JET JBG-10 10" Shop Bench Grinder
Are your grinding and sharpening tasks taking longer than they should because your current bench grinder lacks the power or stability to hold up through a full day of shop work?
What if you had a grinder built from cast iron that stays planted on the bench, runs smoothly under load, and gives you clean results whether you are sharpening a chisel or cleaning up a weld?
Meet the JET JBG-10 10" Shop Bench Grinder, a heavy-duty machine designed to handle grinding, sharpening, and smoothing work in a shop environment where reliability is not optional.
With the JBG-10, you get cast iron wheel guards, pre-lubricated sealed ball bearings, and both fine and coarse vitrified wheels included so the machine is ready to work the moment it comes out of the box.
When your tools are sharp and your machine runs without complaint, the rest of your shop work moves the way it should.
JET JBG-10 for Grinding, Sharpening, and Surface Work
Cast Iron Construction Keeps the Machine Stable Under Load
The cast iron wheel guards add mass and rigidity to the grinder frame. That weight reduces vibration at the wheel, which helps you maintain control and produces a cleaner, more consistent surface finish on the work piece. A bench grinder that moves or chatters forces you to compensate. This one stays put.
Pre-Lubricated Sealed Ball Bearings Support Long-Term Reliability
The totally enclosed, pre-lubricated ball bearings protect the spindle from dust and grinding debris over time. You do not need to service them between jobs. The sealed design keeps the bearings running cleanly so the machine holds its performance in a production shop or a busy home workshop.
Fine and Coarse Vitrified Wheels Cover a Wide Range of Tasks
The grinder ships with both a 24-grit and a 46-grit vitrified wheel. The coarse wheel removes material efficiently for rough shaping and fast stock removal. The fine wheel lets you refine an edge or smooth a surface without switching to a different machine. Both wheels are rated for the 10-inch diameter and one-inch width of this grinder.
Adjustable Tool Rest and Spark Guards Support Accurate, Repeatable Work
The adjustable tool rest gives you a consistent angle reference so you can sharpen tools to the same geometry from one session to the next. The one-piece quick-adjusting spark guards move easily as you change wheel position, keeping the work area clear without slowing down your setup.
What's Included
What's Included? JET JBG-10 10" Shop Bench Grinder
-
24-Grit Vitrified Grinding Wheel — Coarse wheel for fast material removal and rough shaping work.
-
46-Grit Vitrified Grinding Wheel — Fine wheel for refining edges and smoothing surfaces.
-
Adjustable Tool Rest — Holds the workpiece at a consistent angle for repeatable sharpening results.
-
One-Piece Quick-Adjusting Spark Guards — Reposition quickly as wheel clearance changes during use.
-
Cast Iron Wheel Guards with Dust Vents — Protect the operator and allow debris to clear from the wheel area.
-
Heavy-Duty Guarded Toggle Switch — Provides a secure on/off control with protection against accidental activation.
Specs
JET JBG-10 10" Shop Bench Grinder Specifications
-
Model Number: JBG-10B
-
Stock Number: JT9-577103
-
Wheel Diameter x Width: 10" x 1"
-
Wheel Grits: 24 / 46
-
Shaft Diameter: 1"
-
Overall Dimensions (L x W x H): 25" x 16" x 15"
-
Net Weight: 108 lbs
-
Gross Weight: 110 lbs
-
Warranty: 2 Years
Warning: Cancer and Reproductive Harm. For more information, go to www.P65Warnings.ca.gov/product
