Baileigh BS-10VS 10" Variable Speed Dual Mitering Portable Band Saw
Are you running a fabrication shop that needs a portable band saw with dual mitering capability and electronic variable speed on standard single-phase power?
What if that same saw cut 10-inch round stock in both horizontal and vertical mode with hydraulic downfeed and a quick-locking vise?
Meet the Baileigh BS-10VS, a 10-inch variable speed dual mitering portable band saw built for professional shops and fabrication environments cutting a wide range of metals at precise angles.
With the BS-10VS, you get a 1 HP inverter-driven motor on 115V single-phase power, electronic variable speed from 88 to 270 FPM, hydraulic downfeed, and carbide and roller blade guides.
When the BS-10VS is set up for your job, you get accurate dual miter cuts in horizontal and vertical mode with a machine that fits where fixed saws cannot.
Baileigh BS-10VS for Portable Dual Mitering Metal Band Saw Cutting
Dual Miter Swivel Head Cuts 45° Left and Right
The swivel head tilts 45 degrees left and right for precise angled cuts in both directions without repositioning material on the table. A 10-inch round capacity at 90 degrees and 6.5-inch round capacity at 45 degrees cover a solid range of pipe, bar, and structural stock.
Electronic Variable Speed Adapts to the Material
The EVS system adjusts blade speed from 88 to 270 FPM on the fly to match the material and cross section being cut. Carbide and roller blade guides support stable blade tracking across the full speed range, keeping cut quality consistent from piece to piece.
Hydraulic Downfeed Delivers Smooth Descent Control
The hydraulic downfeed system controls blade descent through the cut for a smooth, consistent result from start to finish. This keeps feed pressure even across the full material cross section, which directly affects cut surface quality and blade wear over time.
Dual Cutting Orientation and Quick-Lock Vise Add Versatility
The BS-10VS operates in both horizontal and vertical cutting modes, covering cutoff and contour work from the same machine. The quick-locking vise secures material firmly for repeatable setups and fast changeover between pieces.
What's Included
What's Included? Baileigh BS-10VS 10" Variable Speed Dual Mitering Portable Band Saw
-
1" Blade — installed and ready for cutting metal stock in horizontal and vertical modes.
-
Quick-Locking Vise — secures material firmly for repeatable setups and fast changeover.
Specs
Baileigh BS-10VS 10" Variable Speed Dual Mitering Portable Band Saw Specifications
-
Model Number: BS-10VS
-
Stock Number: BA9-1232696
-
Motor: 1 HP (inverter-driven)
-
Motor Speed: 1,720 RPM
-
Power Requirement: 115V, single-phase
-
Blade Width: 1"
-
Blade Speed: 88–270 FPM (variable)
-
Blade Guides: Carbide and roller
-
Round Capacity at 90°: 10"
-
Round Capacity at 45°: 6.5"
-
Rectangular Capacity at 90°: 8" x 9"
-
Square Capacity at 90°: 8" x 8"
-
Miter Range: 45° left / 45° right
-
Miter Adjustment: Swivel head
-
Descent Control: Hydraulic
-
Return: Manual
-
Net Weight: 610 lb.
-
Warranty: 1 Year
