JET JBG-8W 8" Shop Bench Grinder with Wire Wheel
Are your grinding and finishing tasks spread across too many machines, eating up bench space your shop does not have?
What if one compact grinder could handle sharpening, deburring, polishing, and edge blending without taking over your workspace?
Meet the JET JBG-8W 8" Shop Bench Grinder with Wire Wheel, a dual-wheel bench grinder built to cover a full range of material prep and finishing work from a single station.
With the JBG-8W, you get a 1HP motor, cast iron wheel guards, totally enclosed pre-lubricated bearings, and rubber mounts that keep the machine planted while you work.
When your grinder runs steady and your wheels are ready to go, you can move through sharpening, cleaning, and finishing work without interruption.
JET JBG-8W for Grinding, Deburring, and Surface Finishing
Cast Iron Wheel Guards Keep the Work Area Controlled
The cast iron wheel guards on the JBG-8W are built to take daily use without flexing or wearing down. Integrated dust chutes direct debris away from the work surface, keeping your bench cleaner and your sightlines clear. That combination lets you stay focused on the workpiece rather than managing the mess.
Dual-Wheel Setup Handles Two Tasks Without Reconfiguring
The JBG-8W ships with both a vitrified aluminum oxide grinding wheel and a crimped wire wheel already mounted. The 36-grit grinding wheel handles sharpening and stock removal, while the wire wheel works through deburring, surface cleaning, and finishing. Having both wheels ready means you move between tasks without stopping to swap setups.
Rubber Mounts Stabilize the Machine During Use
Rubber mounts are positioned at the base to absorb vibration and prevent the grinder from walking across the bench under load. A machine that stays put lets you work with more control and less fatigue, especially during longer sessions or repetitive passes.
Enclosed Pre-Lubricated Bearings Reduce Maintenance Demands
The totally enclosed, pre-lubricated ball bearings are sealed against dust and debris that are common in any active grinding station. This design reduces the maintenance time required to keep the machine running smoothly and supports consistent performance over the long run.
What's Included
What's Included? JET JBG-8W 8" Shop Bench Grinder with Wire Wheel
-
8" Vitrified Aluminum Oxide Grinding Wheel (36-grit) — handles sharpening, edge work, and material removal at the grinding station.
-
8" Crimped Wire Wheel — used for deburring, surface cleaning, polishing, and light finishing work.
-
Adjustable Tool Rest — positions and supports the workpiece at the wheel for controlled, consistent contact.
-
Cast Iron Wheel Guards with Dust Chutes — protect the operator and direct grinding debris away from the work surface.
-
Rubber Mounts — keep the grinder stable on the bench and reduce vibration transfer during operation.
Specs
JET JBG-8W 8" Shop Bench Grinder with Wire Wheel Specifications
-
Stock Number: JT9-577128
-
Model Number: JBG-8W
-
Motor: 1HP, 115V, Single Phase
-
Wheel Diameter: 8"
-
Wheel Grit: 36
-
Wire Wheel Type: Crimped
-
Shaft Diameter: 5/8"
-
Overall Dimensions (L x W x H): 18-1/2" x 13" x 12"
-
Net Weight: 61.7 lbs
-
Gross Weight: 63.5 lbs
-
Warranty: 2 Year
-
Certifications: UL Listed
Warning: Cancer and Reproductive Harm. For more information, go to www.P65Warnings.ca.gov/product
