Baileigh CS-250EU 10" Manual Cold Saw
Are you cutting pipe, tubing, and solid stock and need clean, burr-free results without heavy automation on standard 110V power?
What if a compact cold saw gave you 54 RPM blade speed, a European-style cam-lock vise, flood coolant, and a portable stand on a cast iron base?
Meet the Baileigh CS-250EU, a 10-inch manual cold saw built for fabrication shops, maintenance departments, and custom R&D operations that need accurate cuts without complex setup.
With the CS-250EU, you get a 1 HP motor on 110V single-phase power, 45-degree miter range left and right, a stop rod for repeat cuts, and a cast iron base that keeps the machine stable during cutting.
When the CS-250EU is set up for your material, you get clean, chatter-free cuts on pipe, tubing, and solids with a machine that moves where the work is.
Baileigh CS-250EU for Manual Cold Saw Cutting on Pipe and Tubing
54 RPM Blade Speed Delivers Clean, Burr-Free Cuts
The CS-250EU runs a 10-inch cold saw blade at 54 RPM, producing clean, chatter-free cuts on pipe, tubing, and solid stock without the heat and burrs that abrasive cutting leaves behind. This low blade speed is the defining characteristic of cold saw cutting and directly reduces the finishing work needed after each cut.
European-Style Vise with Cam Lock Speeds Material Loading
The European-style vise with cam-lock device secures material quickly and provides a clear line of sight to the cut zone. The 2.5-inch round tube capacity handles the pipe and tubing sizes that fabrication and maintenance shops cut regularly at both 90 and 45 degrees.
45-Degree Miter Range Covers Angled Cutting Work
The CS-250EU miters 45 degrees left and right for angled cuts without repositioning the material. A stop rod allows repeat cuts to be made at the same length without re-measuring between pieces, keeping output consistent on jobs where the same cut repeats across multiple parts.
Flood Coolant and Cast Iron Base Support Accurate Cutting
The integrated flood coolant system lubricates the blade and clears chips during cutting, protecting blade life and improving cut surface quality on longer runs. The rigid cast iron base minimizes vibration and holds the machine steady, and the stand removes for portable on-site use when needed.
What's Included
What's Included? Baileigh CS-250EU 10" Manual Cold Saw
-
10" Cold Saw Blade — installed and ready for cutting pipe, tubing, and solid stock.
-
Flood Coolant System — lubricates the blade and clears chips during cutting operations.
-
Removable Stand — supports the saw in the shop and removes for portable on-site use.
-
Stop Rod — allows repeat cuts at the same length without re-measuring between pieces.
Specs
Baileigh CS-250EU 10" Manual Cold Saw Specifications
-
Model Number: CS-250EU
-
Stock Number: BA9-1002426
-
Motor: 1 HP
-
Power Requirement: 110V, single-phase
-
Blade Diameter: 10" (250mm)
-
Blade Speed: 54 RPM
-
Round Tube Capacity: 2.5"
-
Miter Range: 45° left / 45° right
-
Vise Type: European-style with cam lock
-
Base Material: Cast iron
-
Net Weight: 345 lb.
-
Warranty: 1-year parts, lifetime technical support
