{"title":"Milling Machines","description":"","products":[{"product_id":"baileigh-vm-836e-1-8-x-36-step-pulley-vertical-milling-machine","title":"Baileigh VM-836E-1 8\" × 36\" Step Pulley Vertical Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eBaileigh VM-836E-1 8\" × 36\" Step Pulley Vertical Milling Machine\u003c\/h2\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you running a light to medium-duty fabrication shop or machine room that needs a compact vertical mill with a wide speed range on standard 120V power?\u003c\/p\u003e\n\u003cp\u003eWhat if that mill gave you 8 selectable spindle speeds from 80 to 2,720 RPM, a 90-degree tilting headstock, an integrated coolant system, and a 750 lb. table load capacity?\u003c\/p\u003e\n\u003cp\u003eMeet the Baileigh VM-836E-1, an 8-inch by 36-inch step pulley vertical milling machine built for light to medium-duty fabrication and machine shop environments that need industrial-grade milling in a compact footprint.\u003c\/p\u003e\n\u003cp\u003eWith the VM-836E-1, you get a 2 HP motor on 120V single-phase power, an R8 spindle taper, 8 step pulley speeds, and a built-in work light and coolant system that support precise machining work.\u003c\/p\u003e\n\u003cp\u003eWhen the VM-836E-1 is set up for your job, you get reliable milling, drilling, tapping, boring, and reaming capability from a machine built to hold up to daily shop use.\u003c\/p\u003e\n\n  \u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\n  \u003cbr\u003e\n  \u003cbr\u003e\n  \u003cdiv data-id=\"jsaGTwzz1h8\" class=\"youtube-player\"\u003e\u003c\/div\u003e\n\n  \u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBaileigh VM-836E-1 for Step Pulley Vertical Milling and Drilling Work\u003c\/h3\u003e\n\u003ch4\u003e8 Spindle Speeds Cover 80 to 2,720 RPM\u003c\/h4\u003e\n\u003cp\u003eThe step pulley drive delivers 8 selectable spindle speeds from 80 to 2,720 RPM, giving operators the range to match cutting conditions across milling, drilling, tapping, boring, and reaming operations on a variety of materials. This speed range suits both slower heavy cuts on steel and faster light passes on aluminum and softer stock.\u003c\/p\u003e\n\u003ch4\u003eR8 Spindle Accepts a Wide Range of Common Tooling\u003c\/h4\u003e\n\u003cp\u003eThe standard R8 spindle taper accepts a wide variety of common milling and drilling tooling without requiring specialty adapters. This makes the VM-836E-1 compatible with the tooling most fabrication shops and machine rooms already stock, keeping tooling costs low and setup straightforward.\u003c\/p\u003e\n\u003ch4\u003e90-Degree Tilting Headstock Handles Angled Machining Work\u003c\/h4\u003e\n\u003cp\u003eThe headstock tilts 90 degrees for angled milling and drilling work without repositioning the workpiece on the table. The 8-inch by 36-inch working table supports up to 750 lbs., giving the machine the capacity to hold larger and heavier workpieces during cutting operations.\u003c\/p\u003e\n\u003ch4\u003eIntegrated Coolant System and Work Light Support Precision Machining\u003c\/h4\u003e\n\u003cp\u003eThe built-in coolant system manages heat and chip control during cutting, protecting tool life and improving surface finish on longer machining runs. The integrated work light illuminates the cutting zone so operators can follow layout lines and monitor the cut without straining to see the work area.\u003c\/p\u003e\n\u003cdiv class=\"one-fourth-column\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-836E-18_x36_StepPulleyVerticalMillingMachine5_480x480.jpg?v=1777386397\" alt='Baileigh VM-836E-1 8\" × 36\" Step Pulley Vertical Milling Machine' style=\"margin-bottom: 0000px; float: none;\"\u003e\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003cdiv class=\"one-fourth-column\"\u003e\n\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-836E-18_x36_StepPulleyVerticalMillingMachine4_480x480.jpg?v=1777386397\" alt='Baileigh VM-836E-1 8\" × 36\" Step Pulley Vertical Milling Machine' style=\"margin-bottom: 00000px; float: none;\"\u003e\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003cdiv class=\"one-fourth-column\"\u003e\n\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-836E-18_x36_StepPulleyVerticalMillingMachine3_480x480.jpg?v=1777386397\" alt='Baileigh VM-836E-1 8\" × 36\" Step Pulley Vertical Milling Machine' style=\"margin-bottom: 0000px; float: none;\"\u003e\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003cdiv class=\"one-fourth-column-last\"\u003e\n\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-836E-18_x36_StepPulleyVerticalMillingMachine2_480x480.jpg?v=1777386397\" alt='Baileigh VM-836E-1 8\" × 36\" Step Pulley Vertical Milling Machine' style=\"margin-bottom: 00000px; float: none;\"\u003e\u003c\/div\u003e\n\n                                   \u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? Baileigh VM-836E-1 8\" × 36\" Step Pulley Vertical Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Coolant System\u003c\/strong\u003e — manages heat and chip control during cutting to protect tool life and improve surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork Light\u003c\/strong\u003e — illuminates the cutting zone for improved visibility during machining operations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBaileigh VM-836E-1 8\" × 36\" Step Pulley Vertical Milling Machine Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e VM-836E-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock Number:\u003c\/strong\u003e BA9-1020694\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Requirement:\u003c\/strong\u003e 120V, single-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e 8\" x 36\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Load Capacity:\u003c\/strong\u003e 750 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e R8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Spindle Speeds:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Speed Range:\u003c\/strong\u003e 80–2,720 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadstock Tilt:\u003c\/strong\u003e 90°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 1,750 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":43684341416002,"sku":"BA9-1020694","price":12979.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-836E-18_x36_StepPulleyVerticalMillingMachine1.jpg?v=1777386397"},{"product_id":"baileigh-vm-942e-1-9-x-42-step-pulley-vertical-milling-machine","title":"Baileigh VM-942E-1 9\" × 42\" Step Pulley Vertical Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eBaileigh VM-942E-1 9\" × 42\" Step Pulley Vertical Milling Machine\u003c\/h2\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\n\u003cp\u003eAre you running an industrial shop, tool room, or fabrication environment that needs a vertical knee mill with a 2-axis DRO and 8 selectable speeds on 220V single-phase power?\u003c\/p\u003e\n\u003cp\u003eWhat if that mill gave you 60 to 2,760 RPM across 8 speeds, an R8 spindle, dovetail slide ways with way covers, and an integrated coolant system on a 9-inch by 42-inch table?\u003c\/p\u003e\n\u003cp\u003eMeet the Baileigh VM-942E-1, a 9-inch by 42-inch step pulley vertical milling machine built for industrial shops, tool rooms, and serious fabrication environments that need reliable milling performance with precision positioning.\u003c\/p\u003e\n\u003cp\u003eWith the VM-942E-1, you get a 3 HP motor on 220V single-phase power, a 2-axis digital readout, an R8 spindle taper, and solid castings with dovetail slide ways built for long-term shop use.\u003c\/p\u003e\n\u003cp\u003eWhen the VM-942E-1 is set up for your job, you get accurate, repeatable milling results with a machine built to hold up to demanding daily shop use.\u003c\/p\u003e\n\n  \u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/Baileigh_VM-942E-1_9_x_42_Step_Pulley_Vertical_Milling_Machine_25a7ff75-275b-4036-90ca-d80493c75fd8_480x480.jpg?v=1777967710\" alt='Baileigh VM-942E-1 9\" × 42\" Step Pulley Vertical Milling Machine' style=\"margin-bottom: 0000px; float: none;\"\u003e\u003c\/div\u003e\n\n  \n\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBaileigh VM-942E-1 for Industrial Step Pulley Vertical Knee Mill Work\u003c\/h3\u003e\n\u003ch4\u003e8 Spindle Speeds Cover 60 to 2,760 RPM\u003c\/h4\u003e\n\u003cp\u003eThe step pulley drive delivers 8 selectable spindle speeds from 60 to 2,760 RPM, giving operators the range to match cutting conditions across milling, drilling, tapping, boring, and reaming on a variety of materials. This speed range suits slow heavy cuts on steel and faster passes on aluminum and softer stock without a variable frequency drive.\u003c\/p\u003e\n\u003ch4\u003e2-Axis DRO Improves Positioning Accuracy and Setup Speed\u003c\/h4\u003e\n\u003cp\u003eThe 2-axis digital readout provides accurate X\/Y positioning feedback and reduces setup errors on close-tolerance work. Precise positioning reduces the time spent measuring and adjusting between operations, keeping the machine productive through jobs that require multiple setups.\u003c\/p\u003e\n\u003ch4\u003eR8 Spindle and Dovetail Ways Support Reliable Daily Milling\u003c\/h4\u003e\n\u003cp\u003eThe R8 spindle taper accepts widely available common tooling without specialty adapters, keeping tooling costs low and setup straightforward. Dovetail slide ways with way covers provide durable slide guidance and protect the ways from chips and coolant during extended machining sessions.\u003c\/p\u003e\n\u003ch4\u003eCoolant System and Halogen Work Light Support Extended Use\u003c\/h4\u003e\n\u003cp\u003eThe integrated coolant system manages heat and chip control during cutting, protecting tool life and improving surface finish on longer machining runs. The halogen work light illuminates the cutting zone so operators can monitor the cut and follow layout lines clearly during extended machining sessions.\u003c\/p\u003e\n\u003cdiv class=\"one-fourth-column\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"margin-bottom: 0000000px; float: none;\" alt='Baileigh VM-942E-1 9\" × 42\" Step Pulley Vertical Milling Machine' src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-942E-19_x42_StepPulleyVerticalMillingMachine12_480x480.jpg?v=1777401679\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-fourth-column\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"margin-bottom: 0000px; float: none;\" alt='Baileigh VM-942E-1 9\" × 42\" Step Pulley Vertical Milling Machine' src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-942E-19_x42_StepPulleyVerticalMillingMachine4_480x480.jpg?v=1777401679\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-fourth-column\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"margin-bottom: 0000px; float: none;\" alt='Baileigh VM-942E-1 9\" × 42\" Step Pulley Vertical Milling Machine' src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-942E-19_x42_StepPulleyVerticalMillingMachine7_480x480.jpg?v=1777401679\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-fourth-column-last\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"margin-bottom: 0000px; float: none;\" alt='Baileigh VM-942E-1 9\" × 42\" Step Pulley Vertical Milling Machine' src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-942E-19_x42_StepPulleyVerticalMillingMachine3_480x480.jpg?v=1777401679\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? Baileigh VM-942E-1 9\" × 42\" Step Pulley Vertical Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Axis Digital Readout (DRO)\u003c\/strong\u003e — provides accurate X\/Y positioning feedback for precise and repeatable machining setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Coolant System\u003c\/strong\u003e — manages heat and chip control during cutting to protect tool life and improve surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalogen Work Light\u003c\/strong\u003e — illuminates the cutting zone for improved visibility during machining operations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBaileigh VM-942E-1 9\" × 42\" Step Pulley Vertical Milling Machine Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e VM-942E-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock Number:\u003c\/strong\u003e BA9-1020695\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Requirement:\u003c\/strong\u003e 220V, single-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e 9\" x 42\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Load Capacity:\u003c\/strong\u003e 770 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e R8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Spindle Speeds:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Speed Range:\u003c\/strong\u003e 60–2,760 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Readout:\u003c\/strong\u003e 2-axis DRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlide Ways:\u003c\/strong\u003e Dovetail with way covers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 2,250 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Manual:\u003c\/strong\u003e \u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/71d40491f3368001\/original\/VM-942E-1-1-of-2-Manual.pdf\"\u003eVM-942E-1 Operator Manual (Part 1 of 2)\u003c\/a\u003e | \u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/5d2af2fefa3126cf\/original\/VM-942E-1-2-of-2-Manual.pdf\"\u003eVM-942E-1 Operator Manual (Part 2 of 2)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":43684429922370,"sku":"BA9-1020695","price":14959.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-942E-19_x42_StepPulleyVerticalMillingMachine1.jpg?v=1777401679"},{"product_id":"baileigh-vm-942-1-9-x-42-variable-speed-vertical-milling-machine","title":"Baileigh VM-942-1 9\" × 42\" Variable Speed Vertical Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eBaileigh VM-942-1 9\" × 42\" Variable Speed Vertical Milling Machine\u003c\/h2\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you running a fabrication shop or industrial machine environment that needs a variable speed vertical mill with powered X, Y, and Z axes and a 3-axis DRO on 220V single-phase power?\u003c\/p\u003e\n\u003cp\u003eWhat if that mill gave you infinitely adjustable speed from 80 to 2,700 RPM, an NT40 spindle taper, powered axis feeds, and an integrated coolant system on a 9-inch by 42-inch precision table?\u003c\/p\u003e\n\u003cp\u003eMeet the Baileigh VM-942-1, a 9-inch by 42-inch variable speed vertical milling machine built for professional fabrication shops and industrial machine environments that need precise, controlled milling performance every day.\u003c\/p\u003e\n\u003cp\u003eWith the VM-942-1, you get a 3 HP motor on 220V single-phase power, a 3-axis digital readout, square dovetail slide ways with way covers, and powered X, Y, and Z axis feeds that reduce operator fatigue on longer jobs.\u003c\/p\u003e\n\u003cp\u003eWhen the VM-942-1 is set up for your job, you get accurate, repeatable milling results with a machine built for demanding daily industrial shop use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cdiv data-id=\"Y7grdTuUL74\" class=\"youtube-player\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBaileigh VM-942-1 for Variable Speed Industrial Vertical Milling Work\u003c\/h3\u003e\n\u003ch4\u003eInfinitely Variable Speed from 80 to 2,700 RPM\u003c\/h4\u003e\n\u003cp\u003eThe VM-942-1 adjusts spindle speed infinitely from 80 to 2,700 RPM, letting operators dial in the exact cutting rate for the material and operation at hand. This continuous variable control suits both slow heavy cuts on steel and faster finishing passes on aluminum and softer stock without stepping through fixed pulley positions.