Laguna PX|12 Benchtop Planer
Are your boards coming off the saw rough, uneven, or tough to clean up to a true thickness?
What if you could run stock through a compact planer and get a smooth, predictable finish every time?
Meet the Laguna PX|12, a 12 inch benchtop planer built around the upgraded QuadTec II cutterhead for cleaner cuts and steady performance.
With its four-sided carbide inserts, strong 2 HP motor, and simple feed setup, it brings reliable milling to any small shop.
When your planer gives you consistent results pass after pass, you spend less time fixing mistakes and more time building work you’re proud of.
Smooth, Steady Milling in a Compact Footprint
A benchtop planer made for the craftsman who wants clean cuts, less tearout, and dependable thicknessing.
QuadTec II Cutterhead Controls Tearout
The PX|12 uses 26 solid carbide inserts arranged in a straight line to handle hardwood grain without pulling or chipping. Each insert has four fresh edges that rotate without special jigs, and the cutterhead runs quieter than traditional straight knives. This gives you clean passes even on tough stock.
2 HP Motor Holds a Steady Cut
The 2 HP universal motor spins the cutterhead at 10,000 RPM, giving the planer enough strength to maintain speed under load. This helps the machine cut smoothly and reduces the chance of burning or uneven spots when working with dense material.
Flip-Down Extensions Support Longer Boards
Integrated flip-down extensions stabilize stock as you feed it, helping reduce snipe on both ends. The extra support keeps the workpiece flatter and makes it easier to manage longer or heavier boards during milling.
Compact Size With Real Shop Capability
At just 65 pounds, the PX|12 is easy to move, set up, or store, yet its 12-1/2 inch width capacity and 26 FPM feed speed make it capable of real everyday milling. It fits well in small shops without giving up cut quality or consistency.
What’s Included
What’s Included: Laguna PX|12 Benchtop Planer
-
Laguna PX|12 Planer — Complete 12 inch benchtop planer built around the QuadTec II cutterhead.
-
QuadTec II Cutterhead (installed) — Comes pre-equipped with 26 four-sided carbide inserts for clean, long-lasting cuts.
-
Flip-Down Table Extensions — Provides added stock support to help reduce snipe and steady long boards.
-
4" to 2-1/2" Dust Port Adapter — Allows connection to common shop vacuums and dust collectors.
-
User Manual — Setup, safety, and maintenance guidance for everyday shop use.
Specs
Laguna PX|12 Specifications
-
Motor: 110V, 2 HP Universal, 50/60Hz, 15 Amp
-
Circuit Requirement: 20 Amp
-
Bed Size: 12-1/2" x 10-1/4"
-
Pull-Out Extensions: Two 11-1/4" flip-down extensions
-
Max Depth of Cut: 3/32"
-
Max Stock Thickness: 6"
-
Min Stock Thickness: 5/32"
-
Min Stock Length: 10"
-
Max Stock Width: 12-1/2"
-
Feed Speed: 26 FPM
-
Dust Port Diameter: 4" with step-down to 2-1/2"
-
Cutterhead RPM: 10,000
-
Cutterhead Diameter: 1-7/8"
-
Inserts: 26 four-sided carbide inserts (4-row), indexed for easy rotation
-
Noise (1m): 92 dB
-
Thickness Readout: Hairline gauge
-
Dimensions (Set Up): approx. 24" x 34"
-
Shipping Dimensions: 25" x 17" x 21-1/2"
-
Net/Ship Weight: 65 / 72 lbs
-
Plug: NEMA 5-15P
-
Manual: Laguna PX|12 Manual
