Baileigh BS-210M 6.69" Variable Speed Mitering Band Saw
Are you running a small to medium fabrication shop that needs precise angled cuts on steel, aluminum, and other metals on 110V single-phase power?
What if your band saw offered a swivel head that miters up to 60 degrees, gear-driven variable speed, and hydraulic descent in a compact footprint?
Meet the Baileigh BS-210M, a 6.69-inch variable speed mitering band saw built for small to medium fabrication shops and maintenance departments cutting metal stock daily.
With the BS-210M, you get a 1.5 HP gear-driven motor on 110V single-phase power, variable blade speed from 66 to 280 FPM, hydraulic descent, and carbide and roller blade guides.
When the BS-210M is set up for your material, you get clean, accurate miter cuts with a compact machine built for everyday shop use.
Baileigh BS-210M for Compact Variable Speed Mitering Cuts
Swivel Head Miters Up to 60 Degrees
The swivel head tilts up to 60 degrees for precise angled cuts without repositioning material on the table. This miter range covers the structural profiles, tubing, and angle iron that small to medium fabrication shops cut on a regular basis.
Gear-Driven Variable Speed Keeps Maintenance Low
The gear drive delivers consistent torque from 66 to 280 FPM without belts or pulleys that require regular replacement. This design keeps the saw running with less downtime on jobs where the machine handles a variety of material types throughout the day.
Hydraulic Descent Keeps Feed Pressure Consistent
The hydraulic descent system controls blade feed pressure from the start of the cut to the finish. Consistent descent rate keeps blade load even through the full cross section of the material, which directly affects cut surface quality and blade wear.
Carbide Guides and Flood Coolant Protect Blade Life
Carbide and roller blade guides support stable blade tracking across the full variable speed range. The integrated flood coolant system reduces heat at the blade and clears chips from the cut zone, extending blade service intervals on longer daily runs.
What's Included
What's Included? Baileigh BS-210M 6.69" Variable Speed Mitering Band Saw
-
3/4" Blade — installed and ready for cutting steel, aluminum, and other metals.
-
Flood Coolant System — reduces blade heat and clears chips during cutting operations.
Specs
Baileigh BS-210M 6.69" Variable Speed Mitering Band Saw Specifications
-
Model Number: BS-210M
-
Stock Number: BA9-1001309
-
Motor: 1.5 HP
-
Power Requirement: 110V, single-phase
-
Drive Type: Gear
-
Blade Width: 3/4"
-
Blade Speed: 66–280 FPM (variable)
-
Blade Guides: Carbide and roller
-
Round Capacity at 90°: 6.5"
-
Rectangular Capacity at 90°: 8.26" x 6.69"
-
Miter Range: 0°–60°
-
Miter Adjustment: Swivel head
-
Descent Control: Hydraulic
-
Return: Manual
-
Net Weight: 400 lb.
-
Warranty: 2 Years
-
Product Manual: BS-210M Operator Manual