\u003c\/p\u003e\n\u003ch4\u003ePowered X, Y, and Z Axis Feeds Improve Control and Reduce Fatigue\u003c\/h4\u003e\n\u003cp\u003ePowered movement on the X, Y, and Z axes delivers smooth, controlled feed rates during milling operations, reducing the manual effort and fatigue that comes with hand-feeding on longer jobs. This powered feed system also improves surface finish consistency on facing and profile work where steady feed rate directly affects the result.\u003c\/p\u003e\n\u003ch4\u003e3-Axis DRO and NT40 Spindle Support Precision Setup\u003c\/h4\u003e\n\u003cp\u003eThe 3-axis digital readout provides accurate X, Y, and Z positioning feedback, reducing setup errors and speeding up machining on close-tolerance work. The NT40 spindle taper offers broad tooling compatibility for fabrication shops that run a variety of milling and drilling operations from the same machine.\u003c\/p\u003e\n\u003ch4\u003eSquare Dovetail Ways and Integrated Coolant Support Daily Use\u003c\/h4\u003e\n\u003cp\u003eSquare dovetail slide ways with way covers provide durable, accurate slide guidance and protect the ways from chips and coolant during extended machining sessions. The integrated coolant system with catch tray manages heat and chip control during cutting, protecting tool life and keeping the work area clean through long production runs.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/Baileigh_VM-942-1_9_x_42_Variable_Speed_Vertical_Milling_Machine_480x480.jpg?v=1778093972\" alt='Baileigh VM-942-1 9\" × 42\" Variable Speed Vertical Milling Machine' style=\"margin-bottom: 00000px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? Baileigh VM-942-1 9\" × 42\" Variable Speed Vertical Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Axis Digital Readout (DRO)\u003c\/strong\u003e — provides accurate X, Y, and Z positioning for precise and repeatable machining setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Coolant System with Catch Tray\u003c\/strong\u003e — manages heat and chip control during cutting to protect tool life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Work Light\u003c\/strong\u003e — illuminates the cutting zone for improved visibility during machining operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWay Covers\u003c\/strong\u003e — protect dovetail slide ways from chips and coolant during extended use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBaileigh VM-942-1 9\" × 42\" Variable Speed Vertical Milling Machine Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e VM-942-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock Number:\u003c\/strong\u003e BA9-1008192\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Requirement:\u003c\/strong\u003e 220V, single-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e 9\" x 42\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Load Capacity:\u003c\/strong\u003e 770 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e NT40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Speed Range:\u003c\/strong\u003e 80–2,700 RPM (variable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxis Feeds:\u003c\/strong\u003e Powered X, Y, and Z\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Readout:\u003c\/strong\u003e 3-axis DRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlide Ways:\u003c\/strong\u003e Square dovetail with way covers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 2,200 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Manual:\u003c\/strong\u003e VM-942-1 Operator Manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":43685208064066,"sku":"BA9-1008192","price":24639.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-942-19x42VariableSpeedVerticalMillingMachine.jpg?v=1777402927"},{"product_id":"baileigh-vm-949e-vs-9-x-49-variable-speed-vertical-milling-machine","title":"Baileigh VM-949E-VS 9\" × 49\" Variable Speed Vertical Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eBaileigh VM-949E-VS 9\" × 49\" Variable Speed Vertical Milling Machine\u003c\/h2\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\n\u003cp\u003eAre you running a machine shop or fabrication environment that needs infinitely variable spindle speed and a longer table for larger workpiece setups on 220V single-phase power?\u003c\/p\u003e\n\u003cp\u003eWhat if that mill gave you 60 to 4,200 RPM, an R8 spindle with power drawbar, X-axis power feed with rapid traverse, and a DRO on Meehanite castings with a 9-inch by 49-inch table?\u003c\/p\u003e\n\u003cp\u003eMeet the Baileigh VM-949E-VS, a 9-inch by 49-inch variable speed vertical milling machine built for machine shops and fabrication environments that need flexible spindle control and a longer table for demanding daily milling work.\u003c\/p\u003e\n\u003cp\u003eWith the VM-949E-VS, you get a 3 HP continuous-duty motor on 220V single-phase power, rigid Meehanite castings, dovetail ways with adjustable gibs, Taiwan lead screws, and a full set of standard features that support extended daily machining.\u003c\/p\u003e\n\u003cp\u003eWhen the VM-949E-VS is set up for your job, you get accurate, repeatable milling results on a wider range of workpiece sizes with a machine built for dependable industrial shop use.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\n\n  \u003cbr\u003e\n  \u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/Baileigh_VM-949E-VS_9_x_49_Variable_Speed_Vertical_Milling_Machine_480x480.jpg?v=1779201683\" alt='Baileigh VM-949E-VS 9\" × 49\" Variable Speed Vertical Milling Machine' style=\"margin-bottom: 00000px; float: none;\"\u003e\u003c\/div\u003e\n\n  \u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBaileigh VM-949E-VS for Variable Speed Vertical Milling on Larger Stock\u003c\/h3\u003e\n\u003ch4\u003eInfinitely Variable Speed from 60 to 4,200 RPM\u003c\/h4\u003e\n\u003cp\u003eThe VM-949E-VS adjusts spindle speed infinitely from 60 to 4,200 RPM, letting operators dial in the exact cutting rate for the material and tooling at hand. This wide variable range covers slow heavy cuts on steel through high-speed passes on aluminum and non-ferrous materials without stepping through fixed pulley positions.\u003c\/p\u003e\n\u003ch4\u003e9\" × 49\" Table and Meehanite Castings Handle Larger Setups\u003c\/h4\u003e\n\u003cp\u003eThe 9-inch by 49-inch precision table supports workpieces up to 750 lbs. and accommodates longer stock and larger fixtures than shorter table mills. Rigid Meehanite castings keep the machine stable under load, and dovetail ways with adjustable gibs and Taiwan lead screws maintain accuracy and repeatability through extended daily use.\u003c\/p\u003e\n\u003ch4\u003eX-Axis Power Feed and R8 Spindle Improve Workflow\u003c\/h4\u003e\n\u003cp\u003eThe X-axis power feed with rapid traverse reduces operator effort on facing and profile work where consistent feed rate directly affects surface finish quality. The R8 spindle with power drawbar accepts common tooling and simplifies tool changes, keeping the machine productive through jobs that require multiple tooling configurations.\u003c\/p\u003e\n\u003ch4\u003eDRO, Coolant System, and One-Shot Lubricator Support Daily Use\u003c\/h4\u003e\n\u003cp\u003eThe X\/Y-axis DRO provides accurate positioning feedback and reduces setup errors on close-tolerance work. The integrated coolant system with splash guard and plumbed return line manages heat and chip control during cutting, while the one-shot lubricator simplifies way lubrication to keep slide movement smooth and accurate through long production days.\u003c\/p\u003e\n\u003cdiv class=\"one-fourth-column\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-949E-VS9_x49_VariableSpeedVerticalMillingMachine5_480x480.jpg?v=1777405452\" alt='Baileigh VM-949E-VS 9\" × 49\" Variable Speed Vertical Milling Machine' style=\"margin-bottom: 00000px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-fourth-column\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-949E-VS9_x49_VariableSpeedVerticalMillingMachine3_480x480.jpg?v=1777405454\" alt='Baileigh VM-949E-VS 9\" × 49\" Variable Speed Vertical Milling Machine' style=\"margin-bottom: 0000px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-fourth-column\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-949E-VS9_x49_VariableSpeedVerticalMillingMachine9_480x480.jpg?v=1777405451\" alt='Baileigh VM-949E-VS 9\" × 49\" Variable Speed Vertical Milling Machine' style=\"margin-bottom: 0000px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-fourth-column-last\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-949E-VS9_x49_VariableSpeedVerticalMillingMachine7_480x480.jpg?v=1777405451\" alt='Baileigh VM-949E-VS 9\" × 49\" Variable Speed Vertical Milling Machine' style=\"margin-bottom: 0000px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? Baileigh VM-949E-VS 9\" × 49\" Variable Speed Vertical Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eX\/Y-Axis DRO\u003c\/strong\u003e — provides accurate positioning feedback for precise and repeatable machining setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eX-Axis Power Feed with Rapid Traverse\u003c\/strong\u003e — reduces operator effort on facing and profile milling work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Coolant System with Splash Guard\u003c\/strong\u003e — manages heat and chip control to protect tool life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-Shot Lubricator\u003c\/strong\u003e — simplifies way lubrication to keep slide movement smooth and accurate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Brake\u003c\/strong\u003e — stops spindle rotation quickly for safe tool changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Work Light\u003c\/strong\u003e — illuminates the cutting zone for improved visibility during machining.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBaileigh VM-949E-VS 9\" × 49\" Variable Speed Vertical Milling Machine Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e VM-949E-VS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock Number:\u003c\/strong\u003e BA9-1019108\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3 HP (continuous-duty)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Requirement:\u003c\/strong\u003e 220V, single-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e 9\" x 49\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Load Capacity:\u003c\/strong\u003e 750 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e R8 with power drawbar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Speed Range:\u003c\/strong\u003e 60–4,200 RPM (infinitely variable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Readout:\u003c\/strong\u003e X\/Y-axis DRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxis Feeds:\u003c\/strong\u003e X-axis power feed with rapid traverse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlide Ways:\u003c\/strong\u003e Dovetail with adjustable gibs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Screws:\u003c\/strong\u003e Taiwan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCastings:\u003c\/strong\u003e Meehanite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 2,350 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Manual:\u003c\/strong\u003e \u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/6731c610087fd4f9\/original\/VM-949E-VS-1-of-2-Manual.pdf\"\u003eVM-949E-VS Operator Manual (Part 1 of 2) \u003c\/a\u003e| \u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/6176128597fbeb5b\/original\/VM-949E-VS-2-of-2-Manual.pdf\"\u003eVM-949E-VS Operator Manual (Part 2 of 2)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":43685219139650,"sku":"BA9-1019108","price":17269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-949E-VS9_x49_VariableSpeedVerticalMillingMachine1.jpg?v=1777405451"},{"product_id":"baileigh-vm-1054e-vs-10-x-54-variable-speed-vertical-milling-machine","title":"Baileigh VM-1054E-VS 10\" × 54\" Variable Speed Vertical Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eBaileigh VM-1054E-VS 10\" × 54\" Variable Speed Vertical Milling Machine\u003c\/h2\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\n\u003cp\u003eAre you running an industrial shop, tool room, or fabrication environment that needs a large-table vertical mill with powered X, Y, and Z axes and variable speed on 220V 3-phase power?\u003c\/p\u003e\n\u003cp\u003eWhat if that mill gave you 60 to 4,200 RPM, an NT40 spindle with air drawbar, full X\/Y\/Z powerfeeds, a DRO, and an integrated coolant system on a 10-inch by 54-inch precision-ground table?\u003c\/p\u003e\n\u003cp\u003eMeet the Baileigh VM-1054E-VS, a 10-inch by 54-inch variable speed vertical milling machine built for industrial shops, tool rooms, and fabrication environments that need precise milling control on large workpieces.\u003c\/p\u003e\n\u003cp\u003eWith the VM-1054E-VS, you get a 3 HP inverter-driven motor on 220V 3-phase power, rigid cast iron construction, full three-axis powerfeeds, and a DRO that supports accurate, repeatable setups on demanding machining work.\u003c\/p\u003e\n\u003cp\u003eWhen the VM-1054E-VS is set up for your job, you get clean, accurate milling results on large stock with a machine built for dependable daily industrial use.\u003c\/p\u003e\n\n  \u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/Baileigh_VM-1054E-VS_10_x_54_Variable_Speed_Vertical_Milling_Machine_480x480.jpg?v=1779202480\" alt='Baileigh VM-1054E-VS 10\" × 54\" Variable Speed Vertical Milling Machine' style=\"margin-bottom: 0000000px; float: none;\"\u003e\u003c\/div\u003e\n\n  \u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBaileigh VM-1054E-VS for Variable Speed Industrial Vertical Milling on Large Stock\u003c\/h3\u003e\n\u003ch4\u003eInfinitely Variable Speed from 60 to 4,200 RPM\u003c\/h4\u003e\n\u003cp\u003eThe inverter-driven motor adjusts spindle speed infinitely from 60 to 4,200 RPM, letting operators dial in the exact cutting rate for the material and tooling at hand. This wide variable range covers slow heavy cuts on steel through high-speed passes on aluminum and non-ferrous materials without stepping through fixed pulley positions.\u003c\/p\u003e\n\u003ch4\u003ePowered X, Y, and Z Axes Improve Control and Reduce Fatigue\u003c\/h4\u003e\n\u003cp\u003eFull powerfeeds on all three axes deliver smooth, controlled feed rates during milling operations, reducing the manual effort and fatigue that comes with hand-feeding on longer jobs. Powered Z-axis feed adds practical convenience on drilling and boring operations where consistent depth control matters.\u003c\/p\u003e\n\u003ch4\u003e10\" × 54\" Precision Table and NT40 Spindle Handle Large Setups\u003c\/h4\u003e\n\u003cp\u003eThe 10-inch by 54-inch precision-ground table accommodates larger workpieces and fixtures that shorter table mills cannot support. The NT40 spindle taper with air drawbar offers broad tooling compatibility and simplifies tool changes, keeping the machine productive through jobs that require multiple tooling configurations.\u003c\/p\u003e\n\u003ch4\u003eDRO, Cast Iron Frame, and Coolant System Support Daily Production\u003c\/h4\u003e\n\u003cp\u003eThe digital readout provides accurate positioning feedback and reduces setup errors on close-tolerance work. Rigid cast iron construction minimizes vibration that affects surface finish and dimensional accuracy, while the integrated coolant system manages heat and chip control during cutting to protect tool life through long production runs.