{"product_id":"jet-ghb-1236-12-inch-x-36-inch-geared-head-bench-lathe-with-stand-and-foot-brake","title":"JET GHB-1236 12\" × 36\" Geared Head Bench Lathe with Stand \u0026 Foot Brake","description":"\u003ch2 style=\"text-align: center;\"\u003eJET GHB-1236 12\" × 36\" Geared Head Bench Lathe with Stand \u0026amp; Foot Brake\u003c\/h2\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you losing time and confidence on turning jobs that demand tight tolerances and consistent results?\u003c\/p\u003e\n\u003cp\u003eWhat if your lathe held position through every cut, threaded cleanly in both inch and metric, and stopped the moment you needed it to?\u003c\/p\u003e\n\u003cp\u003eMeet the JET GHB-1236 12\" × 36\" Geared Head Bench Lathe with Stand \u0026amp; Foot Brake, a bench lathe built for serious metalworking in the shop.\u003c\/p\u003e\n\u003cp\u003eWith the GHB-1236, you get an enclosed gearbox, induction hardened and ground bedways, hardened steel headstock gears, and a foot brake that is ready the moment you reach for it.\u003c\/p\u003e\n\u003cp\u003eWhen your lathe is set up right and holds steady through the work, you can focus on the cut instead of the machine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"youtube-player\" data-id=\"yveoHKW-moA\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET GHB-1236 for Precision Turning, Threading, and Taper Work\u003c\/h3\u003e\n\u003ch4 style=\"text-align: left;\"\u003eInduction Hardened Bedways Support Accurate, Repeatable Cuts\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe bedways on the GHB-1236 are induction hardened and ground to a flat, consistent surface. This keeps the carriage tracking true across the full 27-3\/8 inch travel. When your bed holds its geometry, your cuts stay where you put them from the first pass to the last.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eEnclosed Gearbox Delivers Threading Range Without Constant Gear Changes\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe enclosed gearbox gives you 36 inch thread pitches from 4 to 60 TPI and 32 metric thread pitches from 0.4 to 7mm. Feed rates cover 48 longitudinal and 36 cross feed settings. You can work through a wide range of jobs without stopping to swap gears, and the enclosed design keeps the gearbox running quietly and free of chips.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eHeadstock Gears and Spindle Bearings Maintain Smooth Power Transfer\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe headstock uses hardened steel gears paired with roller bearings at the spindle. This combination keeps the spindle running smoothly across all 9 speed settings from 75 to 1400 RPM. The 1.575 inch spindle bore and D1-4 mount give you room to handle a practical range of bar stock and workholding setups.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eFoot Brake and Emergency Stop Keep the Operator in Control\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe foot brake is built into the stand and within reach any time you are at the machine. The emergency stop is positioned close to the operator. Both controls are there so you can bring the spindle down fast when the job calls for it, without reaching across the work or breaking your stance.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eBacklash Adjustment and Offsettable Tailstock Support Accurate Setups\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe compound and cross slides have backlash adjustment so you can take up wear and keep your dial readings honest. The tailstock offsets for taper turning, and the MT-3 taper spindle travels 3-1\/2 inches. The steady rest with roller bearings supports longer workpieces and holds them stable through the cut.\u003c\/p\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_GHB-1236_12_x_36_Geared_Head_Bench_Lathe_with_Stand_Foot_Brake_10_480x480.jpg?v=1782054753\" alt='JET GHB-1236 12\" × 36\" Geared Head Bench Lathe with Stand \u0026amp; Foot Brake' style=\"float: none;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_GHB-1236_12_x_36_Geared_Head_Bench_Lathe_with_Stand_Foot_Brake_9_480x480.jpg?v=1782054753\" alt='JET GHB-1236 12\" × 36\" Geared Head Bench Lathe with Stand \u0026amp; Foot Brake' style=\"float: none;\"\u003e\n\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_GHB-1236_12_x_36_Geared_Head_Bench_Lathe_with_Stand_Foot_Brake_8_480x480.jpg?v=1782054753\" alt='JET GHB-1236 12\" × 36\" Geared Head Bench Lathe with Stand \u0026amp; Foot Brake' style=\"float: none;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_GHB-1236_12_x_36_Geared_Head_Bench_Lathe_with_Stand_Foot_Brake_7_480x480.jpg?v=1782054753\" alt='JET GHB-1236 12\" × 36\" Geared Head Bench Lathe with Stand \u0026amp; Foot Brake' style=\"float: none;\"\u003e\n\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? JET GHB-1236 12\" × 36\" Geared Head Bench Lathe with Stand \u0026amp; Foot Brake\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGHB-1236 Geared Head Bench Lathe\u003c\/strong\u003e — the main machine with