Celebrating 50+ Years In Craftsmanship | Est. 1975
Celebrating 50+ Years In Craftsmanship | Est. 1975
Skip to content

Shop the Top Brands in Professional Craftsmanship

  • Save $ 2.75
    JET JET 4" Blastgate
    $ 14.84
    $ 12.09

    JET 4" Blastgate The JET 4" Blastgate gives you control over airflow between woodworking machines in a dust collection system. It fits JET dust co...

    View full details
  • Save $ 2.75
    JET JET 4" to 2-1/4" Reducer
    $ 14.84
    $ 12.09

    JET 4" to 2-1/4" Reducer The JET 4" to 2-1/4" Reducer steps a 4 inch dust port down to a 2-1/4 inch OD and 2 inch ID connection. It fits JET dust ...

    View full details
  • Hegner Scroll Saws Polymax Part Number 013 : HARMONICA SPRING P3
    $ 11.49

    For these Models: HARMONICA SPRING P3 Polymax Part Number 013 : HARMONICA SPRING P3 Multimax3/Multimax25 Part Number 013    Old SKUs: XM3-13 XP3-13

  • Hegner Scroll Saws Polymax Part Number 029 : SCREW, M8X10X16
    $ 11.49

    Polymax Part Number 029 :SCREW, M8X10X16

  • Save $ 5.50
    Wilton Wilton 251 1" Deep-Reach Carriage C-Clamp
    $ 16.49
    $ 10.99

    Wilton 251 1" Deep-Reach Carriage C-Clamp The Wilton 251 is a deep-reach carriage C-clamp with a 1-inch jaw opening and a 3-inch throat depth. It ...

    View full details
  • APOLLO 7500T/7700T PART # 14/15 Air Valve Stem
    Apollo Sprayers APOLLO 7500T/7700T PART # 14/15 Air Valve Stem
    $ 10.95

     Apollo 7500/7600 & 7700 series spray gun - Replacement air valve stem

  • Apollo Sprayers Apollo Gland Seal Adjustment Nut for 5000 series Turbine Gun
    $ 10.95

    Gland Seal Adjustment Nut for 5000 series Turbine Gun Part # 23

  • Apollo Sprayers APOLLO Replacement Pre-Filter A4096
    $ 10.95

    APOLLO Replacement Pre-Filters for All turbine models, including, but not limited to: 800, 825, 835, 900, 1000, 1000SE, 1025, 1035, 1050, 1040VR, 1...

    View full details
  • Apollo Sprayers Apollo Spray Gun Lube
    $ 10.95

    APOLLO Spray Gun Lube : REVOLUTIONARY LUBRICANT THAT CAN WORK WITH BOTH WATER AND SOLVENT FINISHES Apollo has developed a special spray gun lubrica...

    View full details
  • Hegner Scroll Saws Hegner Stand Foot Insert - 3 Pack
    $ 10.49

    Replacement Hegner Stand foot insert.Black plastic feet inserts that go on the bottom of the M2ST Hegner Stand.Sold as a pack of 3.

  • Hegner Scroll Saws Hegner Part Number 013/213 : HARMONICA SPRING
    $ 10.45

    For these models: M18-V/M18-S Part Number 013 : HARMONICA SPRING M18-V/M18-S Part Number 213 : HARMONICA SPRING M22-V PART NUMBER 013 : HARMONICA S...

    View full details
  • Hegner Scroll Saws M14-E/M2 PART NUMBER 015 : BOLTBLOCK
    $ 10.45

    M14-E/M2 PART NUMBER 015 :BOLT BLOCK

  • Air_Hose
    Hegner Scroll Saws Hegner Part Number AIR HOSE
    from $ 10.45

    Multimax3/Multimax25 Part Number 018 :AIR HOSE - AIR HOSE - 8mm plastic airline hose that connects from the upper arm to the bellows. 10mm hose con...

    View full details
  • Hegner Scroll Saws Polymax Part Number 030 : CONNECTOR AXLE
    $ 10.45

    Polymax Part Number 030 :CONNECTOR AXLE ONLY for the POLYMAX

  • Olson Olson PGT Precision Ground Tooth Skip Reverse Tooth Scroll Saw Blades
    from $ 10.03

    Olson PGT Ground Tooth Scroll Saw Blades : A unique tooth geometry and widely spaced gullets minimize burning and provide rapid chip removal. Blade...

    View full details
  • Olson Olson Double Tooth PGT Precision Ground Tooth Scroll Saw Blades
    from $ 10.03

    Olson PGT Double Ground Tooth Scroll Saw Blades : Same as PGT® Ground Tooth with unique double ground tooth geometry. Item Application TPI Width...

    View full details
  • APOLLO 7500T/7700T PART # :15/16 Air Valve Return Spring
    Apollo Sprayers APOLLO 7500T/7700T PART # :15/16 Air Valve Return Spring
    $ 9.95

    Apollo 7500/7600 & 7700 series spray gun - Replacement air valve return spring

  • Apollo Sprayers Apollo Replacement Needle Spring for 5000 series Turbine Gun
    $ 9.95

    Replacement Needle Spring for 5000 series

  • Save $ 4.40
    Wilton Wilton 142C 2" Carriage C-Clamp
    $ 14.29
    $ 9.89

    Wilton 142C 2" Carriage C-Clamp The Wilton 142C is a carriage C-clamp with a 2-inch jaw opening and a 1-1/8-inch throat depth. It features a clamp...

    View full details
  • APOLLO 7500T/7700T : MATERIAL ADJUSTMENT SCREW
    Apollo Sprayers APOLLO 7500T/7700T : MATERIAL ADJUSTMENT SCREW
    $ 8.95

    APOLLO 7500T/7700T PART # 19 / 20 :MATERIAL ADJUSTMENT SCREW

  • Save $ 1.98
    JET JET 4" Wire Clamp
    $ 10.77
    $ 8.79

    JET 4" Wire Clamp The JET 4" Wire Clamp secures dust collection hose to equipment ports. It installs with a crescent wrench and fits JET and Power...

    View full details
  • Save $ 1.98
    JET JET 4" Hose Clamp
    $ 10.77
    $ 8.79

    JET 4" Hose Clamp The JET 4" Hose Clamp secures dust collection hose to exhaust or intake ports and keeps air and dust from escaping the connectio...

    View full details
  • Hegner Scroll Saws M18-V/M18-S Part Number 265H : SWITCH DUST COVER FOR XM18-265S
    $ 8.35

    M18-V/M18-S Part Number 265H :CLEAR DUST COVER FOR XM18-265S SWITCH

  • Hegner Scroll Saws M18-V/M18-S Part Number 365 : Plastic dust cover for wide on/off switch (XM18-265SN)
    $ 8.35

    M18-V/M18-S Part Number 365 :   Plastic dust cover for wide on/off switch (XM18-265SN)