\u003c\/p\u003e\n\u003cdiv class=\"one-fourth-column\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-1054E-VS10_x54_VariableSpeedVerticalMillingMachine8_480x480.jpg?v=1777464921\" alt='Baileigh VM-1054E-VS 10\" × 54\" Variable Speed Vertical Milling Machine' style=\"margin-bottom: 00000px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-fourth-column\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-1054E-VS10_x54_VariableSpeedVerticalMillingMachine4_480x480.jpg?v=1777464921\" alt='Baileigh VM-1054E-VS 10\" × 54\" Variable Speed Vertical Milling Machine' style=\"margin-bottom: 00000px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-fourth-column\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-1054E-VS10_x54_VariableSpeedVerticalMillingMachine3_480x480.jpg?v=1777464921\" alt='Baileigh VM-1054E-VS 10\" × 54\" Variable Speed Vertical Milling Machine' style=\"margin-bottom: 00000px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-fourth-column-last\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-1054E-VS10_x54_VariableSpeedVerticalMillingMachine2_480x480.jpg?v=1777464921\" alt='Baileigh VM-1054E-VS 10\" × 54\" Variable Speed Vertical Milling Machine' style=\"margin-bottom: 000000px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? Baileigh VM-1054E-VS 10\" × 54\" Variable Speed Vertical Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Readout (DRO)\u003c\/strong\u003e — provides accurate positioning feedback for precise and repeatable machining setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir Drawbar\u003c\/strong\u003e — simplifies tool changes on the NT40 spindle for faster tooling changeover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Coolant System\u003c\/strong\u003e — manages heat and chip control during cutting to protect tool life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBaileigh VM-1054E-VS 10\" × 54\" Variable Speed Vertical Milling Machine Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e VM-1054E-VS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock Number:\u003c\/strong\u003e BA9-1020696\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3 HP (inverter-driven)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Requirement:\u003c\/strong\u003e 220V, 3-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e 10\" x 54\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Load Capacity:\u003c\/strong\u003e 500 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e NT40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Speed Range:\u003c\/strong\u003e 60–4,200 RPM (infinitely variable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxis Feeds:\u003c\/strong\u003e Powered X, Y, and Z\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Readout:\u003c\/strong\u003e DRO (X\/Y axes)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Rigid cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 2,930 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Manual:\u003c\/strong\u003e \u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/16d33512b9ca2ed0\/original\/VM_1054E_VS_1of2_05_2018_pdf.pdf\"\u003eVM-1054E-VS Operator Manual (Part 1 of 2)\u003c\/a\u003e | \u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/198b4d3896d21669\/original\/VM_1054E_VS_2of2_05_2018_pdf.pdf\"\u003eVM-1054E-VS Operator Manual (Part 2 of 2)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":43690369646658,"sku":"BA9-1020696","price":22219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-1054E-VS10_x54_VariableSpeedVerticalMillingMachine1.jpg?v=1777464921"},{"product_id":"baileigh-vm-949-9-x-49-evs-vertical-milling-machine","title":"Baileigh VM-949 9\" × 49\" EVS Vertical Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eBaileigh VM-949 9\" × 49\" EVS Vertical Milling Machine\u003c\/h2\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you running a small to medium industrial machine shop that needs a heavy-duty vertical knee mill with Yaskawa inverter-driven variable speed and a Mitutoyo DRO on either single-phase or 3-phase power?\u003c\/p\u003e\n\u003cp\u003eWhat if that mill gave you 60 to 4,200 RPM, powered X\/Y\/Z axes, an air drawbar, and a Mitutoyo X\/Y-axis DRO in your choice of 220V single-phase or 220V 3-phase power to match your shop?\u003c\/p\u003e\n\u003cp\u003eMeet the Baileigh VM-949, a 9-inch by 49-inch EVS vertical milling machine available in 220V single-phase and 220V 3-phase configurations, built for industrial machine shops and fabrication environments that need precise, flexible milling performance.\u003c\/p\u003e\n\u003cp\u003eWith the VM-949, you get a 3 HP Yaskawa inverter-driven motor, an NT40 spindle with air drawbar, robust castings for vibration-free milling, and a full set of standard features that support demanding daily machining work.\u003c\/p\u003e\n\u003cp\u003eWhen the VM-949 is set up for your job, you get accurate, repeatable milling results on large stock with a machine that matches your shop power and performs at an industrial level.\u003c\/p\u003e\n\n  \u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\n  \u003cbr\u003e\n  \u003cbr\u003e\n  \u003cbr\u003e\n  \n\u003cdiv data-id=\"n-2Hy2eaddE\" class=\"youtube-player\"\u003e\u003c\/div\u003e\n\n  \u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBaileigh VM-949 for Industrial EVS Vertical Knee Milling Work\u003c\/h3\u003e\n\u003ch4\u003eYaskawa Inverter-Driven Variable Speed from 60 to 4,200 RPM\u003c\/h4\u003e\n\u003cp\u003eThe Yaskawa inverter drive adjusts spindle speed infinitely from 60 to 4,200 RPM, delivering flexible cutting speed control across a wide range of materials and tooling. This inverter-driven system provides consistent torque and smooth speed transitions that protect tooling and improve surface finish quality on demanding milling work.\u003c\/p\u003e\n\u003ch4\u003eMitutoyo DRO and Powered X\/Y\/Z Axes Support Precise Machining\u003c\/h4\u003e\n\u003cp\u003eThe Mitutoyo X\/Y-axis DRO provides accurate positioning down to tenths of thousandths, reducing setup errors on close-tolerance work. Powered X, Y, and Z axes deliver smooth, controlled feed rates across all three axes, improving productivity and reducing operator fatigue on longer milling and drilling operations.\u003c\/p\u003e\n\u003ch4\u003e9\" × 49\" Table and NT40 Spindle Handle a Wide Range of Setups\u003c\/h4\u003e\n\u003cp\u003eThe 9-inch by 49-inch precision-ground table supports workpieces up to 750 lbs. and handles a wide range of workpiece sizes and fixture setups. The NT40 spindle taper with air drawbar provides broad tooling compatibility and fast tool changes, keeping the machine productive through jobs that require multiple tooling configurations.\u003c\/p\u003e\n\u003ch4\u003eTwo Power Configurations Match Your Shop Requirements\u003c\/h4\u003e\n\u003cp\u003eThe VM-949 is available in 220V single-phase for shops without 3-phase service and 220V 3-phase for industrial environments with 3-phase power. Both configurations share the same 3 HP Yaskawa inverter drive, Mitutoyo DRO, NT40 spindle, powered axes, and integrated coolant system with catch tray.\u003c\/p\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? Baileigh VM-949 9\" × 49\" EVS Vertical Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMitutoyo X\/Y-Axis DRO\u003c\/strong\u003e — provides accurate positioning down to tenths of thousandths for repeatable machining setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir Drawbar\u003c\/strong\u003e — simplifies tool changes on the NT40 spindle for faster tooling changeover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Coolant System with Catch Tray\u003c\/strong\u003e — manages heat and chip control during cutting to protect tool life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBaileigh VM-949 9\" × 49\" EVS Vertical Milling Machine Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Power Configurations:\u003c\/strong\u003e 220V Single-Phase (VM-949-1) | 220V 3-Phase (VM-949-3)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock Number (Single-Phase):\u003c\/strong\u003e BA9-1008232\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock Number (3-Phase):\u003c\/strong\u003e BA9-1008236\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number (Single-Phase):\u003c\/strong\u003e VM-949-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number (3-Phase):\u003c\/strong\u003e VM-949-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3 HP (Yaskawa inverter-driven)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Requirement (Single-Phase):\u003c\/strong\u003e 220V, single-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Requirement (3-Phase):\u003c\/strong\u003e 220V, 3-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e 9\" x 49\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Load Capacity:\u003c\/strong\u003e 750 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e NT40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Speed Range:\u003c\/strong\u003e 60–4,200 RPM (infinitely variable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxis Feeds:\u003c\/strong\u003e Powered X, Y, and Z\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Readout:\u003c\/strong\u003e Mitutoyo X\/Y-axis DRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 2,400 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baileigh","offers":[{"title":"220V Single Phase","offer_id":43690405789762,"sku":"BA9-1008232","price":28269.0,"currency_code":"USD","in_stock":true},{"title":"220V 3-Phase","offer_id":43690405822530,"sku":"BA9-1008236","price":26619.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-9499x49EVSVerticalMillingMachine.jpg?v=1777465958"},{"product_id":"baileigh-vm-1054-3-10-x-54-evs-vertical-milling-machine","title":"Baileigh VM-1054-3 10\" × 54\" EVS Vertical Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eBaileigh VM-1054-3 10\" × 54\" EVS Vertical Milling Machine\u003c\/h2\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\n\u003cp\u003eAre you running a professional machine shop or industrial fabrication environment that needs a large-table vertical mill with Yaskawa inverter-driven variable speed and full X\/Y\/Z powerfeeds on 220V 3-phase power?\u003c\/p\u003e\n\u003cp\u003eWhat if that mill gave you 800 to 3,800 RPM variable speed, an NT-40 spindle with air drawbar, powered axes, a 2-axis DRO, flood coolant, and central lubrication on a 10-inch by 54-inch precision-ground table?\u003c\/p\u003e\n\u003cp\u003eMeet the Baileigh VM-1054-3, a 10-inch by 54-inch EVS vertical milling machine built for professional machine shops and industrial fabrication environments that need rigid, high-capacity milling with precise speed control.\u003c\/p\u003e\n\u003cp\u003eWith the VM-1054-3, you get a 3 HP motor on 220V 3-phase power, a Yaskawa inverter drive, heavy cast iron construction, and a full set of standard features that support demanding daily machining work.\u003c\/p\u003e\n\u003cp\u003eWhen the VM-1054-3 is set up for your job, you get accurate, repeatable milling results on large stock with a machine built for dependable industrial production use.\u003c\/p\u003e\n\n  \u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/Baileigh_VM-1054-3_10_x_54_EVS_Vertical_Milling_Machine_480x480.jpg?v=1779207996\" alt='Baileigh VM-1054-3 10\" × 54\" EVS Vertical Milling Machine' style=\"margin-bottom: 00000px; float: none;\"\u003e\u003c\/div\u003e\n\n  \n\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBaileigh VM-1054-3 for Industrial Large-Table EVS Vertical Milling Work\u003c\/h3\u003e\n\u003ch4\u003eYaskawa Inverter-Driven Variable Speed from 800 to 3,800 RPM\u003c\/h4\u003e\n\u003cp\u003eThe Yaskawa inverter drive adjusts spindle speed from 800 to 3,800 RPM, delivering smooth power and consistent torque across the full range of milling, drilling, and tapping operations. This inverter-driven system protects tooling and improves surface finish quality on demanding industrial machining work.\u003c\/p\u003e\n\u003ch4\u003ePowered X, Y, and Z Axes and 2-Axis DRO Support Precise Machining\u003c\/h4\u003e\n\u003cp\u003eFull powerfeeds on all three axes deliver smooth, controlled feed rates during milling operations, reducing manual effort and operator fatigue on longer jobs. The 2-axis digital readout provides accurate positioning feedback, reducing setup errors and keeping results consistent on close-tolerance work.\u003c\/p\u003e\n\u003ch4\u003e10\" × 54\" Table and NT-40 Spindle Handle Large Industrial Setups\u003c\/h4\u003e\n\u003cp\u003eThe 10-inch by 54-inch precision-ground table supports workpieces up to 500 lbs. and accommodates larger fixtures and longer stock that smaller table mills cannot handle. The NT-40 spindle taper with air drawbar provides broad tooling compatibility and fast tool changes between operations.\u003c\/p\u003e\n\u003ch4\u003eFlood Coolant, Central Lubrication, and Cast Iron Frame Support Daily Use\u003c\/h4\u003e\n\u003cp\u003eThe flood coolant system manages heat and chip control during cutting to protect tool life on longer production runs. Central lubrication simplifies way maintenance and keeps slide movement smooth and accurate through extended daily machining. Heavy cast iron construction minimizes vibration for accurate cuts and extended tooling service life.\u003c\/p\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? Baileigh VM-1054-3 10\" × 54\" EVS Vertical Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Axis Digital Readout (DRO)\u003c\/strong\u003e — provides accurate positioning feedback for precise and repeatable machining setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir Drawbar\u003c\/strong\u003e — simplifies tool changes on the NT-40 spindle for faster tooling changeover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlood Coolant System\u003c\/strong\u003e — manages heat and chip control during cutting to protect tool life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentral Lubrication System\u003c\/strong\u003e — simplifies way main\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":43690407624770,"sku":"BA9-1008136","price":35199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-1054-310x54EVSVerticalMillingMachine.jpg?v=1777466458"},{"product_id":"baileigh-vm-1258-3-12-x-58-evs-vertical-milling-machine","title":"Baileigh VM-1258-3 12\" × 58\" EVS Vertical Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eBaileigh VM-1258-3 12\" × 58\" EVS Vertical Milling Machine\u003c\/h2\u003e\n\u003cdiv class=\"one-half-column-left\"\u003eAre you running an industrial shop, fabrication facility, or tool room that needs a heavy-duty vertical knee mill with a large table, 5 HP Yaskawa inverter-driven variable speed, and ball screws on 220V 3-phase power?\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhat if that mill gave you 80 to 3,800 RPM, a Mitutoyo 2-axis DRO, powered X\/Y\/Z axes, ball screws on X\/Y, an air drawbar, flood coolant, and central lubrication on a 12-inch by 58-inch precision-ground table?\u003c\/p\u003e\n\u003cp\u003eMeet the Baileigh VM-1258-3, a 12-inch by 58-inch EVS vertical milling machine built for demanding industrial shops and tool rooms that need heavy-duty milling performance on large workpieces with precision positioning.