JET IBG-8 8" Industrial Bench Buffer
Are your buffing and polishing results inconsistent from one piece to the next?
What if your bench buffer could handle the pace of a busy shop without slowing you down or wearing out?
Meet the JET IBG-8 8" Industrial Bench Buffer, built to hold up under the demands of high-volume finishing work.
With the IBG-8, you get a cast iron base, oversized motor shaft, heavy retainer plates, and a safety switch with a removable key that keeps the machine under your control.
When your buffer runs steady shift after shift, you spend less time chasing results and more time finishing work you can stand behind.
JET IBG-8 for High-Volume Buffing and Polishing Work
Cast Iron Base Keeps the Machine Stable Under Load
A heavy cast iron base resists movement during operation. This keeps the buffer planted on the bench so you can work through a full session without stopping to reposition or re-secure the machine. Stability at the base translates directly into consistent contact between the wheel and the workpiece.
Oversized Shaft and Retainer Hardware Handle Daily Demand
The IBG-8 uses an oversized 5/8" motor shaft paired with heavy retainer plates and massive lock nuts. These components are sized for sustained use, not occasional work. They keep the wheel mounted securely so you are not dealing with drift or slop mid-session.
Wide Spacer Range Supports a Variety of Finishing Wheels
The spacer system on the IBG-8 accepts a wide range of finishing wheel configurations. Whether you are switching between buffing compounds, polishing wheels, or specialty media, the machine adapts without requiring a dedicated setup for each application. That flexibility keeps your workflow moving.
Safety Switch with Removable Key Controls Access
The safety switch with a removable key gives you direct control over who can operate the machine. In a shared shop environment, this is a straightforward way to prevent unintended startup. It adds a layer of reliability to your daily routine without adding complexity.
What's Included
What's Included? JET IBG-8 8" Industrial Bench Buffer
-
JET IBG-8 Bench Buffer — the complete buffer unit ready for bench mounting and immediate use in your finishing operation.
Specs
JET IBG-8 8" Industrial Bench Buffer Specifications
- Stock Number: JT9-577408
- Model Number: IBG-8SSB
- Motor: 1HP, 1-Phase
- Motor Amps: 11
- Wheel Diameter x Width: 8" x (see manual)
- Wheel Speed: 3,600 RPM
- Shaft Diameter: 5/8"
- Overall Dimensions (L x W x H): 23-1/4" x 8-5/8" x 9-1/2"
- Net Weight: 38.0 lbs
- Gross Weight: 44.0 lbs
- Warranty: 2 Years
- Certification: CSA/CUS
Warning: Cancer and Reproductive Harm. For more information, go to www.P65Warnings.ca.gov/product
