JET HVBS-712DV 7" x 12" Variable Speed Deluxe Horizontal/Vertical Metal Bandsaw
Are you losing time swapping belts every time a job calls for a different cutting speed?
What if you could dial in the right speed for any metal with a single knob, then flip the same machine to vertical work without changing your setup?
Meet the JET HVBS-712DV 7" x 12" Variable Speed Deluxe Horizontal/Vertical Metal Bandsaw, a machine built to handle both horizontal and vertical cutting demands in one solid unit.
With the HVBS-712DV, you get a sealed hardened and ground gear drive, hydraulic downfeed, and a variable speed DC motor that gives you consistent cutting control across a range of materials and stock sizes.
When your bandsaw can keep up with the variety of cuts your shop demands, you spend less time adjusting and more time working.
JET HVBS-712DV for Horizontal and Vertical Metal Cutting
Variable Speed DC Motor Matches Speed to the Material
The 1HP DC motor delivers blade speeds from 88 to 270 SFPM through a sealed hardened and ground gear drive. You adjust cutting speed with a single knob, no belt changes required. That means faster transitions between jobs and consistent torque at every speed setting.
Hydraulic Downfeed Keeps Cutting Pressure Steady
The hydraulic downfeed controls how the bow descends through the cut. This reduces operator fatigue and keeps blade pressure consistent from start to finish. The result is cleaner cuts and longer blade life on both solid stock and structural material.
Multi-Position Blade Guide Extends Vertical Throat Capacity
In vertical mode, the adjustable blade guide expands the throat capacity from 4 inches to 8 inches. This gives you more clearance for wider material without needing a separate machine. The 9-1/16" x 11-7/8" worktable supports your stock cleanly in vertical position.
Heavy Cast Iron Bow and Bed Holds the Machine Stable Under Load
The cast iron bow and bed resist flex and vibration during the cut. Combined with the sealed gear drive and ball bearing shaft support, the frame keeps blade tracking consistent even during extended production runs. The wider stand with built-in storage cabinet and chip tray keeps the work area organized.
What's Included
What's Included? JET HVBS-712DV 7" x 12" Variable Speed Deluxe Horizontal/Vertical Metal Bandsaw
-
Vertical worktable (9-1/16" x 11-7/8") — supports stock securely when the machine is used in vertical cutting mode.
-
Adjustable toolless material stop — lets you set repeatable cut lengths quickly without reaching for a wrench.
-
Four 8" rubber wheels — allow the machine to be moved around the shop without lifting.
-
Wider stand with built-in storage cabinet and chip tray — keeps blades, accessories, and the work area organized at the machine.
Specs
JET HVBS-712DV 7" x 12" Variable Speed Deluxe Horizontal/Vertical Metal Bandsaw Specifications
-
Stock Number: JT9-415560
-
Model Number: HVBS712DV
-
Motor: 1HP, 115V, 1Ph, 7.5A, 3500RPM DC motor
-
Blade Speeds: 88–270 SFPM
-
Blade Wheel Diameter: 11-3/4"
-
Square Capacity at 90°: 7" x 7"
-
Round Capacity at 90°: 7"
-
Round Capacity at 45°: 5"
-
Rectangle Capacity at 45°: 6" (H) x 4" (W)
-
Vise Swivel: 45°
-
Vertical Worktable: 9-1/16" x 11-7/8"
-
Vertical Throat Capacity (adjusted): 4"–8"
-
Overall Dimensions (L x W x H): 48" x 17" x 44"
-
Net Weight: 374 lbs
-
Gross Weight: 418 lbs
-
Warranty: 2 Years
-
Certifications: CSA/CUS Certified, UL Listed
-
Manual: Available in the Resources section of this page
Warning: Cancer and Reproductive Harm. For more information, go to www.P65Warnings.ca.gov/product