\u003c\/p\u003e\n\u003cp\u003eWith the VM-1258-3, you get a 5 HP motor on 220V 3-phase power, a Yaskawa inverter, robust machine castings with square ways and way covers, and a full factory-installed set of standard features ready for production work.\u003c\/p\u003e\n\u003cp\u003eWhen the VM-1258-3 is set up for your job, you get accurate, repeatable heavy milling results on large stock with a machine built for demanding daily industrial use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\" style=\"text-align: center;\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt='Baileigh VM-1258-3 12\" × 58\" EVS Vertical Milling Machine' src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-1258-312_x58_EVSVerticalMillingMachine2_0307e604-9364-4d3d-a68f-c7a0edf4feb3_480x480.jpg?v=1777547897\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBaileigh VM-1258-3 for Heavy-Duty Industrial Vertical Knee Milling Work\u003c\/h3\u003e\n\u003ch4\u003e5 HP Yaskawa Inverter Delivers Variable Speed from 80 to 3,800 RPM\u003c\/h4\u003e\n\u003cp\u003eThe 5 HP Yaskawa inverter drive adjusts spindle speed from 80 to 3,800 RPM, providing smooth power and consistent torque across heavy milling, drilling, and tapping operations on a wide range of materials. This inverter-driven system handles the demanding cutting conditions that industrial shops and tool rooms require on a daily basis.\u003c\/p\u003e\n\u003ch4\u003eMitutoyo DRO, Ball Screws, and Powered Axes Support Precision Work\u003c\/h4\u003e\n\u003cp\u003eThe Mitutoyo 2-axis DRO provides accurate X\/Y positioning for precise and repeatable machining setups on close-tolerance work. Ball screws on the X and Y axes deliver smooth, backlash-reduced movement, and powered X\/Y\/Z axis feeds reduce operator fatigue on longer milling and facing operations.\u003c\/p\u003e\n\u003ch4\u003e12\" × 58\" Precision Table and NT40 Spindle Handle Large Industrial Setups\u003c\/h4\u003e\n\u003cp\u003eThe 12-inch by 58-inch precision-ground table supports workpieces up to 770 lbs. and accommodates the large fixtures and long stock that heavy industrial milling requires. The NT40 spindle taper with air drawbar provides broad tooling compatibility and fast tool changes between operations without manual spindle locking.\u003c\/p\u003e\n\u003ch4\u003eFlood Coolant, Central Lubrication, and Square Ways Support Daily Production\u003c\/h4\u003e\n\u003cp\u003eThe flood coolant system manages heat and chip control during cutting to protect tool life on heavy production runs. Central lubrication simplifies way maintenance and keeps slide movement smooth through extended daily use. Square ways with way covers provide durable, accurate slide guidance and protect the ways from chips and coolant during demanding machining sessions.\u003c\/p\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? Baileigh VM-1258-3 12\" × 58\" EVS Vertical Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMitutoyo 2-Axis DRO\u003c\/strong\u003e — provides accurate X\/Y positioning for precise and repeatable machining setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir Drawbar\u003c\/strong\u003e — simplifies tool changes on the NT40 spindle for faster tooling changeover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlood Coolant System\u003c\/strong\u003e — manages heat and chip control during cutting to protect tool life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentral Lubrication System\u003c\/strong\u003e — simplifies way maintenance and keeps slide movement smooth during daily use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBaileigh VM-1258-3 12\" × 58\" EVS Vertical Milling Machine Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e VM-1258-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock Number:\u003c\/strong\u003e BA9-1008169\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 5 HP (Yaskawa inverter-driven)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Requirement:\u003c\/strong\u003e 220V, 3-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e 12\" x 58\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Load Capacity:\u003c\/strong\u003e 770 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e NT40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Speed Range:\u003c\/strong\u003e 80–3,800 RPM (variable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxis Feeds:\u003c\/strong\u003e Powered X, Y, and Z\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Screws:\u003c\/strong\u003e X and Y axes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Readout:\u003c\/strong\u003e Mitutoyo 2-axis DRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlide Ways:\u003c\/strong\u003e Square with way covers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 4,300 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Manual:\u003c\/strong\u003e \u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/668815d44b1bdb1a\/original\/VM_1258_2of2_pdf.pdf\"\u003eVM-1258-3 Operator Manual (Part 1 of 2)\u003c\/a\u003e | \u003ca href=\"https:\/\/assets.jpwindustries.com\/m\/5b7043dad9683280\/original\/VM_1258_1of2_pdf.pdf\"\u003eVM-1258-3 Operator Manual (Part 2 of 2)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baileigh","offers":[{"title":"Default Title","offer_id":43690422829122,"sku":"BA9-1008169","price":49499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/BaileighVM-1258-312_x58_EVSVerticalMillingMachine1_5911dc4d-3af8-4abc-af19-00e5f761f287.jpg?v=1777547896"},{"product_id":"jet-jtm-1-9-inch-x-42-inch-vertical-milling-machine","title":"JET JTM-1 9\" × 42\" Vertical Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eJET JTM-1 9\" × 42\" Vertical Milling Machine\u003c\/h2\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you tired of chatter, flex, and inconsistent cuts that force you to re-run operations and lose time on jobs that should be straightforward?\u003c\/p\u003e\n\u003cp\u003eWhat if your mill held its position cut after cut, gave you repeatable depth control, and handled the range of speeds your work actually demands?\u003c\/p\u003e\n\u003cp\u003eMeet the JET JTM-1 9\" × 42\" Vertical Milling Machine, a step pulley knee mill built for serious shop use in metal and general machining work.\u003c\/p\u003e\n\u003cp\u003eWith Certified Meehanite castings, Class 7 spindle bearings, and a three-stage power down feed with automatic stop, this machine is built to hold tolerance and stay in service.\u003c\/p\u003e\n\u003cp\u003eWhen your mill is this solid, you can focus on the work instead of second-guessing your setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"youtube-player\" data-id=\"d1j6nvo5JaA\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JTM-1 for Accurate, Repeatable Milling Work\u003c\/h3\u003e\n\u003ch4\u003eMeehanite Cast Construction Holds the Machine Rigid\u003c\/h4\u003e\n\u003cp\u003eThe column, base, and head are cast from Certified Meehanite iron, a dense, vibration-damping material that keeps the structure stable under cutting load. Flex in the casting is one of the most common causes of poor surface finish and lost tolerance. The JTM-1 addresses that at the foundation. Precision hardened and ground ways carry the table and knee with consistent contact so your cuts track true from start to finish.\u003c\/p\u003e\n\u003ch4\u003eClass 7 Spindle Bearings Maintain Accuracy at the Cutting Tool\u003c\/h4\u003e\n\u003cp\u003eThe spindle runs on Class 7 bearings, a high-precision grade that limits runout and keeps the cutting tool where it needs to be. The milling head is precision bored and honed to match. An internal cooling system in the spindle head carries heat away during extended cuts so the head stays stable and bearing fit is not compromised by thermal expansion.\u003c\/p\u003e\n\u003ch4\u003eThree-Stage Power Down Feed Controls Depth of Cut\u003c\/h4\u003e\n\u003cp\u003eThe quill down feed runs at three selectable rates: .0015, .003, and .006 inches per revolution. An automatic stop lets you set a depth and walk away from the handwheel. The 3-3\/8 inch chromed quill travels 5 inches and accepts R-8 tooling. This setup gives you controlled, repeatable plunge cuts without manual guesswork on depth.\u003c\/p\u003e\n\u003ch4\u003e16-Speed Step Pulley Matches RPM to the Job\u003c\/h4\u003e\n\u003cp\u003eSpindle speeds run from 80 to 5,440 RPM across 16 steps. That range covers slow roughing passes in steel and faster finish work in aluminum or softer materials. The heavy-duty splined motor drive transfers power cleanly through the step pulley system. A one-shot lubrication system keeps the ways and knee serviced without stopping the work.\u003c\/p\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-1_9_x_42_Vertical_Milling_Machine-3-Axis_DRO_X_Y_Powerfeeds_480x480.jpg?v=1777538481\" alt='JET JTM-1 9\" × 42\" Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-1_9_x_42_Vertical_Milling_Machine-X_Y_Powerfeeds_1_480x480.jpg?v=1777537483\" alt='JET JTM-1 9\" × 42\" Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-1_9_x_42_Vertical_Milling_Machine-X_Y_Powerfeeds_480x480.jpg?v=1777537482\" alt='JET JTM-1 9\" × 42\" Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJVM-836-38x36VerticalMillingMachine-X_YPowerfeeds_480x480.jpg?v=1777474530\" alt='JET JTM-1 9\" × 42\" Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\n\u003cbr style=\"clear:both;\"\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? JET JTM-1 9\" × 42\" Vertical Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTolerance Test Sheet\u003c\/strong\u003e — confirms the machine was inspected and verified before leaving the factory.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual\u003c\/strong\u003e — covers setup, operation, and maintenance for the JTM-1.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JTM-1 9\" × 42\" Vertical Milling Machine Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMotor: 2 HP, 230V, 3-Phase\u003c\/li\u003e\n\u003cli\u003eTable Size: 9\" × 42\"\u003c\/li\u003e\n\u003cli\u003eNumber of Spindle Speeds: 16\u003c\/li\u003e\n\u003cli\u003eRange of Spindle Speeds: 80–5,440 RPM\u003c\/li\u003e\n\u003cli\u003eSpindle Taper: R-8\u003c\/li\u003e\n\u003cli\u003eSpindle Travel: 5\"\u003c\/li\u003e\n\u003cli\u003eQuill Diameter: 3-3\/8\"\u003c\/li\u003e\n\u003cli\u003eQuill Down Feed Rates: .0015 \/ .003 \/ .006 IPR\u003c\/li\u003e\n\u003cli\u003eCollet Capacity: 1\/8\"–7\/8\"\u003c\/li\u003e\n\u003cli\u003eTable Longitudinal Travel: 23-7\/8\"\u003c\/li\u003e\n\u003cli\u003eTable Longitudinal Travel With Powerfeed: 20-2\/7\"\u003c\/li\u003e\n\u003cli\u003eTable Cross Travel: 12-1\/2\"\u003c\/li\u003e\n\u003cli\u003eTravel of Knee: 14-1\/2\"\u003c\/li\u003e\n\u003cli\u003eTravel of Ram: 13-3\/8\"\u003c\/li\u003e\n\u003cli\u003eDistance Spindle to Column (Max.): 19\"\u003c\/li\u003e\n\u003cli\u003eMax Distance Spindle to Table: 17-1\/2\"\u003c\/li\u003e\n\u003cli\u003eT-Slot Centers: 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eWork Table Weight Capacity: 550 lbs.\u003c\/li\u003e\n\u003cli\u003eOverall Dimensions (L × W × H): 57\" × 64\" × 82\"\u003c\/li\u003e\n\u003cli\u003eStyle: Step Pulley R-8\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 Year\u003c\/li\u003e\n\u003cli\u003eProp 65: Cancer and Reproductive Harm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eAvailable Configurations\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690082\u003c\/strong\u003e — Base model | No powerfeed | No DRO | Net weight: 2,056 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690019\u003c\/strong\u003e — X-Axis Powerfeed | No DRO | Net weight: 2,100 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690097\u003c\/strong\u003e — X and Y-Axis Powerfeeds | No DRO | Net weight: 2,125 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-692196\u003c\/strong\u003e — 3-Axis Newall DP500 DRO (Knee) | No powerfeed | Net weight: 2,200 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-692191\u003c\/strong\u003e — 3-Axis Newall DP500 DRO (Quill) | X-Axis Powerfeed | Net weight: 2,200 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-692192\u003c\/strong\u003e — 3-Axis Newall DP500 DRO (Quill) | X and Y-Axis Powerfeeds | Net weight: 2,200 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JET","offers":[{"title":"Base Machine","offer_id":43690443472962,"sku":"JT9-690082","price":13309.0,"currency_code":"USD","in_stock":true},{"title":"X-Axis Powerfeed","offer_id":43690443505730,"sku":"JT9-690019","price":14222.0,"currency_code":"USD","in_stock":true},{"title":"X \u0026 Y Powerfeeds","offer_id":43690443538498,"sku":"JT9-690097","price":15289.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO + X Powerfeed","offer_id":43690443571266,"sku":"JT9-692191","price":17687.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO + X \u0026 Y Powerfeeds","offer_id":43690443604034,"sku":"JT9-692192","price":18512.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO","offer_id":43690911825986,"sku":"JT9-692196","price":16279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJTM-19x42VerticalMillingMachine-BaseMachine.jpg?v=1777536563"},{"product_id":"jet-jvm-836-3-vertical-milling-machine","title":"JET JVM-836-3 8\" × 36\" Vertical Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eJET JVM-836-3 8\" × 36\" Vertical Milling Machine\u003c\/h2\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you losing time on setups that should be quick and losing confidence in cuts that should hold tight tolerances?\u003c\/p\u003e\n\u003cp\u003eWhat if your mill held position through every pass and gave you the same result on the hundredth part as it did on the first?\u003c\/p\u003e\n\u003cp\u003eMeet the JET JVM-836-3, an 8\" × 36\" vertical knee mill built for metalworking shops that run three-phase power and need a machine that stays accurate through a full day of work.\u003c\/p\u003e\n\u003cp\u003eWith the JVM-836-3, you get a precision bored and honed milling head paired with a hardened and ground table, dovetail ways ground to close tolerances, and a one-shot lubrication system that keeps every moving surface protected.\u003c\/p\u003e\n\u003cp\u003eWhen your mill holds its tolerances and your setups stay where you put them, you can focus on the work instead of the machine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"youtube-player\" data-id=\"8z7ssGhKzH4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JVM-836-3 for Accurate, Repeatable Knee Milling\u003c\/h3\u003e\n\u003ch4\u003ePrecision Bored and Honed Milling Head Holds Tolerances Through the Cut\u003c\/h4\u003e\n\u003cp\u003eThe milling head on the JVM-836-3 is precision bored and honed to maintain alignment under load. High precision spindle bearings keep runout low so your cuts stay where you set them. Whether you are facing stock or cutting a profile, the head gives you the consistency the work requires.\u003c\/p\u003e\n\u003ch4\u003eHardened and Ground Table Keeps Your Work Stable\u003c\/h4\u003e\n\u003cp\u003eThe 8\" × 36\" table is hardened and ground to a flat, accurate surface. T-slots are spaced at 2-1\/2\" centers to give you reliable fixturing options for a range of workholding setups. Locks on all moving surfaces let you secure the table exactly where you need it before the cutter touches the part.