Baileigh DDTM-8052-HD 80" × 52" Heavy Duty Metal Downdraft Table
Are you grinding or sanding in a shop where dust and fine particles build up faster than you can manage them?
What if your shop had a downdraft table large enough to handle heavy fabrication work while pulling contaminants down and away from you?
Meet the Baileigh DDTM-8052-HD 80" × 52" Heavy Duty Metal Downdraft Table, a large-format industrial downdraft table built for serious metalworking shops.
With a 5 HP motor, 2340 CFM of airflow, and a three-stage filter system including a HEPA filter, it captures dust and particulates at the source during grinding, sanding, and finishing work.
When the air stays clean and the table holds your work steady, you can focus on the job without stopping to manage the mess.
Baileigh DDTM-8052-HD for Heavy-Duty Grinding and Sanding Work
Large Perforated Work Surface Handles Big Fabrication Jobs
The 78" × 52" perforated steel work surface supports up to 1764 lbs of evenly distributed load, giving fabricators room to work on large weldments, plates, and assemblies. The perforated top draws air evenly across the entire surface so suction stays consistent no matter where work is positioned.
5 HP Motor Delivers Consistent Downdraft Suction
The 5 HP motor runs on 220V three-phase power and produces up to 2340 CFM of downward airflow. That draw pulls grinding dust, sanding debris, and fine particulates away from the operator's breathing zone and into the filter system below.
Three-Stage Filter System Captures Fine Dust
The filter system runs contaminants through aluminum mesh, cartridge, and HEPA stages before air exits the table. All filter maintenance and changes are 100% tool-free, which keeps cleaning time short and keeps the table running at full airflow capacity.
Built-In Accessories Support the Full Work Setup
The table ships with a magnehelic gauge, hinged side and back walls, a work light, 110V and air tool outlets, a 12" overhang, casters, and leveling feet. Everything needed to put the table to work is included without additional purchases.
What's Included
What's Included? Baileigh DDTM-8052-HD 80" × 52" Heavy Duty Metal Downdraft Table
-
Baileigh DDTM-8052-HD Downdraft Table — Provides a large-format perforated work surface with integrated downdraft filtration for grinding and sanding work.
-
Three-Stage Filter Set — Includes aluminum mesh (x2), cartridge (x6), and HEPA filters for full-system filtration right out of the box.
-
Magnehelic Gauge — Monitors airflow pressure so you can track filter condition without guesswork.
-
Hinged Side and Back Walls — Help contain dust and debris at the work surface during grinding and sanding operations.
-
Work Light — Illuminates the work surface for better visibility during detail work.
-
110V and Air Tool Outlets — Allow tools to be plugged in directly at the table without running cords across the shop.
-
Casters and Leveling Feet — Allow the table to be repositioned around the shop and leveled on uneven floors.
Specs
Baileigh DDTM-8052-HD 80" × 52" Heavy Duty Metal Downdraft Table Specifications
- Model: DDTM-8052-HD
- Stock Number: BA9-1017590
- Working Area: 78" x 52"
- Motor: 5 HP
- Input Power: 220V Three Phase
- Maximum CFM: 2340
- Load Capacity: 1764 lbs
- Filter Type: 3-Stage (Aluminum Mesh, Cartridge, HEPA)
- Filter Sizes: Aluminum x2 — 11.3" x 23.8" x 0.86"; Cartridge x6 — 11.25" x 13"; HEPA — 18" x 20" x 5.9"
- Net Weight: 1650 lbs
- Warranty: 1 Year Parts, Lifetime Technical Support
