Dake Euro 370 S-L Semi-Automatic Cold Saw — Non-Ferrous Head

Dake Euro 370 S-L Semi-Automatic Cold Saw — Non-Ferrous Head

SKU D-976202

The Dake Euro 370 S-L Semi-Automatic Cold Saw — Non-Ferrous Head is a production cold saw that delivers clean, repeatable cuts in non-ferrous metal and plastics.

Automatic clamping vise speeds batch cutting
Three gib guides keep cuts accurate
Rotating head cuts 45 degree miters

$ 25,954.50

Lowest Price Guarantee

If you (somehow) find a lower price, call us & we'll beat it: 1-800-727-6553

Quantity

IN-STOCK: Ships out in 1 to 2 weeks

Questions? Call or Email Us

1-800-727-6553

support@advmachinery.com

Dake Euro 370 S-L Semi-Automatic Cold Saw — Non-Ferrous Head

Cutting non-ferrous bar and plastics in batches is slow work when each part needs careful setup. The Dake Euro 370 S-L Semi-Automatic Cold Saw handles that work with an automatic clamping vise and two blade speeds for clean, repeatable cuts.

Three Gib Guides Keep Cuts Accurate - The cutting head rides on three gib guides, each with two adjustable cast iron gib blocks, so you can tune the head for straight and accurate cuts.
Automatic Clamping Vise Holds Stock Firm - The large vise clamps on its own and has adjustable gib guides, removable face plates, and an anti-burr arm to hold stock steady through each cut.
Rotating Head Cuts Miters to 45° - The head swings up to 45° left for angled cuts and still handles solid round up to 3-5/8" at that angle.
Mesh Discharge Chute Clears Short Parts - Short cut pieces tumble off the outboard section of the table and down a mesh chute, which keeps finished parts out of the cutting area.

Load a length of aluminum tube, set the positive stop, and run a batch of matching parts while the chute clears the short finished pieces.

Dake Euro 370 S-L Semi-Automatic Cold Saw

What's Included

What's Included? Dake Euro 370 S-L Semi-Automatic Cold Saw — Non-Ferrous Head

Dake Euro 370 S-L Semi-Automatic Cold Saw - Gives you a heavy semi-automatic saw set up for cutting non-ferrous metal and plastics.
Saw Blade - Lets you start cutting as soon as the saw is set up.
Coolant - Keeps the blade and stock cool during cutting.
Saw Blade Selector Calculator - Helps you choose the right blade for the material you are cutting.
Blade Change Tool Kit - Gives you the tools needed to swap blades in the shop.
Adjustable Positive Stop - Sets a repeat length so every part in a batch comes out the same.

Specs

Dake Euro 370 S-L Semi-Automatic Cold Saw — Non-Ferrous Head Specifications

Model: 370S-L Non-Ferrous
Part Number: 976202-2
Cutting Ability: Non-Ferrous / Plastics
Voltage: 220V
Phase: 3
Horsepower: 3.5/4.5 HP
Blade Speeds: 1,500/3,000 RPM
Maximum Blade Diameter: 14-1/2"
Blade Compatibility: 14-1/2" or 12"
Maximum Vise Opening: 8-3/4"
Maximum Angle: 45° Left
Slotting: No
Solid Round Capacity at 90°: 4-1/4"
Solid Round Capacity at 45°: 3-5/8"
Tube Capacity at 90°: 5-1/16"
Tube Capacity at 45°: 5"
Square Capacity at 90°: 4-1/4"
Square Capacity at 45°: 3-7/8"
Rectangle Capacity at 90°: 4" x 7"
Rectangle Capacity at 45°: 4" x 6"
Work Height: 35"
Overall Dimensions (H x W x D): 73" x 28" x 39"
Weight: 1,360 lb
Made in the USA
Manual: Instruction and service manual included

WARNING: Cancer – www.P65Warnings.ca.gov

Dake Euro 370 S-L Semi-Automatic Cold Saw — Non-Ferrous Head Manual