\u003c\/p\u003e\n\u003ch4\u003ePrecision Ground Dovetail Ways Support Smooth, Controlled Movement\u003c\/h4\u003e\n\u003cp\u003eThe dovetail ways are precision ground to keep travel smooth and predictable across the full range of motion. The knee travels 14\", the ram travels 10-1\/2\", and the quill gives you 5\" of spindle travel with three selectable down feed rates. That range of movement lets you position the cutter accurately for both rough and finish work.\u003c\/p\u003e\n\u003ch4\u003eTen-Speed Step Pulley Spindle Covers a Wide Range of Cutting Conditions\u003c\/h4\u003e\n\u003cp\u003eThe step pulley drive gives you ten spindle speeds from 120 to 1,550 RPM. That range lets you match spindle speed to the material and cutter diameter you are running. The large diameter chromed quill moves smoothly and the R-8 spindle taper is a widely supported standard that gives you access to a broad selection of tooling.\u003c\/p\u003e\n\u003cdiv class=\"one-third-column\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJVM-836-38x36VerticalMillingMachine-X_YPowerfeeds_ee5f93b8-ede8-4ab7-9000-40f8c20d9476_480x480.jpg?v=1777559275\" alt='JET JVM-836-3 8\" × 36\" Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"one-third-column\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJVM-836-38x36VerticalMillingMachine-X_YPowerfeeds_2_9156f27a-dd44-45f9-a741-948878c767ca_480x480.jpg?v=1777559275\" alt='JET JVM-836-3 8\" × 36\" Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"one-third-column-last\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJVM-836-38x36VerticalMillingMachine-X-AxisPowerfeed_3a403f64-0093-4066-9210-55773e102424_480x480.jpg?v=1777559192\" alt='JET JVM-836-3 8\" × 36\" Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003cdiv class=\"one-third-column\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/3-Axis_DRO_X_Powerfeed_480x480.jpg?v=1777559629\" alt='JET JVM-836-3 8\" × 36\" Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"one-third-column\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJVM-836-38x36VerticalMillingMachine-X-AxisPowerfeed_1_e9816538-71d6-4c7c-983a-7f736e8e737e_480x480.jpg?v=1777559193\" alt='JET JVM-836-3 8\" × 36\" Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"one-third-column-last\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JVM-836-3_8_x_36_Vertical_Milling_Machine-Base_Machine.jpg?v=1782084364\" alt='JET JVM-836-3 8\" × 36\" Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\n\u003cbr style=\"clear:both;\"\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? JET JVM-836-3 8\" × 36\" Vertical Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJET JVM-836-3 Vertical Knee Mill\u003c\/strong\u003e — The base machine configured for 230V three-phase power with step pulley drive and R-8 spindle taper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-Shot Lubrication System\u003c\/strong\u003e — Delivers oil to all critical bearing surfaces in a single pump stroke to keep the machine protected during use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JVM-836-3 8\" × 36\" Vertical Milling Machine Specifications\u003c\/h3\u003e\n\u003ch4 style=\"text-align: center;\"\u003eAvailable Configurations\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690038\u003c\/strong\u003e — JVM-836-3 | 230V, 3-Phase | Step Pulley | 10 Speeds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690174\u003c\/strong\u003e — JVM-836-3 | 230V, 3-Phase | Step Pulley | 10 Speeds | X-Axis Powerfeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690175\u003c\/strong\u003e — JVM-836-3 | 230V, 3-Phase | Step Pulley | 10 Speeds | X and Y-Axis Powerfeeds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690047\u003c\/strong\u003e — JVM-836-3 | 230V, 3-Phase | Step Pulley | 10 Speeds | X and Y-Axis Powerfeeds | 3-Axis ACU-RITE 203 DRO (Knee)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-691178\u003c\/strong\u003e — JVM-836-1 | 115\/230V, 1-Phase | Step Pulley | 5 Speeds | X and Y-Axis Powerfeeds | 3-Axis Newall DP700 DRO (Quill)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003ePower \u0026amp; Spindle\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1-1\/2 HP, TEFC Induction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V, 3-Phase (JVM-836-3) | 115\/230V, 1-Phase (JVM-836-1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e R-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollet Capacity:\u003c\/strong\u003e 1\/8\" – 7\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Speeds:\u003c\/strong\u003e 10 speeds, 120–1,550 RPM (JVM-836-3) | 5 speeds, 240–1,550 RPM (JVM-836-1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill Diameter:\u003c\/strong\u003e 3-3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill Down Feed Rates:\u003c\/strong\u003e .0015 \/ .003 \/ .006 IPR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eTable \u0026amp; Travel\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e 7-7\/8\" × 35-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Longitudinal Travel:\u003c\/strong\u003e 22-1\/4\" (18\" with powerfeed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Cross Travel:\u003c\/strong\u003e 9-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Slot Centers:\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Slots:\u003c\/strong\u003e 3 slots, 5\/8\" size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork Table Weight Capacity:\u003c\/strong\u003e 500 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnee Travel:\u003c\/strong\u003e 14\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRam Travel:\u003c\/strong\u003e 10-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Spindle to Table:\u003c\/strong\u003e 13-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Spindle to Column:\u003c\/strong\u003e 15-3\/4\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eMachine\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (L × W × H):\u003c\/strong\u003e 55\" × 52\" × 77\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 1,610 lbs. (JVM-836-3 base) — varies by configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual:\u003c\/strong\u003e PDF download available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JET","offers":[{"title":"Base Machine","offer_id":43693218660418,"sku":"JT9-690038","price":11549.0,"currency_code":"USD","in_stock":true},{"title":"X-Axis Powerfeed","offer_id":43693218693186,"sku":"JT9-690174","price":12869.0,"currency_code":"USD","in_stock":true},{"title":"X \u0026 Y Powerfeeds","offer_id":43693218725954,"sku":"JT9-690175","price":13562.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO + X Powerfeed","offer_id":43693218758722,"sku":"JT9-690047","price":18369.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO + X \u0026 Y Powerfeeds","offer_id":43693218791490,"sku":"JT9-691178","price":18699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJVM-836-38x36VerticalMillingMachine-BaseMachine_7e2547d8-01b3-474d-9a59-f08967c99830.jpg?v=1777559047"},{"product_id":"jet-jtm-4vs-9-inch-x-49-inch-variable-speed-vertical-milling-machine","title":"JET JTM-4VS 9\" × 49\" Variable Speed Vertical Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eJET JTM-4VS 9\" x 49\" Variable Speed Vertical Milling Machine\u003c\/h2\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you looking for a vertical mill that holds tight tolerances through long runs without losing its setup?\u003c\/p\u003e\n\u003cp\u003eWhat if your shop had a full-size knee mill that tracked true, ran smooth, and gave you the control to work with confidence?\u003c\/p\u003e\n\u003cp\u003eMeet the JET JTM-4VS 9\" x 49\" Variable Speed Vertical Milling Machine, a Meehanite cast iron knee mill built for accurate, repeatable shop work.\u003c\/p\u003e\n\u003cp\u003eWith hardened and ground ways, a wide variable speed range, and optional powerfeed and DRO configurations, the JTM-4VS fits a range of shop setups and work styles.\u003c\/p\u003e\n\u003cp\u003eWhen the mill holds steady through a cut, you can focus on the work instead of fighting the machine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"youtube-player\" data-id=\"d1j6nvo5JaA\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JTM-4VS for Accurate Vertical Milling Work\u003c\/h3\u003e\n\u003ch4 style=\"text-align: left;\"\u003eMeehanite Cast Iron Frame Reduces Vibration\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe JTM-4VS is built from Certified Meehanite casting, a process that produces a denser, more consistent iron than standard casting methods. A rigid frame absorbs vibration during cuts and keeps the machine stable through longer runs.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eHardened and Ground Ways Support Accurate Table Movement\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003ePrecision hardened and ground ways control table movement across all three axes with consistent resistance and minimal play. Adjustable gibs throughout the machine let you dial in the fit as the machine wears over time.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eVariable Speed Spindle Covers a Wide Range of Work\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe spindle runs from 60 to 4,200 RPM without belt changes, letting you move between materials and operations without stopping the job. Three-stage power downfeed with automatic stop gives you control over quill movement during drilling and boring work.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eOptional Powerfeed and DRO Configurations Extend Shop Capability\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe JTM-4VS is available with X-axis, X and Y-axis, or X, Y and Z-axis powerfeeds for shops that run longer table passes or need hands-free feed control. A 3-axis ACU-RITE 203 DRO is also available on select configurations for shops that want precise position readout at the quill and table.\u003c\/p\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJTM-4VS9x49VariableSpeedVerticalMillingMachine-BaseMachine_3_480x480.jpg?v=1777624749\" alt='JET JTM-4VS 9\" x 49\" Variable Speed Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-4VS_9_x_49_Variable_Speed_Vertical_Milling_Machine-X-Axis_Powerfeed_480x480.jpg?v=1777625101\" alt='JET JTM-4VS 9\" x 49\" Variable Speed Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-4VS_9_x_49_Variable_Speed_Vertical_Milling_Machine-X_Y_Powerfeeds_480x480.jpg?v=1777625423\" alt='JET JTM-4VS 9\" x 49\" Variable Speed Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-4VS_9_x_49_Variable_Speed_Vertical_Milling_Machine-3-Axis_DRO_X_Y_Powerfeeds_480x480.jpg?v=1777627157\" alt='JET JTM-4VS 9\" x 49\" Variable Speed Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? JET JTM-4VS 9\" x 49\" Variable Speed Vertical Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJET JTM-4VS Vertical Milling Machine\u003c\/strong\u003e — Provides the core knee mill platform for accurate vertical milling, drilling, and boring work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTolerance Test Sheet\u003c\/strong\u003e — Documents the machine's accuracy as verified at the factory before shipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JTM-4VS 9\" x 49\" Variable Speed Vertical Milling Machine Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: JTM-4VS\u003c\/li\u003e\n\u003cli\u003eStyle: Variable Speed R8\u003c\/li\u003e\n\u003cli\u003eTable Size: 9\" x 49\"\u003c\/li\u003e\n\u003cli\u003eTable Longitudinal Travel: 34\"\u003c\/li\u003e\n\u003cli\u003eTable Longitudinal Travel With Powerfeed: 28-3\/4\"\u003c\/li\u003e\n\u003cli\u003eTable Cross Travel: 12\"\u003c\/li\u003e\n\u003cli\u003eTravel of Knee: 14-1\/2\"\u003c\/li\u003e\n\u003cli\u003eTravel of Ram: 13-3\/8\"\u003c\/li\u003e\n\u003cli\u003eT-Slot Centers: 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eWork Table Weight Capacity: 660 lbs.\u003c\/li\u003e\n\u003cli\u003eSpindle Taper: R-8\u003c\/li\u003e\n\u003cli\u003eSpindle Travel: 5\"\u003c\/li\u003e\n\u003cli\u003eRange of Spindle Speeds: 60–4,200 RPM\u003c\/li\u003e\n\u003cli\u003eQuill Diameter: 3-3\/8\"\u003c\/li\u003e\n\u003cli\u003eQuill Down Feed Rates: .0015 \/ .003 \/ .006 IPR\u003c\/li\u003e\n\u003cli\u003eCollet Capacity: 1\/8\" – 7\/8\"\u003c\/li\u003e\n\u003cli\u003eDistance Spindle to Column (Max.): 19\"\u003c\/li\u003e\n\u003cli\u003eMax Distance Spindle to Table: 17-1\/2\"\u003c\/li\u003e\n\u003cli\u003eMotor: 3 HP, 230\/460V, 3Ph\u003c\/li\u003e\n\u003cli\u003eOverall Dimensions (L x W x H): 66\" x 63\" x 85\"\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 Year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eSpecs by Configuration\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e230\/460V 3Ph\u003c\/strong\u003e — JT9-690182\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowerfeed: None\u003c\/li\u003e\n\u003cli\u003eDRO: None\u003c\/li\u003e\n\u003cli\u003eNet Weight: 2,175 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWith X-Axis Powerfeed\u003c\/strong\u003e — JT9-690183\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowerfeed: X-Axis\u003c\/li\u003e\n\u003cli\u003eDRO: None\u003c\/li\u003e\n\u003cli\u003eNet Weight: 2,420 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWith X and Y-Axis Powerfeeds\u003c\/strong\u003e — JT9-690008\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowerfeed: X and Y-Axis\u003c\/li\u003e\n\u003cli\u003eDRO: None\u003c\/li\u003e\n\u003cli\u003eNet Weight: 2,420 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWith X, Y and Z-Axis Powerfeeds\u003c\/strong\u003e — JT9-690013\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowerfeed: X, Y and Z-Axis\u003c\/li\u003e\n\u003cli\u003eDRO: None\u003c\/li\u003e\n\u003cli\u003eNet Weight: 2,420 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWith 3-Axis ACU-RITE 203 DRO (Quill)\u003c\/strong\u003e — JT9-690184\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowerfeed: None\u003c\/li\u003e\n\u003cli\u003eDRO: 3-Axis ACU-RITE 203 (Quill)\u003c\/li\u003e\n\u003cli\u003eNet Weight: 2,420 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWith 3-Axis ACU-RITE 203 DRO (Quill) and X-Axis Powerfeed\u003c\/strong\u003e — JT9-690221\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowerfeed: X-Axis\u003c\/li\u003e\n\u003cli\u003eDRO: 3-Axis ACU-RITE 203 (Quill)\u003c\/li\u003e\n\u003cli\u003eNet Weight: 2,240 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWith 3-Axis ACU-RITE 203 DRO (Quill) and X and Y-Axis Powerfeeds\u003c\/strong\u003e — JT9-690140\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowerfeed: X and Y-Axis\u003c\/li\u003e\n\u003cli\u003eDRO: 3-Axis ACU-RITE 203 (Quill)\u003c\/li\u003e\n\u003cli\u003eNet Weight: 2,420 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JET","offers":[{"title":"Base Machine","offer_id":43694085898306,"sku":"JT9-690182","price":14629.0,"currency_code":"USD","in_stock":true},{"title":"X-Axis Powerfeed","offer_id":43694085931074,"sku":"JT9-690183","price":16697.0,"currency_code":"USD","in_stock":true},{"title":"X \u0026 Y Powerfeeds","offer_id":43694085963842,"sku":"JT9-690008","price":17302.0,"currency_code":"USD","in_stock":true},{"title":"X Y \u0026 Z Powerfeeds","offer_id":43694085996610,"sku":"JT9-690013","price":18699.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO","offer_id":43694086029378,"sku":"JT9-690184","price":19799.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO + X Powerfeed","offer_id":43694086062146,"sku":"JT9-690221","price":20019.