton 1765 6-1/2" Tradesman Bench Vise
- Jaw width: 6-1/2"
- Jaw opening: 6"
- Throat depth: 4"
A large-capacity Tradesman vise for shops that regularly hold wider parts and need more jaw reach.
Wilton 1780A 8" Tradesman Bench Vise
- Jaw width: 8"
- Jaw opening: 6-3/4"
- Throat depth: 4-3/4"
The full-size Tradesman — best for shops that hold large parts and need maximum jaw width for daily heavy work.
Wilton Tradesman Xtreme Condition Bench Vises
The XC Series shares the Tradesman jaw widths and swivel base but adds a corrosion-resistant build for outdoor jobsites and harsh shop environments.
Wilton 1745XC 4-1/2" Tradesman Xtreme Condition Bench Vise
- Jaw width: 4-1/2"
- Jaw opening: 3-1/2"
- Throat depth: 3-1/4"
The compact XC — same jaw width as the 1745 with a corrosion-resistant build for outdoor and harsh-environment use.
Wilton 1755XC 5-1/2" Tradesman Xtreme Condition Bench Vise
- Jaw width: 5-1/2"
- Jaw opening: 5"
- Throat depth: 3-3/4"
Mid-size XC capacity for outdoor or jobsite shops that need a wider grip range in a corrosion-resistant vise.
Wilton 1765XC 6-1/2" Tradesman Xtreme Condition Bench Vise
- Jaw width: 6-1/2"
- Jaw opening: 6"
- Throat depth: 4"
A large-capacity XC vise for shops and jobsites that hold wider parts in demanding or outdoor conditions.
Wilton 1780XC 8" Tradesman Xtreme Condition Bench Vise
- Jaw width: 8"
- Jaw opening: 6-3/4"
- Throat depth: 4-3/4"
Full 8" jaw width with the XC corrosion-resistant build — the right choice for heavy outdoor or jobsite clamping.
Wilton Mechanics Bench Vises
The Mechanics Series includes a built-in pipe jaw for holding round stock and pipe alongside flat workpieces. A practical choice for automotive shops and general mechanical work where both jaw types see regular use.
Wilton 744 4" Mechanics Bench Vise
- Jaw width: 4"
- Pipe jaw: 1/4" – 2"
- Base: 360° swivel
A compact mechanics vise for lighter automotive and general bench work that also needs occasional pipe holding.
Wilton 745 5" Mechanics Bench Vise
- Jaw width: 5"
- Pipe jaw: 1/4" – 2-1/2"
- Base: 360° swivel
A mid-size mechanics vise for shops that hold a wider range of flat stock and pipe in everyday use.
Wilton 746 6" Mechanics Bench Vise
- Jaw width: 6"
- Pipe jaw: 1/4" – 3-1/2"
- Base: 360° swivel
A larger mechanics vise for heavier automotive and shop work where both flat and pipe holding see frequent daily use.
Wilton 748A 8" Mechanics Bench Vise
- Jaw width: 8"
- Pipe jaw: 1/4" – 3-1/2"
- Base: 360° swivel
The full 8" mechanics vise for heavy shop work that regularly demands wide flat jaw and pipe jaw capacity together.
Wilton Mechanics Pro Bench Vises
The Mechanics Pro Series steps up jaw opening capacity and build weight over the standard Mechanics line. Five sizes from 4-1/2" to 10" suit shops that do heavier mechanical work across a wide range of part sizes.
Wilton 845M 4-1/2" Mechanics Pro Bench Vise
- Jaw width: 4-1/2"
- Jaw opening: 4"
- Base: 360° swivel
The compact entry to the Pro line — more jaw opening than the standard Mechanics for shops doing heavier varied work.
Wilton 855M 5-1/2" Mechanics Pro Bench Vise
- Jaw width: 5-1/2"
- Jaw opening: 5"
- Base: 360° swivel
A solid mid-size Pro vise for shops that need more grip capacity than the compact 845M for everyday mechanical work.
Wilton 865M 6-1/2" Mechanics Pro Bench Vise
- Jaw width: 6-1/2"
- Jaw opening: 6"
- Base: 360° swivel
A large-capacity Pro vise for shops doing heavy mechanical and automotive work across a wide range of part sizes.