enclosed gearbox, hardened bedways, and D1-4 spindle mount ready for turning, threading, and taper work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast Iron Stand with Foot Brake\u003c\/strong\u003e — positions the lathe at working height and puts the foot brake within reach without adding a separate pedal assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteady Rest with Roller Bearings\u003c\/strong\u003e — supports longer stock during turning with a capacity range of 0.31 to 2.95 inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant System\u003c\/strong\u003e — included and ready to use with the machine as configured on the stand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET GHB-1236 12\" × 36\" Geared Head Bench Lathe with Stand \u0026amp; Foot Brake Specifications\u003c\/h3\u003e\n\u003ch4\u003eMachine ID\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock Number:\u003c\/strong\u003e JT9-321236\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e GHB-1236\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2 HP, 230V, Single Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eBed and Swing\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing Over Bed:\u003c\/strong\u003e 12 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing Over Cross Slide:\u003c\/strong\u003e 7-1\/2 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing Through Gap:\u003c\/strong\u003e 18 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Gap:\u003c\/strong\u003e 8-3\/4 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth of Bed:\u003c\/strong\u003e 7.12 in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpindle\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Bore:\u003c\/strong\u003e 1.575 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Mount:\u003c\/strong\u003e D1-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper with Sleeve:\u003c\/strong\u003e MT-5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Spindle Speeds:\u003c\/strong\u003e 9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange of Spindle Speeds:\u003c\/strong\u003e 75–1400 RPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCarriage and Slides\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarriage Travel:\u003c\/strong\u003e 27-3\/8 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompound Slide Travel:\u003c\/strong\u003e 3 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Tool Size:\u003c\/strong\u003e 3\/4 × 3\/4 in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTailstock\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper in Tailstock Spindle:\u003c\/strong\u003e MT-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailstock Spindle Travel:\u003c\/strong\u003e 3-1\/2 in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThreading and Feed\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Inch Threads:\u003c\/strong\u003e 36\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange of Inch Threads:\u003c\/strong\u003e 4–60 TPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Metric Threads:\u003c\/strong\u003e 32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange of Metric Threads:\u003c\/strong\u003e 0.4–7mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Longitudinal and Cross Feed Rates:\u003c\/strong\u003e 48\/36\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange of Longitudinal Feeds:\u003c\/strong\u003e 0.0019–0.0472 IPR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange of Cross Feeds:\u003c\/strong\u003e 0.0014–0.0116 IPR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSteady Rest\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteady Rest Capacity:\u003c\/strong\u003e 0.31–2.95 in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDimensions and Weight\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (L × W × H):\u003c\/strong\u003e 66-1\/64 × 29-1\/2 × 59-13\/16 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 1,094 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight:\u003c\/strong\u003e 1,252 lb.\u003cbr\u003e\u003cbr\u003eWarning: Cancer and Reproductive Harm. For more information, go to \u003cb\u003e\u003cu\u003e\u003ca href=\"http:\/\/www.P65Warnings.ca.gov\/product\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\/product\u003c\/a\u003e\u003c\/u\u003e\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JET","offers":[{"title":"Base Lathe","offer_id":43680553369666,"sku":"JT9-321236","price":12429.0,"currency_code":"USD","in_stock":true},{"title":"ACU-RITE 203 DRO","offer_id":43680553402434,"sku":"JT9-323230","price":18259.0,"currency_code":"USD","in_stock":true},{"title":"Newall NMS800 DRO","offer_id":43680553435202,"sku":"JT9-323231","price":18259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETGHB-123612x36GearedHeadBenchLathewithStand_FootBrake_6.jpg?v=1782054590","url":"https:\/\/www.advmachinery.com\/products\/jet-ghb-1236-12-inch-x-36-inch-geared-head-bench-lathe-with-stand-and-foot-brake","provider":"Advanced Machinery","version":"1.0","type":"link"}