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO + X \u0026 Y Powerfeeds","offer_id":43694086094914,"sku":"JT9-690140","price":21999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJTM-4VS9x49VariableSpeedVerticalMillingMachine-BaseMachine_3.jpg?v=1777624749"},{"product_id":"jet-jtm-949evs-9-inch-x-49-inch-electronic-variable-speed-vertical-milling-machine","title":"JET JTM-949EVS 9\" × 49\" Electronic Variable Speed Vertical Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eJET JTM-949EVS 9\" × 49\" Electronic Variable Speed Vertical Milling Machine\u003c\/h2\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you losing time adjusting spindle speed by hand every time your material or cut type changes?\u003c\/p\u003e\n\u003cp\u003eWhat if your mill could move from a slow facing pass to a high-speed finish cut without stopping to swap belts or change gears?\u003c\/p\u003e\n\u003cp\u003eMeet the JET JTM-949EVS, a 9\" × 49\" electronic variable speed vertical knee mill built for shops that need consistent, repeatable results across a range of materials and operations.\u003c\/p\u003e\n\u003cp\u003eWith the JTM-949EVS, you get a Meehanite-cast column and base, Class 7 spindle bearings, and a 60 to 4,500 RPM variable speed range controlled through a swing-away panel within easy reach at the table.\u003c\/p\u003e\n\u003cp\u003eWhen your mill holds its setup, responds to speed changes without interruption, and keeps the spindle running cool and true, you can focus on the work instead of the machine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"youtube-player\" data-id=\"d1j6nvo5JaA\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JTM-949EVS for Accurate, Repeatable Vertical Milling\u003c\/h3\u003e\n\u003ch4 style=\"text-align: left;\"\u003eMeehanite Cast Column and Base Holds the Machine Rigid Under Load\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe column and base on the JTM-949EVS are cast using the certified Meehanite process, which produces a dense, stable casting that resists flex during heavy cuts. This matters most when you are taking deep passes or pushing larger end mills through hard material. A rigid base keeps the spindle in alignment and reduces chatter so the cut comes out clean from start to finish.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eClass 7 Spindle Bearings Maintain Accuracy in Heavy Cutting\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eClass 7 spindle bearings are rated for the higher speeds and side loads that come with milling work. They support the spindle with less runout, which translates directly to surface quality and dimensional accuracy on the part. The spindle head is also internally cooled, which keeps bearing and belt temperatures in check during extended runs and helps both last longer between service intervals.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eTurcite-B Way Coating Reduces Vibration on X and Y Travel\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe X and Y-axis ways are coated with Turcite-B, a low-friction material that dampens vibration as the table moves. You get a smoother feel during hand cranking and less surface roughness on the finished part. The 9\" × 49\" table offers 36\" of longitudinal travel and 12-5\/8\" of cross travel, with hardened and precision-ground surfaces rated to 54 HRC for long-term wear resistance.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eAutomatic Oiler Keeps Way Lubrication on Schedule\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe automatic oiler delivers 3 to 6 cc of lubrication every 30 minutes without any action required from the operator. Way lubrication is easy to neglect during a busy session, and skipping it leads to wear that shows up gradually in fit and surface quality. This system keeps the schedule on its own so the ways stay protected through long jobs and short ones alike.\u003c\/p\u003e\n\u003cdiv class=\"one-third-column\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJTM-949EVS9x49ElectronicVariableSpeedVerticalMillingMachine-BaseMachine_480x480.jpg?v=1777686172\" alt='JET JTM-949EVS 9\" x 49\" Electronic Variable Speed Vertical Milling Machine'\u003e\u003c\/div\u003e\n\u003cdiv class=\"one-third-column\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-949EVS_9_x_49_Electronic_Variable_Speed_Vertical_Milling_Machine-X-Axis_Powerfeed_480x480.jpg?v=1777687492\" alt='JET JTM-949EVS 9\" x 49\" Electronic Variable Speed Vertical Milling Machine'\u003e\u003c\/div\u003e\n\u003cdiv class=\"one-third-column-last\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-949EVS_9_x_49_Electronic_Variable_Speed_Vertical_Milling_Machine-X_Y_Powerfeeds_480x480.jpg?v=1777687609\" alt='JET JTM-949EVS 9\" x 49\" Electronic Variable Speed Vertical Milling Machine'\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003cdiv class=\"one-third-column\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-949EVS_9_x_49_Electronic_Variable_Speed_Vertical_Milling_Machine-X_Y_Z_Powerfeeds_1_480x480.jpg?v=1777687768\" alt='JET JTM-949EVS 9\" x 49\" Electronic Variable Speed Vertical Milling Machine'\u003e\u003c\/div\u003e\n\u003cdiv class=\"one-third-column\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-949EVS_9_x_49_Electronic_Variable_Speed_Vertical_Milling_Machine-3-Axis_DRO_1_480x480.jpg?v=1777687995\" alt='JET JTM-949EVS 9\" x 49\" Electronic Variable Speed Vertical Milling Machine'\u003e\u003c\/div\u003e\n\u003cdiv class=\"one-third-column-last\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-949EVS_9_x_49_Electronic_Variable_Speed_Vertical_Milling_Machine-3-Axis_DRO_X_Y_Powerfeeds_480x480.jpg?v=1777688579\" alt='JET JTM-949EVS 9\" x 49\" Electronic Variable Speed Vertical Milling Machine'\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? JET JTM-949EVS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJET JTM-949EVS Vertical Knee Mill\u003c\/strong\u003e — the base machine with electronic variable speed drive, Meehanite-cast column, and 9\" × 49\" hardened table, ready for shop use at 230V, 3-phase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing-Away Control Box\u003c\/strong\u003e — positions the e-stop and all operating controls within reach at the table so you can respond quickly without stepping away from the work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing-Away Safety Shield\u003c\/strong\u003e — provides operator protection at the spindle and moves clear when you need full access to the work area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JTM-949EVS 9\" × 49\" Electronic Variable Speed Vertical Milling Machine Specifications\u003c\/h3\u003e\n\u003ch4 style=\"text-align: center;\"\u003eAvailable Configurations\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-691500\u003c\/strong\u003e — JTM-949EVS | 230V, 3-Phase | Electronic Variable Speed | 60–4,500 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690501\u003c\/strong\u003e — JTM-949EVS | 230V, 3-Phase | Electronic Variable Speed | 60–4,500 RPM | X-Axis Powerfeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690503\u003c\/strong\u003e — JTM-949EVS | 230V, 3-Phase | Electronic Variable Speed | 60–4,500 RPM | X and Y-Axis Powerfeeds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690504\u003c\/strong\u003e — JTM-949EVS | 230V, 3-Phase | Electronic Variable Speed | 60–4,500 RPM | X, Y and Z-Axis Powerfeeds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690525\u003c\/strong\u003e — JTM-949EVS | 230V, 3-Phase | Electronic Variable Speed | 60–4,500 RPM | X-Axis Powerfeed | 3-Axis Acu-Rite 203 DRO (Knee)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690530\u003c\/strong\u003e — JTM-949EVS | 230V, 3-Phase | Electronic Variable Speed | 60–4,500 RPM | X-Axis Powerfeed | 3-Axis Acu-Rite 203 DRO (Quill)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690532\u003c\/strong\u003e — JTM-949EVS | 230V, 3-Phase | Electronic Variable Speed | 60–4,500 RPM | X and Y-Axis Powerfeeds | 3-Axis Acu-Rite 203 DRO (Quill)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003ePower \u0026amp; Spindle\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3HP, 230V, 3-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter Type:\u003c\/strong\u003e Delta, B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Speeds:\u003c\/strong\u003e 60–4,500 RPM (electronic variable speed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e R-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill Diameter:\u003c\/strong\u003e 3-3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill Down Feed Rates:\u003c\/strong\u003e .0015 \/ .003 \/ .006 IPR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollet Capacity:\u003c\/strong\u003e 1\/8\"–7\/8\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eTable \u0026amp; Travel\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e 9\" × 49\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Longitudinal Travel:\u003c\/strong\u003e 36\" (30-3\/4\" with powerfeed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Cross Travel:\u003c\/strong\u003e 12-5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Slot Centers:\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork Table Weight Capacity:\u003c\/strong\u003e 720 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaddle Width:\u003c\/strong\u003e 11-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel of Knee:\u003c\/strong\u003e 15-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel of Ram:\u003c\/strong\u003e 15-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Distance Spindle to Table:\u003c\/strong\u003e 20-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistance Spindle to Column (Max.):\u003c\/strong\u003e 18-1\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColumn Width:\u003c\/strong\u003e 18\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eMachine\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (L × W × H):\u003c\/strong\u003e 66\" × 63\" × 86\" (base unit) | 67\" × 64\" × 86\" (powerfeed configurations)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 2,275 lbs. (base unit) | 2,420 lbs. (powerfeed configurations)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CSA\/CUS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual:\u003c\/strong\u003e PDF download available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JET","offers":[{"title":"Base Machine","offer_id":43694900379714,"sku":"JT9-691500","price":19689.0,"currency_code":"USD","in_stock":true},{"title":"X-Axis Powerfeed","offer_id":43694900412482,"sku":"JT9-690501","price":21779.0,"currency_code":"USD","in_stock":true},{"title":"X \u0026 Y Powerfeeds","offer_id":43694900445250,"sku":"JT9-690503","price":23099.0,"currency_code":"USD","in_stock":true},{"title":"X Y \u0026 Z Powerfeeds","offer_id":43694900478018,"sku":"JT9-690504","price":24419.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO","offer_id":43694900510786,"sku":"JT9-690525","price":24199.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO + X Powerfeed","offer_id":43694900543554,"sku":"JT9-690530","price":24144.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO + X \u0026 Y Powerfeeds","offer_id":43694900576322,"sku":"JT9-690532","price":27114.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJTM-949EVS9x49ElectronicVariableSpeedVerticalMillingMachine-BaseMachine.jpg?v=1777686172"},{"product_id":"jet-jtm-1050evs2-10-inch-x-50-inch-electronic-variable-speed-vertical-milling-machine","title":"JET JTM-1050EVS2 10\" × 50\" Electronic Variable Speed Vertical Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eJET JTM-1050EVS2 10\" × 50\" Electronic Variable Speed Vertical Milling Machine\u003c\/h2\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you losing time between cuts resetting speeds by hand and fighting a table that drifts under load?\u003c\/p\u003e\n\u003cp\u003eWhat if your mill held position through every pass and let you dial in the right spindle speed without stopping the work?\u003c\/p\u003e\n\u003cp\u003eMeet the JET JTM-1050EVS2 10\" × 50\" Electronic Variable Speed Vertical Milling Machine, a full-size knee mill built for shops that demand consistent results on steel, aluminum, and cast iron day after day.\u003c\/p\u003e\n\u003cp\u003eWith the JTM-1050EVS2, you get a Meehanite-cast column and base, Class 7 spindle bearings, Turcite-B way coating, and a variable speed range of 60 to 4,500 RPM that covers facing, boring, and end milling without a belt change.\u003c\/p\u003e\n\u003cp\u003eWhen this machine is on your floor, you spend less time setting up and more time cutting to spec.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv data-id=\"QigSfyZ-imA\" class=\"youtube-player\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JTM-1050EVS2 for Accurate, Repeatable Milling on Metal\u003c\/h3\u003e\n\u003ch4\u003eMeehanite-Cast Column and Base Resist Flex Under Load\u003c\/h4\u003e\n\u003cp\u003eThe column and base are cast using the certified Meehanite process, which produces a dense, consistent iron structure. That rigidity keeps the spindle in alignment when you are taking heavy cuts in steel or cast iron. The base also incorporates a leveling design that lets you set the machine flat without raising it off the floor.\u003c\/p\u003e\n\u003ch4\u003eClass 7 Spindle Bearings Maintain Accuracy in Heavy Cuts\u003c\/h4\u003e\n\u003cp\u003eClass 7 spindle bearings are rated for high-load, high-speed operation. They support the spindle against radial and axial forces so your cuts stay true under pressure. The spindle head is internally cooled, which pulls heat away from the bearings and motor during extended runs and extends their service life.\u003c\/p\u003e\n\u003ch4\u003eElectronic Variable Speed Drive Covers 60 to 4,500 RPM\u003c\/h4\u003e\n\u003cp\u003eThe Delta inverter-driven variable speed system lets you set spindle speed with a dial rather than swapping belts. The 60 to 4,500 RPM range handles everything from slow-speed facing on large-diameter cutters to high-speed finishing on aluminum. Speed changes happen without stopping or reaching inside the head.\u003c\/p\u003e\n\u003ch4\u003eTurcite-B Way Coating and Dual Axis Locks Keep Table Position\u003c\/h4\u003e\n\u003cp\u003eThe X and Y-axis ways are coated with Turcite-B, a low-friction bearing material that reduces vibration and keeps table movement smooth and consistent. Dual locks on every moveable surface let you fix position on any axis before a cut. The table and ways are hardened to 54 HRC and precision ground, so contact surfaces stay accurate under daily use.