Wilton 880M 8" Mechanics Pro Bench Vise
- Jaw width: 8"
- Jaw opening: 8-1/2"
- Base: 360° swivel
An 8" Pro vise with a deep 8-1/2" jaw opening for shops that regularly hold large parts and assemblies.
Wilton 8100M 10" Mechanics Pro Bench Vise
- Jaw width: 10"
- Jaw opening: 12"
- Base: 360° swivel
The largest Pro model — 10" jaw width and 12" opening for shops that hold the biggest parts at the bench.
Wilton Shop Bench Vises
The Shop Series gives you a dependable 360° swivel vise for general bench clamping in four jaw widths. A straightforward choice for everyday shop use where a reliable all-purpose vise gets the job done.
Wilton WS4 4" Shop Bench Vise
- Jaw width: 4"
- Jaw opening: 4"
- Base: 360° swivel
A compact shop vise for light to mid-range bench clamping in smaller shops or secondary work stations.
Wilton WS5 5" Shop Bench Vise
- Jaw width: 5"
- Jaw opening: 5"
- Base: 360° swivel
A mid-size shop vise for everyday bench work where a wider jaw handles a broader range of stock sizes.
Wilton WS6 6" Shop Bench Vise
- Jaw width: 6"
- Jaw opening: 6"
- Base: 360° swivel
A larger shop vise for general bench clamping tasks that need more jaw width and a deeper grip range.
Wilton WS8 8" Shop Bench Vise
- Jaw width: 8"
- Jaw opening: 8"
- Base: 360° swivel
The full-size Shop vise — 8" jaw width for shops that hold large workpieces and need maximum everyday capacity.
Wilton High-Visibility Safety Bench Vises
The High-Visibility Safety Series uses a bright finish to make the vise easy to spot in busy or safety-sensitive shops and jobsites. Both models include a built-in pipe jaw and 360° swivel base.
Wilton 1550 5" High-Visibility Safety Bench Vise
- Jaw width: 5"
- Throat depth: 3-3/4"
- Base: 360° swivel
A mid-size safety vise with high-contrast finish and built-in pipe jaw for shops where tool visibility matters.
Wilton 1560 6" High-Visibility Safety Bench Vise
- Jaw width: 6"
- Throat depth: 4-1/8"
- Base: 360° swivel
More jaw width for shops that need high-visibility workholding on larger parts in safety-conscious environments.
Wilton Utility Bench Vises
The Utility Series covers light to mid-range clamping tasks with a compact build and 360° swivel base. Three jaw widths suit different bench setups without the weight of a heavy-duty vise.
Wilton 674U 4-1/2" Utility Bench Vise
- Jaw width: 4-1/2"
- Jaw opening: 4"
- Throat depth: 4"
A compact utility vise for light bench clamping where a small, practical footprint matters more than maximum capacity.
Wilton 675U 5-1/2" Utility Bench Vise
- Jaw width: 5-1/2"
- Jaw opening: 5"
- Throat depth: 3-1/4"
More jaw width for utility clamping tasks on mid-size parts without moving up to a full-size shop vise.
Wilton 676U 6-1/2" Utility Bench Vise
- Jaw width: 6-1/2"
- Jaw opening: 6"
- Throat depth: 4"
The largest Utility model — handles wider parts and gives you the most jaw range in the lightweight utility build.
Wilton Utility HD Bench Vises
The Utility HD Series steps up from the standard Utility line with a heavier build and greater jaw opening for more demanding everyday clamping. Both models use a 360° swivel base with four mounting points.
Wilton 656UHD 6-1/2" Utility HD Bench Vise
- Jaw width: 6-1/2"
- Jaw opening: 6-1/4"
- Throat depth: 4-1/4"
The 6-1/2" HD model for shops that need more jaw opening and build weight than the standard Utility line provides.
Wilton 648U 8" Utility HD Bench Vise
- Jaw width: 8"
- Jaw opening: 8-1/2"
- Throat depth: 4-1/2"
The full 8" HD model — maximum jaw width and opening for shops that demand more from a utility build.
Wilton General Purpose Bench Vises
The General Purpose Series covers basic bench clamping in three jaw widths with a 120° swivel base. A practical starting point for light shop tasks and occasional use.
