Oliver 6910 Oscillating Spindle Sander
Are you pushing a smaller sander past its limits and fighting to keep up with long shaping sessions in the shop?
What if your curve work stayed smooth and predictable, even when you are running larger parts or longer production runs?
Meet the Oliver 6910, a floor-standing spindle sander built for steady control and all-day shaping in a professional shop.
With its cast iron table, long 1-1/2 inch oscillation, and oil-bath drive system, it delivers the consistent performance heavy curve work demands.
When the machine stays cool and stable under load, you stay focused on clean fits and the finish quality your work calls for.
Built for Long, Steady Curve Work
The 6910 gives professional shops the stability, capacity, and duty cycle needed for controlled shaping across a wide range of curves and profiles.
Large Cast Iron Table for Confident Support
The 25-1/4 by 27-1/4 inch cast iron table holds parts steady so you can guide the work without fighting vibration. Its 45-degree tilt and corner cutout improve access and positioning on complex shapes.
Oil-Bath Oscillation for Cooler, Cleaner Cutting
The oscillation system runs in a sealed oil bath for long life and smooth motion. With 1-1/2 inches of travel and 75 strokes per minute, the spindle stays cooler and leaves a cleaner surface with less burning.
Ten Spindles for Wide Range Shaping
The 6910 includes ten spindle sizes from 1/4 inch up to 4 inches in diameter, giving you control over tight inside curves and broad sweeping arcs. Quick-change threaded spindles keep setup simple during busy shop days.
Heavy Cabinet and Industrial Controls
The welded steel cabinet adds mass for stability and provides built-in storage for spindles and inserts. Industrial push-button controls sit at a comfortable height for quick, safe operation throughout the day.
What’s Included
What’s Included? Oliver 6910
-
Oliver 6910 Oscillating Spindle Sander — Floor-standing unit with cast iron table and oil-bath oscillation system built for heavy shaping work.
-
Ten Spindles — 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/2", 2", 3", and 4" diameters for tight curves and wide profiles.
-
Three Table Inserts — Matches spindle choices and keeps the table opening tight for cleaner support.
-
Built-In Storage — Holds spindles and inserts for quick access during busy production days.
-
4" Dust Port — Connects to shop dust collection for cleaner operation and better visibility.
Specs
Oliver 6910 Specifications
-
Model Number: 6910
-
Stock Number: 6910.003
-
Table Material: Cast Iron
-
Table Size: 25-1/4" × 27-1/4"
-
Table Tilt: 0° to 45°
-
Table Height: 42-1/2"
-
Number of Table Inserts: 3
-
Spindle Speed: 1,720 RPM
-
Oscillation Travel: 1-1/2"
-
Oscillation Lubrication: 90-weight gear oil
-
Dust Port: 4"
-
Included Spindles: 1/4" × 5", 3/8" × 6", 1/2" × 6", 5/8" × 6", 3/4" × 9", 1" × 9", 1-1/2" × 9", 2" × 9", 3" × 9", 4" × 9"
-
Footprint: 19-1/2" L × 18-1/2" W
-
Motor: 2HP, 115/230V, prewired 115V plug (6/8 Amp)
-
Overall Dimensions: 25-1/4" × 27-1/4" × 50"
-
Net Weight: 295 lbs
-
Gross Weight: 320 lbs
