Axiom SureGrip Spoilboards for CNC Routers

Axiom SureGrip Spoilboards for CNC Routers

The Axiom SureGrip Spoilboards replace standard MDF spoilboards on Axiom CNC routers with EVA closed-cell foam. EVA material holds workpieces firmly with tape, screws, or reduced clamping pressure. The textured surface grips more reliably than MDF so your stock stays put during cuts. Each set mounts using your existing hardware and is available in sizes to match your machine's work area.

• Made from Ethylene-Vinyl Acetate (EVA) closed-cell foam
• Shore-C hardness of 80 durometer resists indentation under cutting pressure
• Lighter than MDF and easier to handle during installation and replacement
• Mounts using existing Axiom CNC router hardware — no additional fasteners needed
• Thicker than standard MDF spoilboards
• Perform a spoilboard surfacing operation before first use

Specs

Axiom SureGrip Spoilboards for CNC Routers Specifications

• Material: Ethylene-Vinyl Acetate (EVA) closed-cell foam
• Shore-C Hardness: 80 durometer
• Available Sizes: 2' x 2', 2' x 3', 2' x 4', 4' x 4'
• Compatibility: Axiom CNC routers — matching work area size
• Stock Numbers: AX9-ASB4EVA (2'x2'), AX9-ASB6EVA (2'x3'), AX9-ASB8EVA (2'x4'), AX9-ASB16EVA (4'x4')
• Model Numbers: ABSB4EVA (2'x2'), ASB6EVA (2'x3'), ASB8EVA (2'x4'), ASB16EVA (4'x4')
• Gross Weight: 7.0 lb (2'x2'), 10.5 lb (2'x3'), 13.5 lb (2'x4'), 13.5 lb (4'x4')
• Prop 65: Cancer and Reproductive Harm