Baileigh BS-128M 5" × 6" Mitering Band Saw
Are you working in a small shop or on job sites that need a portable band saw with hydraulic descent and full mitering capability on 110V power?
What if that same saw switched between horizontal and vertical cutting with a swivel head that miters 60 degrees left and 45 degrees right?
Meet the Baileigh BS-128M, a 5-inch by 6-inch mitering band saw built for small fabrication shops, maintenance crews, and hobbyists who need professional cutting results in a portable package.
With the BS-128M, you get a 0.5 HP motor on 110V single-phase power, three selectable blade speeds, hydraulic descent, and carbide and roller blade guides on a wheeled steel stand.
When the BS-128M is set up for your job, you get clean, accurate cuts on round, rectangular, and shaped stock wherever the work takes you.
Baileigh BS-128M for Portable Mitering Metal Band Saw Cutting
Swivel Head Miters 60° Left and 45° Right
The swivel head tilts 60 degrees left and 45 degrees right for angled cuts in both directions without repositioning material. A 5-inch round capacity at 90 degrees and 6-inch rectangular capacity cover the pipe, bar, and shaped stock that small shops and maintenance crews cut regularly.
Hydraulic Descent Delivers Smooth Feed Control
The hydraulic descent system controls blade feed pressure through the cut for a consistent result from start to finish. Smooth, controlled descent reduces operator fatigue and produces cleaner cut surfaces on round and rectangular stock run after run.
Three Blade Speeds Match the Material
Three selectable blade speeds — approximately 78, 154, and 200 FPM — let operators set the right cutting rate for the material at hand. Adjustable carbide and roller blade guides move close to the material for stable tracking and improved cut accuracy.
Horizontal and Vertical Modes on a Wheeled Stand
The BS-128M switches between horizontal cutoff and vertical contour cutting modes, covering two types of work from one machine. The wheeled steel stand makes it easy to move the saw around a small shop or position it on a job site without lifting.
What's Included
What's Included? Baileigh BS-128M 5" × 6" Mitering Band Saw
-
1/2" Blade — installed and ready for cutting round, rectangular, and shaped metal stock.
-
Wheeled Steel Stand — supports the saw and allows easy repositioning in the shop or on site.
Specs
Baileigh BS-128M 5" × 6" Mitering Band Saw Specifications
-
Model Number: BS-128M
-
Stock Number: BA9-1001095
-
Motor: 0.75 HP
-
Power Requirement: 110V, single-phase
-
Blade Width: 1/2"
-
Blade Speeds: ~78, 154, 200 FPM (3 selectable speeds)
-
Blade Guides: Carbide and roller
-
Round Capacity at 90°: 5"
-
Rectangular Capacity at 90°: 6"
-
Miter Range: 60° left / 45° right
-
Miter Adjustment: Swivel head
-
Descent Control: Hydraulic
-
Return: Manual
-
Net Weight: 230 lb.
-
Warranty: 1 Year
