Dake 00 1-Ton Single Leverage Arbor Press Driving bearings, bushings, and pins in with a hammer can mar parts and knock them out of line. The Dake...
View full detailsDake arbor presses give you steady, controlled force for pressing bearings, bushings, and pins. Choose by capacity and leverage type.
Choose your Dake Arbor Press
We also carry Dake Arbor Press Accessories to give your press its own steady floor station.
Save $ -465.00
Dake 00 1-Ton Single Leverage Arbor Press Driving bearings, bushings, and pins in with a hammer can mar parts and knock them out of line. The Dake...
View full details
Save $ -795.00
Dake 0 1.5-Ton Single Leverage Arbor Press Pressing bearings, bushings, and pins by hand or with a hammer can damage parts and throw off alignment...
View full details
Save $ -1,300.00
Dake 1 3-Ton Single Leverage Arbor Press Pressing bearings, bushings, and pins with a hammer can damage parts and throw off alignment. The Dake 1...
View full details
Save $ -1,530.00
Dake 1.5 3-Ton Ratchet Leverage Arbor Press A fixed lever arm can force you into awkward positions when pressing bearings, bushings, or pins. The ...
View full details
Save $ -2,300.00
Dake 1 1/2 B 3-Ton Broaching Ratchet Leverage Arbor Press A fixed lever arbor press can leave you pulling from an awkward angle, especially throu...
View full details
Save $ -3,400.00
Dake 2.5 6-Ton Compound Leverage Arbor Press Press-fit, staking, and riveting jobs go poorly when you have to fight a lever to build enough press...
View full detailsChoosing the right Dake arbor press comes down to capacity, leverage type, and the size of the parts you press. Use the guide below to match each model to your work.
These presses use one lever and a geared ram for direct, controlled force. They suit bearing, bushing, and pin work in repair and assembly.
A compact choice for light pins, bushings, and small bearings on a crowded bench.
A step up in force for shops that press small parts often and need more than 1 ton.
A full-size single leverage press for repair and assembly work that needs 3 tons.
These presses add a ratchet lever or compound linkage so you can apply strong force with less strain. They fit taller parts, broaching, and heavier press work.
Adds a ratchet lever and handwheel ram advance for comfortable 3-ton batch work.
Built for keyway broaching and tall parts with an 18-1/4" stroke and ratchet lever.
The highest capacity press in this lineup for heavy press fit, staking, and riveting work.
The Dake 1 1/2 B is built for broaching. It has an 18-1/4" stroke and throat height with 7" of throat depth, so long keyway broaches and taller parts fit. The ratchet lever and handwheel ram advance keep repeat strokes steady.
Yes, for select models. The Dake Pedestal for 1 & 1.5 Arbor Presses and the Dake Pedestal for 1 1/2 B, & 2.5 Arbor Presses are built from welded steel. Each has a shelf and mandrel catcher. See all Dake Arbor Press Accessories.