Dake Supercut 315 12-1/2" Manual Cold Saw

Dake Supercut 315 12-1/2" Manual Cold Saw

SKU D-9743151PH

The Dake Supercut 315 12-1/2" Manual Cold Saw is a low-production shop cold saw that cuts clean, square ends in metal stock.

44 rpm HSS blade cuts cleaner
Swiveling head miters 45° both ways
Single or three-phase power fits most shops

$ 5,615.50

Lowest Price Guarantee

If you (somehow) find a lower price, call us & we'll beat it: 1-800-727-6553

Choose your Voltage

110V 1PH

220V 3PH

Quantity

BACKORDERED: Available End of March / Early April - Buy now to secure yours!

Questions? Call or Email Us

1-800-727-6553

support@advmachinery.com

Dake Supercut 315 12-1/2" Manual Cold Saw

Cutting steel stock with an abrasive saw leaves hot, burred ends that need cleanup before the next step. The Dake Supercut 315 cuts at a slow 44 rpm for cleaner ends and comes in single-phase 110V or three-phase 220V to fit your shop's power.

Low-Speed HSS Blade Cuts Cleaner Ends - The 12-1/2" high speed steel blade turns at 44 rpm, which keeps heat down and leaves smooth ends with little burr.
Swiveling Head Handles 45° Miters - The head rotates 45° left and right, so you can cut angles in either direction without flipping the stock.
Vise Opens to 4-5/8" for Bar and Tube - The vise clamps solid round up to 2-5/8" and tube up to 3-5/8" at 90° for steady, square cuts.
24V Controls Add Operator Protection - Low voltage controls, an e-stop, and low voltage and thermal overload protection guard both the operator and the motor.

Clamp the stock, set the angle, and cut clean ends on bar and tube that need little cleanup before welding.

What's Included

What's Included? Dake Supercut 315 12-1/2" Manual Cold Saw

Dake Supercut 315 12-1/2" Manual Cold Saw - Provides a steady manual cold saw for clean, square cuts in metal and plastic stock.
Standard HSS Blade - Lets you start cutting right out of the crate.

Specs

Dake Supercut 315 12-1/2" Manual Cold Saw Specifications

Model: Supercut 315
Maximum Blade Diameter: 12-1/2 in
Blade Speed: 44 rpm
Motor: 1.6 HP to 2.35 HP depending on configuration
Cutting Ability: Ferrous, Non-Ferrous, Plastics
Maximum Vise Opening: 4-5/8 in
Miter Range: 45° Left and Right
Solid Round Capacity at 90°: 2-5/8 in
Solid Round Capacity at 45°: 2-1/2 in
Tube Capacity at 90°: 3-5/8 in
Tube Capacity at 45°: 3-1/2 in
Square Capacity at 90°: 3-1/4 in
Square Capacity at 45°: 3-1/8 in
Rectangle Capacity at 90°: 4-1/4 in x 2-3/4 in
Rectangle Capacity at 45°: 3-1/4 in x 2-3/4 in
Control Voltage: 24V
Safety Features: E-Stop, Low Voltage Protection, Thermal Overload Protection
Work Height: 38-1/2 in
Overall Height: 59 in
Overall Width: 26 in
Overall Depth: 36 in
Weight: 450 lb
Country of Origin: USA

Specs by Voltage

110V 1PH: 110V, Single Phase
220V 3PH: 220V, Three Phase

Dake Supercut 315 12-1/2" Manual Cold Saw Manual