JET J-7015 8" x 13" Horizontal Metal Bandsaw
Are you losing time to slow cuts and blades that wear out before the job is done?
What if your horizontal bandsaw could hold a straight cut through heavy stock all day without stopping to reset guides or swap blades ahead of schedule?
Meet the JET J-7015 8" x 13" Horizontal Metal Bandsaw, built for shops that cut metal stock daily and need a machine that holds up to steady production use.
With cast iron and heavy-duty steel construction throughout the head and base, the J-7015 keeps blade tracking stable and cuts accurate from the first piece to the last.
When your saw runs clean and consistent shift after shift, you spend less time managing the machine and more time moving work through the shop.
JET J-7015 for Accurate, High-Volume Metal Cutting
Cast Iron and Steel Construction Eliminates Vibration and Deflection
The head and base of the J-7015 are built from heavy-duty steel and cast iron, forming a rigid platform that resists flex under load. That rigidity keeps the blade on its path through the cut, reducing the drift and deflection that throw off tolerances. You get consistent cut angles whether you are running round stock, rectangular bar, or structural shapes.
Extended Blade Wheel Base Reduces Blade Fatigue
The J-7015 uses an 11-5/8" blade wheel diameter with a longer wheel base than comparable saws in its class. That extended geometry reduces the stress cycle on the blade with every revolution, which translates directly into longer blade life. Fewer blade changes means less downtime and lower operating cost over the life of the machine.
Carbide Blade Guides with Double-Row Ball Bearing Support
Parallel double-row ball bearing carbide blade guides hold the blade in tight alignment through the cut. Stable guide support keeps the blade from wandering under side load, which matters most when you are cutting larger cross-sections at an angle. The guides maintain that support consistently so each piece comes off the saw at the dimension you set.
Hydraulic Downfeed System Controls Cut Rate Through the Material
The fully adjustable hydraulic downfeed system manages how quickly the blade descends through the workpiece. Setting the feed rate to match the material prevents blade overload and keeps cut quality steady across different stock sizes. The system gives you direct control over cut speed without manual intervention during the cut.
What's Included
What's Included? JET J-7015 8" x 13" Horizontal Metal Bandsaw
-
JET J-7015 Horizontal Bandsaw — The main saw unit, fully assembled with head, base, and drive system ready for installation.
-
Quick-Positioning Vise with Adjustable Jaws — Holds workpieces securely at 90° and swivels to 45° for angled cuts, with fully adjustable jaws to fit different stock sizes.
-
Adjustable Material Stop — Sets a repeatable stop position so you can cut multiple pieces to the same length without re-measuring.
Specs
JET J-7015 8" x 13" Horizontal Metal Bandsaw Specifications
-
Stock Number: JT9-414450
-
Model Number: J-7015
-
Motor: 1-1/2 HP, 115/230V, 1Ph
-
Drive: Belt Drive
-
Blade Speeds (SFPM): 82, 132, 170, 235
-
Blade Wheel Diameter: 11-5/8"
-
Round at 90 Degrees: 9"
-
Round at 45 Degrees: 9"
-
Rectangle at 45 Degrees: 9" x 8"
-
Vise Swivel: 45°
-
Overall Dimensions (L x W x H): 62-1/2" x 23" x 48"
-
Net Weight: 551 lbs
-
Gross Weight: 600 lbs
-
Warranty: 2 Year
-
Manual: Available on the JET J-7015 product page