\u003c\/p\u003e\n\u003cdiv class=\"one-third-column\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJTM-1050EVS210x50ElectronicVariableSpeedVerticalMillingMachine-BaseMachine_480x480.jpg?v=1777691364\" alt=\"JET JTM-1050EVS2 10 x 50 Electronic Variable Speed Vertical Milling Machine\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"one-third-column\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-1050EVS2_10_x_50_Electronic_Variable_Speed_Vertical_Milling_Machine-X-Axis_Powerfeed_480x480.jpg?v=1777691655\" alt=\"JET JTM-1050EVS2 10 x 50 Electronic Variable Speed Vertical Milling Machine\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"one-third-column-last\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-1050EVS2_10_x_50_Electronic_Variable_Speed_Vertical_Milling_Machine-X_Y_Powerfeeds_480x480.jpg?v=1777691984\" alt=\"JET JTM-1050EVS2 10 x 50 Electronic Variable Speed Vertical Milling Machine\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003cdiv class=\"one-third-column\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-1050EVS2_10_x_50_Electronic_Variable_Speed_Vertical_Milling_Machine-X_Y_Z_Powerfeeds_6_480x480.jpg?v=1777692496\" alt=\"JET JTM-1050EVS2 10 x 50 Electronic Variable Speed Vertical Milling Machine\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"one-third-column\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-1050EVS2_10_x_50_Electronic_Variable_Speed_Vertical_Milling_Machine-3-Axis_DRO_X_Powerfeed_480x480.jpg?v=1777693265\" alt=\"JET JTM-1050EVS2 10 x 50 Electronic Variable Speed Vertical Milling Machine\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"one-third-column-last\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-1050EVS2_10_x_50_Electronic_Variable_Speed_Vertical_Milling_Machine-3-Axis_DRO_X_Y_Powerfeeds_1_480x480.jpg?v=1777693479\" alt=\"JET JTM-1050EVS2 10 x 50 Electronic Variable Speed Vertical Milling Machine\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? JET JTM-1050EVS2 10\" × 50\" Electronic Variable Speed Vertical Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing-Away Control Box\u003c\/strong\u003e — Mounts at the operator position and houses the e-stop along with all primary controls so adjustments stay within reach during a cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing-Away Safety Shield\u003c\/strong\u003e — Positions in front of the spindle to protect the operator from chips and coolant during milling operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Oiler\u003c\/strong\u003e — Delivers 3 to 6 cc of lubrication to the ways at timed intervals to maintain consistent way lubrication without manual attention.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Electrical Box with Dual 115V Outlets\u003c\/strong\u003e — Relocated to the back of the machine and includes two 115V accessory outlets for powering lights, DRO units, or other shop accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JTM-1050EVS2 10\" × 50\" Electronic Variable Speed Vertical Milling Machine Specifications\u003c\/h3\u003e\n\u003ch4 style=\"text-align: center;\"\u003eAvailable Configurations\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-691600\u003c\/strong\u003e — JTM-1050EVS2\/230 | 230V, 3-Phase | Electronic Variable Speed | Base Model\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690601\u003c\/strong\u003e — JTM-1050EVS2\/230 | 230V, 3-Phase | Electronic Variable Speed | X-Axis Powerfeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690603\u003c\/strong\u003e — JTM-1050EVS2\/230 | 230V, 3-Phase | Electronic Variable Speed | X and Y-Axis Powerfeeds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690604\u003c\/strong\u003e — JTM-1050EVS2\/230 | 230V, 3-Phase | Electronic Variable Speed | X, Y and Z-Axis Powerfeeds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690624\u003c\/strong\u003e — JTM-1050EVS2\/230 | 230V, 3-Phase | Electronic Variable Speed | X-Axis Powerfeed | 3-Axis Acu-Rite 203 DRO (Knee)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690626\u003c\/strong\u003e — JTM-1050EVS2\/230 | 230V, 3-Phase | Electronic Variable Speed | X and Y-Axis Powerfeeds | 3-Axis Acu-Rite 203 DRO (Knee)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690628\u003c\/strong\u003e — JTM-1050EVS2\/230 | 230V, 3-Phase | Electronic Variable Speed | X, Y and Z-Axis Powerfeeds | 3-Axis Acu-Rite 203 DRO (Knee)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003ePower \u0026amp; Spindle\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3 HP, 230V, 3-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter Type:\u003c\/strong\u003e Delta, B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange of Spindle Speeds:\u003c\/strong\u003e 60–4,500 RPM (Electronic Variable Speed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e R-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollet Capacity:\u003c\/strong\u003e 1\/8\"–7\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill Diameter:\u003c\/strong\u003e 3-3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill Down Feed Rates:\u003c\/strong\u003e .0015 \/ .003 \/ .006 IPR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eTable \u0026amp; Travel\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e 10\" × 50\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Longitudinal Travel:\u003c\/strong\u003e 35-1\/3\" (29-7\/8\" with powerfeed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Cross Travel:\u003c\/strong\u003e 14-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Slot Centers:\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork Table Weight Capacity:\u003c\/strong\u003e 840 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel of Knee:\u003c\/strong\u003e 16-1\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel of Ram:\u003c\/strong\u003e 15-7\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaddle Width:\u003c\/strong\u003e 11-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Distance Spindle to Table:\u003c\/strong\u003e 20-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistance Spindle to Column (Max.):\u003c\/strong\u003e 26-3\/4\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eMachine\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColumn Width:\u003c\/strong\u003e 20\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (L × W × H):\u003c\/strong\u003e 66\" × 63\" × 87\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 2,860 lbs. (base model) — varies by configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual:\u003c\/strong\u003e PDF download available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JET","offers":[{"title":"Base Machine","offer_id":43696103555138,"sku":"JT9-691600","price":20899.0,"currency_code":"USD","in_stock":true},{"title":"X-Axis Powerfeed","offer_id":43696103587906,"sku":"JT9-690601","price":22549.0,"currency_code":"USD","in_stock":true},{"title":"X \u0026 Y Powerfeeds","offer_id":43696103620674,"sku":"JT9-690603","price":24199.0,"currency_code":"USD","in_stock":true},{"title":"X Y \u0026 Z Powerfeeds","offer_id":43696103653442,"sku":"JT9-690604","price":25739.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO","offer_id":43696103686210,"sku":"JT9-690628","price":29699.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO + X Powerfeed","offer_id":43696103718978,"sku":"JT9-690624","price":26839.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO + X \u0026 Y Powerfeeds","offer_id":43696103751746,"sku":"JT9-690626","price":28159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJTM-1050EVS210x50ElectronicVariableSpeedVerticalMillingMachine-BaseMachine.jpg?v=1777691364"},{"product_id":"jet-jtm-1254vs-12-inch-x-54-inch-variable-speed-vertical-milling-machine","title":"JET JTM-1254VS 12\" × 54\" Variable Speed Vertical Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eJET JTM-1254VS 12\" × 54\" Variable Speed Vertical Milling Machine\u003c\/h2\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you pushing through milling jobs on a machine that can't hold tolerance or keep up with the variety of work your shop demands?\u003c\/p\u003e\n\u003cp\u003eWhat if your mill could handle anything from light finishing passes to heavy stock removal without stopping to change gears or fight the setup?\u003c\/p\u003e\n\u003cp\u003eMeet the JET JTM-1254VS, a 12\" × 54\" variable speed vertical knee mill built for serious metalworking and machining shops that need reliable, repeatable results day in and day out.\u003c\/p\u003e\n\u003cp\u003eWith Certified Meehanite castings, precision hardened and ground ways, and a variable speed spindle that sweeps from 80 to 3,800 RPM, the JTM-1254VS is built to hold tight tolerances across a full range of operations.\u003c\/p\u003e\n\u003cp\u003eWhen you set up a job on this machine, you get clean cuts, consistent depth, and a table that locks down exactly where you put it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"youtube-player\" data-id=\"d1j6nvo5JaA\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JTM-1254VS for Accurate, Heavy-Duty Vertical Milling\u003c\/h3\u003e\n\u003ch4 style=\"text-align: left;\"\u003eCertified Meehanite Castings Deliver a Stable Milling Platform\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe JTM-1254VS is built on Certified Meehanite castings throughout. Meehanite is a controlled-process gray iron known for vibration damping and dimensional stability. That foundation keeps the machine rigid under load, which means your cuts stay on line and your surface finish stays clean even when you are taking aggressive passes.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eVariable Speed Spindle Covers the Full Range of Milling Work\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe spindle runs from 80 to 3,800 RPM without stopping to change gears. You dial in the right speed for each tool and material directly at the machine. Whether you are running a large face mill through steel or spinning a small end mill in aluminum, the right speed is always available without interrupting your workflow.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eAutomatic Lubrication Reduces Maintenance Demands\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe JTM-1254VS runs an automatic lubrication cycle every 180 minutes, delivering 3 to 6cc to the ways and moving surfaces. This keeps the table and knee moving smoothly without relying on the operator to remember manual oiling. Consistent lubrication extends the life of the ways and helps the machine hold its accuracy over time.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eThree-Stage Power Downfeed Controls Depth of Cut\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe three-stage power downfeed gives you three selectable feed rates — .0015, .003, and .008 inches per revolution — with an automatic stop to end the cut at the depth you set. The quick-nut spindle feed lets you position the quill fast between operations. The heavy-duty spindle brake stops spindle rotation quickly when you need to change tools or inspect your work.\u003c\/p\u003e\n\n\u003cdiv class=\"one-third-column\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJTM-1254VS12x54VariableSpeedVerticalMillingMachine-BaseMachine_1_480x480.jpg?v=1777700574\" alt='JET JTM-1254VS 12\" x 54\" Variable Speed Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-third-column\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-1254VS_12_x_54_Variable_Speed_Vertical_Milling_Machine-X-Axis_Powerfeed_480x480.jpg?v=1777700703\" alt='JET JTM-1254VS 12\" x 54\" Variable Speed Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-third-column-last\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-1254VS_12_x_54_Variable_Speed_Vertical_Milling_Machine_480x480.jpg?v=1782096594\" alt='JET JTM-1254VS 12\" x 54\" Variable Speed Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003cdiv class=\"one-third-column\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-1254VS_12_x_54_Variable_Speed_Vertical_Milling_Machine-X_Y_Powerfeeds_480x480.jpg?v=1777700864\" alt='JET JTM-1254VS 12\" x 54\" Variable Speed Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-third-column\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-1254VS_12_x_54_Variable_Speed_Vertical_Milling_Machine-3-Axis_DRO_X_Y_Powerfeeds_480x480.jpg?v=1777701569\" alt='JET JTM-1254VS 12\" x 54\" Variable Speed Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-third-column-last\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JTM-1254VS_12_x_54_Variable_Speed_Vertical_Milling_Machine_1_480x480.jpg?v=1782096594\" alt='JET JTM-1254VS 12\" x 54\" Variable Speed Vertical Milling Machine'\u003e\n\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? JET JTM-1254VS 12\" × 54\" Variable Speed Vertical Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJTM-1254VS Vertical Knee Mill\u003c\/strong\u003e — The base machine with Certified Meehanite castings, variable speed head, and precision hardened and ground ways and table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual\u003c\/strong\u003e — Available as a PDF download for machine setup, operation, and maintenance reference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JTM-1254VS 12\" × 54\" Variable Speed Vertical Milling Machine Specifications\u003c\/h3\u003e\n\u003ch4 style=\"text-align: center;\"\u003eAvailable Configurations\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-690025\u003c\/strong\u003e — JTM-1254VS | 230\/460V, 3-Phase | Variable Speed NT40 | Base Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-698025\u003c\/strong\u003e — JTM-1254VS | 230\/460V, 3-Phase | Variable Speed NT40 | X-Axis Powerfeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-698027\u003c\/strong\u003e — JTM-1254VS | 230\/460V, 3-Phase | Variable Speed NT40 | X and Y-Axis Powerfeeds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-698029\u003c\/strong\u003e — JTM-1254VS | 230\/460V, 3-Phase | Variable Speed NT40 | X, Y and Z-Axis Powerfeeds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-698055\u003c\/strong\u003e — JTM-1254VS | 230\/460V, 3-Phase | Variable Speed NT40 | ACU-RITE 203 3-Axis DRO (Knee) | X-Axis Powerfeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-698057\u003c\/strong\u003e — JTM-1254VS | 230\/460V, 3-Phase | Variable Speed NT40 | ACU-RITE 203 3-Axis DRO (Knee) | X and Y-Axis Powerfeeds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-698059\u003c\/strong\u003e — JTM-1254VS | 230\/460V, 3-Phase | Variable Speed NT40 | ACU-RITE 203 3-Axis DRO (Knee) | X, Y and Z-Axis Powerfeeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003ePower \u0026amp; Spindle\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 5HP, 230\/460V, 3-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e NST #40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollet Capacity:\u003c\/strong\u003e 1\/8\" – 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange of Spindle Speeds:\u003c\/strong\u003e 80–3,800 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill Diameter:\u003c\/strong\u003e 4-1\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill Down Feed Rates:\u003c\/strong\u003e .0015 \/ .003 \/ .008 IPR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eTable \u0026amp; Travel\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size (L × W):\u003c\/strong\u003e 12\" × 54\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Longitudinal Travel:\u003c\/strong\u003e 33-7\/8\" (28-1\/4\" with Powerfeed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Cross Travel:\u003c\/strong\u003e 15-1\/3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Slot Centers:\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Slots:\u003c\/strong\u003e 3 precision ground slots\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork Table Weight Capacity:\u003c\/strong\u003e 925 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel of Knee:\u003c\/strong\u003e 19-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel of Ram:\u003c\/strong\u003e 25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaddle Width:\u003c\/strong\u003e 25-5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Distance Spindle to Table:\u003c\/strong\u003e 23\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistance Spindle to Column (Max.):\u003c\/strong\u003e 27-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColumn Width:\u003c\/strong\u003e 14-1\/4\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eMachine\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (L × W × H):\u003c\/strong\u003e 92-1\/8\" × 79-7\/8\" × 104-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 3,260 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight:\u003c\/strong\u003e 3,969 lbs. (base machine) — varies by configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e JET Red Assurance 2-Year Warranty. Service and repair available through JET Authorized Service Centers nationwide. Call 1-800-274-6848 for the nearest location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProp 65:\u003c\/strong\u003e Cancer and Reproductive Harm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual:\u003c\/strong\u003e PDF download available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JET","offers":[{"title":"Base Machine","offer_id":43696145760322,"sku":"JT9-690025","price":23484.0,"currency_code":"USD","in_stock":true},{"title":"X-Axis Powerfeed","offer_id":43696145793090,"sku":"JT9-698025","price":24309.0,"currency_code":"USD","in_stock":true},{"title":"X \u0026 Y Powerfeeds","offer_id":43696145825858,"sku":"JT9-698027","price":25684.0,"currency_code":"USD","in_stock":true},{"title":"X Y \u0026 Z Powerfeeds","offer_id":43696145858626,"sku":"JT9-698029","price":27059.