Baileigh CS-275EU 11" Manual Cold Saw
Are you cutting pipe, tubing, and solid stock in a fabrication shop or maintenance department that needs clean, chatter-free results on 110V power?
What if a manual cold saw gave you 3.25-inch round tube capacity, a European-style cam-lock vise, flood coolant, and 45-degree miter range in both directions?
Meet the Baileigh CS-275EU, an 11-inch manual cold saw built for light metal fabrication, chassis work, and maintenance departments that need accurate cuts without complex setup.
With the CS-275EU, you get a 1.5 HP motor on 110V single-phase power, 54 RPM blade speed, a stop rod for repeat cuts, and a cast iron base that holds the machine steady during cutting.
When the CS-275EU is set up for your material, you get clean, burr-free cuts on pipe, tubing, and solid stock with a machine that stays reliable through daily shop use.
Baileigh CS-275EU for Manual Cold Saw Cutting on Pipe and Tubing
54 RPM Blade Speed Delivers Clean, Burr-Free Cuts
The CS-275EU runs an 11-inch cold saw blade at 54 RPM, producing clean, chatter-free cuts on pipe, tubing, and solid stock without the heat and burrs that abrasive cutting leaves behind. This low blade speed reduces the finishing work needed after each cut and keeps material ends clean for the next operation.
European-Style Vise with Cam Lock Speeds Material Loading
The European-style vise with cam-lock device secures material quickly and provides a clear line of sight to the cut zone. The 3.25-inch round tube capacity at 90 degrees handles the pipe and tubing sizes that fabrication and maintenance shops cut regularly.
45-Degree Miter Range Covers Angled Cutting Work
The CS-275EU miters 45 degrees left and right for angled cuts without repositioning the material. A stop rod allows repeat cuts to be made at the same length without re-measuring between pieces, keeping output consistent on jobs where the same cut repeats across multiple parts.
Flood Coolant and Cast Iron Base Support Accurate Cutting
The integrated flood coolant system lubricates the blade and clears chips during cutting, protecting blade life and improving cut surface quality on longer runs. The cast iron base and sturdy stand minimize vibration and keep the machine stable through daily shop use.
What's Included
What's Included? Baileigh CS-275EU 11" Manual Cold Saw
-
11" Cold Saw Blade — installed and ready for cutting pipe, tubing, and solid stock.
-
Flood Coolant System — lubricates the blade and clears chips during cutting operations.
-
Stop Rod — allows repeat cuts at the same length without re-measuring between pieces.
Specs
Baileigh CS-275EU 11" Manual Cold Saw Specifications
-
Model Number: CS-275EU
-
Stock Number: BA9-1002434
-
Motor: 1.5 HP
-
Power Requirement: 110V, single-phase
-
Blade Diameter: 11"
-
Blade Speed: 54 RPM
-
Round Tube Capacity at 90°: 3.25"
-
Miter Range: 45° left / 45° right
-
Vise Type: European-style with cam lock
-
Base Material: Cast iron
-
Net Weight: 378 lb.
-
Warranty: 1-year parts, lifetime technical support
-
Product Manual: CS-275EU Operator Manual
