JET VBS-1207VS-DC 12" Vertical Metal Bandsaw
Are you losing time fighting a bandsaw that forces you to stop and change gears every time the material or cut changes?
What if your saw could match cutting speed to the job in a single smooth motion, without interrupting your workflow?
Meet the JET VBS-1207VS-DC 12" Vertical Metal Bandsaw, a compact variable speed machine built for metal cutting in shops where floor space and precision both matter.
With the VBS-1207VS-DC, you get a brushless DC motor, a continuous variable speed range from 80 to 1200 SFPM, a 12-inch throat capacity, and an integrated chip blower and LED work light built into the machine.
When you need clean cuts on metal pipe, sheet, or profile stock without stopping to adjust gears or clean the table, this saw keeps you moving.
JET VBS-1207VS-DC for Precise Metal Cutting in Compact Shops
Brushless DC Motor Delivers Consistent Cutting Power
The brushless DC motor on the VBS-1207VS-DC runs with reduced heat and less mechanical wear than a brushed motor. That means steady torque through the cut and a longer service life before maintenance is needed.
Continuous Variable Speed Dial Matches Blade Speed to Material
The variable speed control runs from 80 to 1200 SFPM and adjusts without stopping the machine. You can move between soft metals and harder stock by turning the dial, keeping the blade speed where it needs to be for a clean, controlled cut.
Integrated Chip Blower Keeps the Cut Line Clear
The internal chip blower directs air across the table to clear metal chips away from the blade path. You keep a clear view of your layout line without stopping to brush the table clean.
LED Work Light and Blade Safety System Support Shop Safety
Low-temperature LED lighting illuminates the cutting zone without adding heat near the blade. A blade breakage sensor shuts the machine down if the blade fails, reducing the risk of damage or injury during unattended cuts.
What's Included
What's Included? JET VBS-1207VS-DC 12" Vertical Metal Bandsaw
-
JET VBS-1207VS-DC Vertical Metal Bandsaw — The main machine, fully assembled and ready for shop use with all integrated features installed.
Specs
JET VBS-1207VS-DC 12" Vertical Metal Bandsaw Specifications
- Stock Number: JT1-1375
- Model Number: VBS-1207VS-DC
- Motor: 1 HP, Single Phase
- Voltage: 110V
- Amps: 15A
- Blade Speeds: Variable 80–1200 SFPM
- Blade Length: 98.81–102.27 in.
- Blade Width (Min.–Max.): 0.118–0.51 in.
- Throat Capacity: 12 in.
- Table Size (L x W): 15.94 x 19.68 in.
- Table Height: 34.84 in.
- Table Tilt: 45° Right / 15° Left
- Assembled Dimensions (L x W x H): 33.07 x 22.83 x 61.42 in.
- Net Weight: 348 lbs.
- Gross Weight: 382 lbs.
- Warranty: 2 Year
- User manual available: VBS-1207VS-DC Manual (1.95 MB)