Wilton 4" General Purpose Bench Vise
- Jaw width: 4"
- Throat depth: 2-1/4"
- Base: 120° swivel
The compact entry — a simple, dependable vise for light bench clamping on smaller parts.
Wilton 5" General Purpose Bench Vise
- Jaw width: 5"
- Throat depth: 2-1/2"
- Base: 120° swivel
A mid-size general purpose vise for everyday bench work that needs a bit more jaw width and grip range.
Wilton 6" General Purpose Bench Vise
- Jaw width: 6"
- Throat depth: 3"
- Base: 120° swivel
The largest General Purpose model for shops that want basic bench clamping with a wider jaw at a practical price.
Wilton Reversible Bench Vises
The Reversible Series lets you flip the jaw to extend opening capacity when standard positioning is not enough. All three models use a 360° swivel base for flexible positioning at the bench.
Wilton 4550R 5-1/2" Reversible Bench Vise
- Jaw width: 5-1/2"
- Throat depth: 3-3/4"
- Base: 360° swivel
A compact reversible vise for shops that need flexible jaw positioning without moving up to a larger fixed model.
Wilton 4650R 6-1/2" Reversible Bench Vise
- Jaw width: 6-1/2"
- Throat depth: 4"
- Base: 360° swivel
Mid-size reversible capacity for shops that regularly hold wider parts and want extended jaw opening on demand.
Wilton 4800R 8" Reversible Bench Vise
- Jaw width: 8"
- Throat depth: 4-3/4"
- Base: 360° swivel
The full-size reversible — 8" jaw width with a 9-1/4" standard opening and 14-1/2" reversed opening for maximum flexibility.
Wilton Multi-Purpose Bench Vises
The Multi-Purpose Series combines a flat jaw and a built-in pipe jaw in three sizes, giving shops a single station for stock and pipe work. All three use a 360° swivel base.
Wilton 450P 4-1/2" Mult-Purpose Bench Vise
- Jaw width: 4-1/2"
- Jaw opening: 4"
- Pipe jaw: 5/8" – 2-1/4"
The compact multi-purpose entry for shops that need a flat jaw and pipe jaw in a single small-footprint vise.
Wilton 550P 5-1/2" Mult-Purpose Bench Vise
- Jaw width: 5-1/2"
- Jaw opening: 5"
- Pipe jaw: 5/8" – 2-1/4"
A mid-size multi-purpose vise for shops that hold a wider range of flat stock and pipe at the same bench station.
Wilton 650P 6-1/2" Mult-Purpose Bench Vise
- Jaw width: 6-1/2"
- Jaw opening: 6"
- Pipe jaw: 5/8" – 3"
The largest multi-purpose model for shops needing maximum jaw width and expanded pipe capacity at one station.
Wilton Compact and Clamp-On Bench Vises
These small-footprint and clamp-mount vises are built for secondary bench stations, portable setups, and tasks that do not need a full-size vise. Six models cover bolt-on and clamp-on mounting in sizes from 2-1/2" to 4".
Wilton 150 3" Clamp-On Stationary Bench Vise
- Jaw width: 3"
- Throat depth: 2-5/8"
- Base: clamp-on stationary
The most affordable entry — a simple clamp-on stationary vise for occasional light bench work where permanent mounting is not an option.
Wilton SBV-65 2-1/2" Super Junior Bench Vise
- Jaw width: 2-1/2"
- Throat depth: 1-3/4"
- Base: swivel
A compact bolt-on Super Junior vise for secondary stations and light tasks where a small swivel vise is all you need.
Wilton CBV-65 2-1/2" Super Junior Clamp On Bench Vise
- Jaw width: 2-1/2"
- Throat depth: 1-3/4"
- Base: clamp-on
Same compact jaw width as the SBV-65 with a clamp-on base for benches where permanent bolt mounting is not practical.
Wilton 153 3" Clamp-On Swivel Base Bench Vise
- Jaw width: 3"
- Throat depth: 2-5/8"
- Base: clamp-on swivel
Adds a swivel base to the 3" clamp-on build for shops that want flexible positioning without permanent bench mounting.
Wilton SBV-100 4" Super Junior Bench Vise
- Jaw width: 4"
- Throat depth: 2"
- Base: swivel
A wider Super Junior bolt-on vise for secondary stations that handle slightly larger parts than the compact SBV-65.
