Celebrating 50+ Years In Craftsmanship | Est. 1975
Celebrating 50+ Years In Craftsmanship | Est. 1975
Skip to content

Tormek Accessories

Tormek accessories make sharpening easier, more repeatable, and less fussy. These are the tools that help you set the right angle, keep your stone wheel running true, improve control with your Tormek Sharpening Machine, and speed up your setup from one tool to the next.

Lowest Prices Guaranteed | Questions? Call Us: 1-800-727-6553

  • Tormek Sharpeners Tormek US-430 Extended Universal Support
    $ 133.00

    Tormek US-430 Extended Universal Support Are you working with long or tall tools that your standard support can’t reach or stabilize well enough? ...

    View full details
  • Tormek Sharpeners Tormek RB-180 Rotating Base
    $ 83.00

    Tormek RB-180 Rotating Base Are you constantly shifting your stance or lifting your sharpener just to switch between sharpening and honing? What i...

    View full details
  • Tormek Sharpeners Tormek KS-123 Knife Angle Setter
    $ 62.00

    Tormek KS-123 Knife Angle Setter Are your knives ending up with uneven bevels or dull edges because you are guessing the sharpening angle each ...

    View full details
  • Tormek Sharpeners Tormek MSK-250 Stainless Steel Shaft with EzyLock for T-8
    $ 80.00

    Tormek MSK-250 Stainless Steel Shaft with EzyLock Are you dealing with an older Tormek shaft that’s worn, rusting, or difficult to remove during w...

    View full details
  • Tormek Sharpeners Tormek PA-70 Honing Compound
    $ 20.00

    Tormek PA-70 Honing Compound If you want clean, polished edges off your Tormek leather honing wheel, this is the compound that makes it happen. P...

    View full details
  • TT-50 truing tool in action
    Tormek TT-50
    Tormek Sharpeners Tormek TT-50 Diamond Truing Tool
    $ 133.00

    Tormek TT-50 Diamond Truing Tool Are you finding your grindstone no longer cutting evenly or producing consistent results across your tools? What ...

    View full details
  • Tormek MH-380 Machine Cover
    Tormek Sharpeners Tormek MH-380 Machine Cover
    $ 39.00

    Tormek MH-380 Machine Cover Are you tired of dust and shavings settling on your sharpener between uses? What if you could keep your machine clean ...

    View full details
  • Tormek SP-650 Stone Grader
    SP-650 Tormek Stone Grader
    Tormek Sharpeners Tormek SP-650 Stone Grader
    $ 45.00

    Tormek SP-650 Stone Grader If you want more control over how your Tormek grindstone behaves, the SP-650 Stone Grader is the tool that makes it pos...

    View full details
  • Tormek Sharpeners Tormek MB-102 Multi Base
    $ 126.00

    Tormek MB-102 Multi Base Are you looking for a way to get a perfectly flat bevel on your Tormek system? What if you could sharpen on ...

    View full details
  • Tormek Sharpeners Tormek RM-533 Rubber Work Mat
    $ 85.00

    Tormek RM-533 Rubber Work Mat Does water or vibration make your sharpening setup feel messy or unstable? What if you had a sturdy, non-slip surfac...

    View full details
  • Tormek Sharpeners Tormek TTS-100 Turning Tool Setter
    $ 44.00

    Tormek TTS-100 Turning Tool Setter Are you struggling to get the same profile and bevel angle every time you sharpen your turning tools? What if y...

    View full details
  • Tormek Sharpeners Tormek XB-100 Horizontal Base
    $ 45.00

    Tormek XB-100 Horizontal Base Have an older Tormek machine and want the control and safety of sharpening edge trailing? The XB-100 Horizontal Base...

    View full details
  • Tormek Sharpeners Tormek ACC-150 Anti-Corrosion Concentrate
    $ 63.00

    Tormek ACC-150 Anti-Corrosion Concentrate Are you noticing rust forming in your water tray or on your diamond wheel after sharpening sessions? Wh...

    View full details
  • Tormek Sharpeners Tormek US-105 Universal Support with Micro Adjust for T-8
    $ 66.00

    Tormek US-105 Universal Support with Micro Adjust for T-8 Are you struggling to set consistent heights or angles because your support bar lacks fi...

    View full details
  • Tormek Sharpeners Tormek WM-200 Angle Master
    $ 41.00

    Tormek WM-200 AngleMaster Are you guessing at bevel angles or finding it difficult to repeat the same sharpening angle from one session to the nex...

    View full details
  • TF-2 Tilt Feet For smart water management
    Tormek TF-2 Tilt Feet
    Tormek Sharpeners Tormek TF-2 Tilt Feet
    $ 6.00

    TF 2 Tilt Feet   Sharpening gets cleaner, simpler, and more efficient with the TF-2 Tilt Feet. Designed specifically for the Tormek T-8, these sma...

    View full details
  • Tormek Sharpeners Tormek US-103 Universal Support with Micro Adjust for T-4
    $ 66.00

    Tormek US-103 Universal Support with Micro Adjust (T-4) Are you having trouble repeating the same sharpening angle on your Tormek T-4 because the ...

    View full details
  • Tormek Sharpeners Tormek MSK-200 Stainless Steel Shaft with EzyLock for T-4
    $ 72.00

    Tormek MSK-200 Stainless Steel Shaft with EzyLock Are you dealing with a worn or corroded main shaft that makes wheel changes slow or uncertain? W...

    View full details

Tormek Accessories

Tormek accessories are the small upgrades that make sharpening easier to set up, easier to repeat, and easier to live with at the bench. Use this page to find the tools that help you set angles, keep your stone wheel cutting right, improve support, and manage water and cleanup.



Angle Setting and Repeatability

If you want consistent results across different tools, start with your angle setters.



wm-200





Keep Your Grindstone True and Cutting Clean

These are the core accessories for Tormek stone wheels when you want clean, predictable grinding.



TT-50 truing tool in action





Support and Mounting Upgrades

Better support makes sharpening steadier, especially on longer tools and wider setups.



Tormek US-430 Extended Universal Support




Flat Bevel Work and Expanded Setup Options

These accessories help you change how the machine mounts and what edges you can finish.



mb-102



Comfort, Protection, and Water Management

Small upgrades that make your station cleaner, steadier, and easier to maintain.



Tormek MH-380 Machine Cover



Tormek Accessories FAQs

What’s the best first accessory if I want a smoother, faster sharpening setup?

If you want the biggest day-to-day improvement, start with the RB-180 Rotating Base. It lets you rotate the machine instead of lifting and repositioning it, which makes setup changes quicker when you switch tools.

What Tormek accessory helps most with long tools and steadier control?

Add the US-430 Extended Universal Support. The extra length supports longer and taller tools better, which helps you hold a consistent angle through the full pass.

What’s the easiest way to protect my Tormek between sharpening sessions?

Use the MH-380 Machine Cover. It keeps dust and shop grit off the machine so it stays cleaner and ready to use.

What Tormek accessory helps me get more consistent results without changing wheels or jigs?

Use a dedicated angle-setting tool. The WM-200 AngleMaster is a solid general option, and the KS-123 Knife Angle Setter is the quickest way to set repeatable angles on knives with less guesswork.

Shop All Tormek