Edwards 20-Ton Shop Press with Portable Power Unit
Are you looking for a compact press that handles bearing work, metal bending, and straightening without taking up your whole shop floor?
What if your shop had a powerful hydraulic press that was ready to run the moment you plugged it in?
Meet the Edwards 20-Ton Shop Press with Portable Power Unit, a benchtop hydraulic press built for real fabrication work.
Available in 230V single-phase, 230V three-phase, and 460V three-phase configurations, the press fits a range of shop power setups without any compromise in pressing force.
When the press holds steady through a job, you can work through bearings, bends, and straightening with confidence.
Edwards 20-Ton Shop Press for Bearing, Bending, and Straightening Work
Rolling Cylinder Maximizes Tooling Adaptability
The rolling cylinder design lets the press accept a wide range of standard and custom tooling for different jobs. Whether you are pressing bearings, bending plate, or straightening a shaft, the press adapts to the work at hand.
Open-Sided Frame Handles Longer Material
The open-sided frame lets longer stock pass through without obstruction. The 3/8" steel frame holds its structure under full pressing load while keeping the work area accessible.
Hydraulic-Assist Table Keeps the Work at the Right Height
The adjustable work table uses hydraulic assist to move material to the correct working height safely. Lift chains and a bracket are included to support the table through the full range of adjustment.
Hand and Jog Controls Keep Operation Simple
The hand and jog controls give you direct, precise command over the cylinder at every stage of the press cycle. An integrated E-Stop is built into the control so you can stop the press immediately if needed.
What's Included
What's Included? Edwards 20-Ton Shop Press with Portable Power Unit
-
Edwards 20-Ton Shop Press — Provides a compact benchtop hydraulic press platform for bearing, bending, and straightening work.
-
Portable Power Unit — Powers the press via 20' quick-connect hoses for immediate plug-in operation.
-
Lift Chains and Bracket — Supports the hydraulic-assist adjustable work table through its full range of height adjustment.
Specs
Edwards 20-Ton Shop Press with Portable Power Unit Specifications
- Rating: 20 Ton
- Stroke: 6-1/4"
- Steel Frame Thickness: 3/8"
- Product Dimensions: 24" x 27" x 37"
- Minimum Return Speed: 1.667 In./Sec
- Net Weight: 784 lb
- Gross Weight: 800 lb
- Warranty: 1 Year
Specs by Configuration
- 230V, 1Ph — Stock Number: ED9-HAT2010 | Model: HAT2010
- 230V, 3Ph — Stock Number: ED9-HAT2020 | Model: HAT2020
- 460V, 3Ph — Stock Number: ED9-HAT2030 | Model: HAT2030
