Baileigh AS-350M 14" Abrasive Cut Off Chop Saw
Are you losing time and money to slow, inconsistent cuts on pipe, bar stock, and structural shapes?
What if your shop had a cut-off saw that handled heavy daily production cutting with the same result every time?
Meet the Baileigh AS-350M, a 14-inch industrial abrasive chop saw built for fabricators and machine shops that cut ferrous materials day in and day out.
With the AS-350M, you get a 7.5 HP motor on 220V 3-phase power driving a 14-inch blade at up to 4,300 RPM, backed by a cast base and head mounted on a steel cabinet that holds the machine steady under continuous use.
When you run the AS-350M, you get clean, repeatable cuts on round stock, square tubing, pipe, angle iron, and bar stock with a machine built to keep pace with a production floor.
Baileigh AS-350M for Industrial Ferrous Metal Cutting
7.5 HP Motor Drives Consistent Cutting Performance
The AS-350M runs on a 7.5 HP motor operating on 220V 3-phase power. It drives the 14-inch abrasive blade at up to 4,300 RPM, giving the saw the power to move through pipe, bar stock, and structural shapes without bogging down under repeated cuts. This power level suits production environments where the saw runs for extended periods throughout the day.
Cast Base and Head Reduce Vibration Under Load
The saw head and base are cast construction mounted on a steel cabinet. This combination keeps the machine stable during cutting and reduces vibration that would otherwise shorten blade life and affect cut quality. Fabricators running this machine in busy shops benefit from a setup that holds steady even under heavy use.
Taper Lock Vise Speeds Material Changes
The heavy-duty vise features a taper lock system with a maximum opening of 6.5 inches. It holds material securely during the cut and releases quickly for changeover, keeping production moving without the delays of a conventional clamping setup. This matters most in shops where material variety and cut volume are both high.
45-Degree Miter Capacity Handles Angled Cuts
The saw head pivots 45 degrees left and right for miter cutting. At 90 degrees, the AS-350M cuts up to 4.5-inch round stock. At 45 degrees, round capacity is 4 inches. This range covers the structural shapes and profiles that fabrication and welding shops cut on a regular basis without switching to a separate machine.
What's Included
What's Included? Baileigh AS-350M 14" Abrasive Cut Off Chop Saw
-
14" Abrasive Cut-Off Blade — installed and ready for immediate use on ferrous materials.
-
Heavy-Duty Taper Lock Vise — secures material during cutting and releases quickly for fast material changes.
-
Steel Cabinet Base — supports the cast base and head to minimize vibration during cutting operations.
-
AS-350M Operator Manual — covers setup, operation, and maintenance procedures for the machine.
Specs
Baileigh AS-350M 14" Abrasive Cut Off Chop Saw Specifications
-
Model Number: AS-350M
-
Stock Number: BA9-1000267
-
Motor: 7.5 HP
-
Power Requirement: 220V, 3-phase
-
Blade Diameter: 14"
-
Blade Speed: 4,300 RPM
-
Round Capacity at 90°: 4.5"
-
Round Capacity at 45°: 4"
-
Miter Range: 45° left / 45° right
-
Maximum Vise Opening: 6.5"
-
Vise Type: Heavy-duty taper lock
-
Base Construction: Cast base and head on steel cabinet
-
Warranty: 1-year parts, lifetime technical support
