Edwards 10-Ton Tube & Pipe Bender with Portable Power Unit
Are you losing time swapping between tools to get clean, accurate bends on pipe and tube?
What if your shop had a single hydraulic bender that handled round pipe, round tube, and square tube up to 180° without extra setup?
Meet the Edwards 10-Ton Tube & Pipe Bender with Portable Power Unit, a hydraulic bending system built for steady fabrication work.
With quick-connect hoses, a built-in degree wheel, and horizontal or vertical operation, this bender plugs in and gets to work without a complicated setup.
When the bender holds position and repeats the same angle accurately, you can move through a run of parts with confidence.
Edwards 10-Ton Bender for Pipe, Tube, and Square Tube Fabrication
Proximity Sensor and Degree Wheel Ensure Repeatable Bends
An integrated proximity sensor and degree wheel work together to confirm each bend angle before you move on. This combination reduces the risk of off-angle parts and keeps results consistent across a full production run.
Horizontal and Vertical Operation Fits Your Project
The bender runs in either a horizontal or vertical position depending on the material and the work at hand. Switching between orientations gives you more control over how you handle longer stock and tighter bends.
Quick-Connect Hoses Speed Setup and Changeover
Twenty-foot quick-connect hoses link the bender to the portable power unit without tools. The plug-and-play connection means less time on setup and more time on the actual bend work.
Rolling Stand Keeps the Bender Mobile
A heavy-duty rolling stand lets you move the bender to where the work is and clear it from the floor when the job is done. Built-in die storage on the frame keeps your tooling close without taking up extra bench space.
What's Included
What's Included? Edwards 10-Ton Tube & Pipe Bender with Portable Power Unit
-
Edwards 10-Ton Tube & Pipe Bender — Provides the bending head, rolling stand, built-in die storage, and degree wheel for accurate hydraulic bending work.
-
Portable Power Unit — Supplies hydraulic power to the bender via 20-foot quick-connect hoses so the machine is ready to use right out of the crate.
Specs
Edwards 10-Ton Tube & Pipe Bender with Portable Power Unit Specifications
- Rating: 10 Ton
- Max Bend: 180°
- Round Pipe Capacity (Sch. 40): 2" ID
- Round Tube Capacity: 2-1/2" OD x .095 wall
- Square Tube Capacity: 2" OD x .25 wall
- Cylinder: 1-3/4" Ram
- Stroke: 14"
- Hydraulics: 3-1/2 GPM
- Valve Pressure: 2750 PSI
- Bender Dimensions (L x W x H): 40-1/2" x 36-1/2" x 42"
- Overall Dimensions with Stand (L x W x H): 66" x 93" x 100"
- Net Weight: 980 lb
- Warranty: 1 Year
Specs by Power Configuration
- 1 Phase 230V — Stock Number: ED9-HAT1010
- 3 Phase 230V — Stock Number: ED9-HAT1020
- 3 Phase 460V — Stock Number: ED9-HAT1040
- 3 Phase 575V — Stock Number: ED9-HAT1050
