JET JSG-6DCK Closed Stand 6" x 48" Belt / 12" Disc Sander
Are you losing time switching between machines to get flat surfaces, clean angles, and smooth edges on your workpieces?
What if one machine handled belt and disc sanding in a single setup, with the power to keep up through hardwoods and heavy stock removal?
Meet the JET JSG-6DCK Closed Stand 6" x 48" Belt / 12" Disc Sander, a combination sander built for shops that need consistent results without the footprint of two separate machines.
With the JSG-6DCK, you get a 1.5 HP motor, a full 6" x 48" belt, a 12" cast iron disc table, and a heavy-duty closed stand with integrated casters — all in one ready-to-use package.
When your sanding station is dialed in and built to last, you can move through stock prep, shaping, and finishing work with less setup and more confidence.
JET JSG-6DCK for Flat, Angled, and Contour Sanding Work
Graphite-Covered Steel Platen Reduces Heat Buildup
The steel platen behind the belt is covered in graphite to reduce friction during use. This keeps both the belt and the platen running cooler, which extends belt life and helps the machine hold up over time. Less heat means less degradation, so your consumables and your machine last longer between replacements.
Dual Cast Iron Tables with Positive Stops at 90° and 45°
Both the belt and disc tables are precision-ground cast iron with positive stops at 90° and 45°. The belt table tilts to work vertically, horizontally, or anywhere in between, giving you flexibility for flat stock, mitered edges, and contour work. Positive stops eliminate guesswork and keep your setups repeatable from one piece to the next.
Tracking Adjustment with Quick-Lock Handle Keeps the Belt on Track
The tracking knob uses a quick-lock handle to hold belt alignment once it is set. The dual thumbscrew design locks the adjustment in place so the belt stays on track under load. You spend less time stopping to correct drift and more time moving through your work.
Closed Stand with Integrated Casters and Single 4" Dust Port
The one-piece formed steel stand is heavy-duty and keeps the machine stable on the shop floor. Built-in locking casters let you move the sander when you need to reconfigure your space, then lock it in place when it is time to work. A single 4" dust port at the base pulls dust from both the belt and disc into one collection point, keeping your workspace cleaner without additional fittings.
What's Included
What's Included? JET JSG-6DCK Closed Stand 6" x 48" Belt / 12" Disc Sander
-
6" x 48" Belt Sander — Full-width belt sanding surface for flat stock removal, shaping, and edge work.
-
12" Disc Sander — Cast iron disc table with positive stops for flat and angled sanding.
-
Heavy-Duty Closed Stand with Casters — One-piece formed steel stand with integrated locking wheels for stable use and easy repositioning.
-
Sanding Belt — Installed and ready for use out of the box.
Specs
JET JSG-6DCK Closed Stand 6" x 48" Belt / 12" Disc Sander Specifications
-
Stock Number: JT9-708598K
-
Model Number: JSG-6CS
-
Motor Power: 1-1/2 HP
-
Motor Amps: 12A / 6A
-
Belt Size: 6" x 48"
-
Disc Diameter: 12"
-
Dust Port Outside Diameter: 4"
-
Stand Style: Closed Stand
-
Gross Weight: 277 lbs
-
Warranty: 5 Years
-
Manual: Available for the JSG-6CS
Warning: Cancer and Reproductive Harm. For more information, go to www.P65Warnings.ca.gov/product
