Baileigh DBG-106-V2 6" × 48" Belt & 9.84" Disc Sander
Are you working in a fabrication or metalworking shop that needs both a wide belt grinder and a large disc grinder in a single floor-saving unit on standard 115V power?
What if one machine gave you a 6-inch by 48-inch belt at 1,653 FPM, a 9.84-inch disc at 2,100 RPM, large tilting support tables up to 45 degrees, and a vacuum port for dust collection?
Meet the Baileigh DBG-106-V2, a 6-inch by 48-inch belt and 9.84-inch disc sander combo built for fabrication, welding, and metalworking shops that need precision metal finishing, burr smoothing, and edge preparation from one compact machine.
With the DBG-106-V2, you get a 1 HP motor on 115V single-phase power, belt tension and tracking adjustments, large support tables that tilt up to 45 degrees, and a vacuum port that keeps the work area clean during grinding and sanding.
When the DBG-106-V2 is running, you get consistent finishing results across metal parts with two grinding surfaces, adjustable support, and dust extraction capability in one machine.
Baileigh DBG-106-V2 for Combined Belt and Disc Grinding and Finishing Work
6" × 48" Belt at 1,653 FPM Handles Wide Material Removal and Finishing
The 6-inch by 48-inch abrasive belt runs at 1,653 FPM for consistent material removal, deburring, and surface finishing on metal parts. Belt tension control and tracking adjustments keep the belt running true and allow quick belt changes without extra tools between jobs.
9.84-Inch Disc at 2,100 RPM Covers Edge Work and Miter Finishing
The 9.84-inch grinding disc rotates at 2,100 RPM for consistent edge finishing and surface preparation on fabricated parts. The large support table tilts up to 45 degrees for miter grinding work without repositioning the workpiece, covering the angled edge work that metal fabrication and welding shops handle regularly.
Large Tilting Support Tables Improve Control and Accuracy
The large support tables on both the belt and disc sections provide stable workpiece support during grinding and sanding operations. Tables angle up to 45 degrees for miter work, giving operators precise control over the grinding angle without additional fixturing between setups.
Vacuum Port and Adjustable Belt System Support Daily Use
The built-in vacuum port connects to a dust collection system to keep chips and abrasive dust out of the work area during grinding. This dust extraction capability is a practical advantage in fabrication shops where clean work areas improve safety and reduce cleanup time at the end of the shift.
What's Included
What's Included? Baileigh DBG-106-V2 6" × 48" Belt & 9.84" Disc Sander
-
6" × 48" Abrasive Belt (80 grit) — installed and ready for material removal and surface finishing on metal parts.
-
9.84" Grinding Disc — installed and ready for edge finishing and miter grinding work.
Specs
Baileigh DBG-106-V2 6" × 48" Belt & 9.84" Disc Sander Specifications
-
Model Number: DBG-106-V2
-
Stock Number: BA9-1230715
-
Motor: 1 HP
-
Power Requirement: 115V, single-phase
-
Belt Size: 6" x 48"
-
Belt Speed: 1,653 FPM
-
Abrasive Grit: 80
-
Disc Diameter: 9.84"
-
Disc Speed: 2,100 RPM
-
Disc Table Tilt: 45°
-
Dust Port: Vacuum port included
-
Net Weight: 215 lb.
-
Warranty: 1 Year