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO + X Powerfeed","offer_id":43696145891394,"sku":"JT9-698055","price":28709.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO + X \u0026 Y Powerfeeds","offer_id":43696145924162,"sku":"JT9-698057","price":30139.0,"currency_code":"USD","in_stock":true},{"title":"3-Axis DRO + X Y \u0026 Z Powerfeeds","offer_id":43696145956930,"sku":"JT9-698059","price":31899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJTM-1254VS12x54VariableSpeedVerticalMillingMachine-BaseMachine.jpg?v=1777700575"},{"product_id":"jet-jmd-15-benchtop-milling-machine-with-r-8-spindle","title":"JET JMD-15 Benchtop Milling Machine with R-8 Spindle","description":"\u003ch2 style=\"text-align: center;\"\u003eJET JMD-15 Benchtop Milling Machine with R-8 Spindle\u003c\/h2\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you working with limited floor space but still need real milling and drilling capability in your shop?\u003c\/p\u003e\n\u003cp\u003eWhat if you could run coordinated table work and drill press operations from a single benchtop machine without giving up the control that accurate machining requires?\u003c\/p\u003e\n\u003cp\u003eMeet the JET JMD-15 Benchtop Milling Machine with R-8 Spindle, a mill\/drill combination built for light machining work where floor space and budget both matter.\u003c\/p\u003e\n\u003cp\u003eWith the JMD-15, you get a one-piece cast iron column, a full 12-speed belt drive, and an R-8 spindle taper that accepts a wide range of standard tooling already common in most shops.\u003c\/p\u003e\n\u003cp\u003eWhen you need a machine that handles both drilling and light milling from the same footprint, the JMD-15 keeps your work moving without asking for more space than you have.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"youtube-player\" data-id=\"qy7YJhpJFHA\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JMD-15 for Benchtop Milling and Drilling Work\u003c\/h3\u003e\n\u003ch4\u003eOne-Piece Cast Iron Column Holds the Head Steady\u003c\/h4\u003e\n\u003cp\u003eThe column on the JMD-15 is cast as a single piece, which removes flex points that can introduce chatter or shift your position mid-cut. On a benchtop mill\/drill, column rigidity has a direct effect on hole accuracy and surface finish. That solid foundation carries through to every pass you make across the table.\u003c\/p\u003e\n\u003ch4\u003eR-8 Spindle Taper Works with Standard Shop Tooling\u003c\/h4\u003e\n\u003cp\u003eThe R-8 taper is one of the most common spindle standards in light milling work, which means collets, end mill holders, and other tooling are easy to source. The locking collet design keeps your cutting tool seated under lateral load so it does not pull away from the spindle during milling passes. This keeps your cuts where you set them.\u003c\/p\u003e\n\u003ch4\u003e12-Speed Belt Drive Matches RPM to the Material\u003c\/h4\u003e\n\u003cp\u003eWith 12 spindle speeds ranging from 110 to 2,580 RPM, the JMD-15 lets you match your cutting speed to the material and tooling you are running. Slower speeds suit larger cutters and harder stock. Higher speeds work for smaller diameter tools and softer metals. Having that range on a benchtop machine means fewer compromises when the work changes.\u003c\/p\u003e\n\u003ch4\u003e360-Degree Head Swivel and Coordinated Table Travel Extend Your Options\u003c\/h4\u003e\n\u003cp\u003eThe head rotates a full 360 degrees, and the table provides 14 inches of longitudinal travel with standard T-slot clamping. That combination lets you position the work accurately and approach it from angles a standard drill press cannot reach. The external depth gauge gives you a clear read on quill position so you are not guessing on through-holes or blind bores.\u003c\/p\u003e\n\n\u003cdiv class=\"one-third-column\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJMD-15BenchtopMillingMachinewithR-8Spindle-BaseMachine_480x480.jpg?v=1777853673\" alt=\"JET JMD-15 Benchtop Milling Machine with R-8 Spindle\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-third-column\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJMD-15BenchtopMillingMachinewithR-8Spindle-BaseMachine_1_480x480.jpg?v=1777853673\" alt=\"JET JMD-15 Benchtop Milling Machine with R-8 Spindle\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-third-column-last\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJMD-15BenchtopMillingMachinewithR-8Spindle-BaseMachine_2_480x480.jpg?v=1777853673\" alt=\"JET JMD-15 Benchtop Milling Machine with R-8 Spindle\"\u003e\n\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n  \n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? JET JMD-15 Benchtop Milling Machine with R-8 Spindle\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/2\" Drill Chuck and Chuck Arbor\u003c\/strong\u003e — Mounts to the R-8 spindle for standard drilling operations right out of the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Carbide Facemill\u003c\/strong\u003e — Allows face milling passes on your workpiece without needing to source a separate cutter to get started.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JMD-15 Benchtop Milling Machine with R-8 Spindle Specifications\u003c\/h3\u003e\n\u003ch4 style=\"text-align: center;\"\u003eAvailable Configurations\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-350017\u003c\/strong\u003e — JMD-15 | 115\/230V, 1-Phase | R-8 Spindle Taper | Base Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-350116\u003c\/strong\u003e — JMD-15 | 115\/230V, 1-Phase | R-8 Spindle Taper | ACU-RITE 203 DRO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003ePower \u0026amp; Spindle\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1 HP, 115\/230V, 1-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e R-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Spindle Speeds:\u003c\/strong\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange of Spindle Speeds:\u003c\/strong\u003e 110–2,580 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 3-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill Diameter:\u003c\/strong\u003e 2-7\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Capacity:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eTable \u0026amp; Travel\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size (L × W):\u003c\/strong\u003e 7-1\/2\" × 23\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Longitudinal Travel:\u003c\/strong\u003e 14\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Slots:\u003c\/strong\u003e 4 slots, 9\/16\" size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Slot Centers:\u003c\/strong\u003e 1-13\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing:\u003c\/strong\u003e 14-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Distance Spindle to Table:\u003c\/strong\u003e 14-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork Table Weight Capacity:\u003c\/strong\u003e 350 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eMachine\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColumn Diameter:\u003c\/strong\u003e 3-5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimensions:\u003c\/strong\u003e 12-1\/2\" × 19-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (L × W × H):\u003c\/strong\u003e 38\" × 37-1\/2\" × 42\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 370 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight:\u003c\/strong\u003e 457 lbs. (base machine)  varies by configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2-Year Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual:\u003c\/strong\u003e PDF download available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JET","offers":[{"title":"Base Machine","offer_id":43703601332290,"sku":"JT9-350017","price":3024.0,"currency_code":"USD","in_stock":true},{"title":"2-Axis DRO","offer_id":43703601365058,"sku":"JT9-350116","price":6302.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJMD-15BenchtopMillingMachinewithR-8Spindle-BaseMachine.jpg?v=1777853673"},{"product_id":"jet-jmd-18-benchtop-milling-machine-with-r-8-spindle","title":"JET JMD-18 Benchtop Milling Machine with R-8 Spindle","description":"\u003ch2 style=\"text-align: center;\"\u003eJET JMD-18 Benchtop Milling Machine with R-8 Spindle\u003c\/h2\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you trying to add milling capability to your shop without giving up a full machine footprint?\u003c\/p\u003e\n\u003cp\u003eWhat if you could drill, face mill, and work across two axes with a single machine that runs on standard shop power?\u003c\/p\u003e\n\u003cp\u003eMeet the JET JMD-18 Benchtop Milling Machine with R-8 Spindle, a belt-driven mill drill built for shops that need real milling capacity in a practical, space-saving package.\u003c\/p\u003e\n\u003cp\u003eWith the JMD-18, you get a 2 HP motor, 12 spindle speeds from 150 to 3,000 RPM, a large work table, and an R-8 spindle taper that accepts a wide range of standard tooling.\u003c\/p\u003e\n\u003cp\u003eWhen you need a machine that handles both drilling and light milling work without taking over your shop, the JMD-18 gives you the capability to get it done.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv data-id=\"vzZX8qzRTgY\" class=\"youtube-player\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JMD-18 for Benchtop Drilling and Light Milling Work\u003c\/h3\u003e\n\u003ch4 style=\"text-align: left;\"\u003eOne-Piece Cast Iron Column Holds Alignment Under Load\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe one-piece cast iron column gives the machine a stable core that resists flex during milling passes. When you are working across the full table travel, that rigidity keeps your cuts consistent from start to finish. It also supports the 360-degree head swivel without introducing play into the setup.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eR-8 Spindle Taper Accepts Standard Shop Tooling\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe R-8 spindle taper is one of the most common standards in benchtop milling. It gives you access to a wide range of collets, end mills, and arbors without sourcing specialty tooling. The locking collet holds the cutting tool firmly against lateral forces so the tool stays put during milling cuts.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003e12-Speed Belt Drive Matches RPM to the Job\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eTwelve spindle speeds from 150 to 3,000 RPM let you dial in the right cutting speed for the material and tool in use. Slower speeds handle face milling and larger cutters. Higher speeds work for drilling and smaller end mills. Forward and reverse switching gives you added flexibility at the spindle.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eLarge Table with Full Two-Axis Travel Keeps Work Moving\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe work table with 20-1\/2\" of longitudinal travel gives you room to work on larger parts without repositioning. Four T-slots at 5\/8\" with 1-13\/16\" centers let you clamp a wide range of fixtures and workholding setups. The table carries up to 400 lbs., so heavier stock stays secure throughout the operation.\u003c\/p\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-18_Benchtop_Milling_Machine_with_R-8_Spindle-2-Axis_DRO_X-Axis_Powerfeed_480x480.jpg?v=1777860389\" alt=\"JET JMD-18 Benchtop Milling Machine with R-8 Spindle\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJMD-18BenchtopMillingMachinewithR-8Spindle-BaseMachine_480x480.jpg?v=1777860108\" alt=\"JET JMD-18 Benchtop Milling Machine with R-8 Spindle\"\u003e\n\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJMD-18BenchtopMillingMachinewithR-8Spindle-BaseMachine_1_480x480.jpg?v=1777860108\" alt=\"JET JMD-18 Benchtop Milling Machine with R-8 Spindle\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJMD-18BenchtopMillingMachinewithR-8Spindle-BaseMachine_2_480x480.jpg?v=1777860108\" alt=\"JET JMD-18 Benchtop Milling Machine with R-8 Spindle\"\u003e\n\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? JET JMD-18 Benchtop Milling Machine with R-8 Spindle\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/2\" Drill Chuck and Chuck Arbor\u003c\/strong\u003e — Mounts directly to the R-8 spindle for standard drilling operations right out of the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Carbide Facemill\u003c\/strong\u003e — Allows face milling passes on flat stock with the included cutter already installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JMD-18 Benchtop Milling Machine with R-8 Spindle Specifications\u003c\/h3\u003e\n\u003ch4 style=\"text-align: center;\"\u003eAvailable Configurations\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-350018\u003c\/strong\u003e — JMD-18 | 115\/230V, 1-Phase | R-8 Spindle Taper | Base Machine | Table: 9-1\/2\" × 32-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-350119\u003c\/strong\u003e — JMD-18 | 115\/230V, 1-Phase | R-8 Spindle Taper | X-Axis Table Powerfeed | Table: 9-1\/2\" × 32-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-350401\u003c\/strong\u003e — JMD-18 | 115\/230V, 1-Phase | R-8 Spindle Taper | ACU-RITE 203 DRO | Table: 9-1\/2\" × 31-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-350134\u003c\/strong\u003e — JMD-18 | 115\/230V, 1-Phase | R-8 Spindle Taper | Newall DP500 DRO and X-Axis Table Powerfeed | Table: 9-1\/2\" × 32-1\/4\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003ePower \u0026amp; Spindle\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2 HP, 115\/230V, 1-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e R-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Spindle Speeds:\u003c\/strong\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange of Spindle Speeds:\u003c\/strong\u003e 150–3,000 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill Diameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Mill Capacity:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eTable \u0026amp; Travel\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Longitudinal Travel:\u003c\/strong\u003e 20-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Slots:\u003c\/strong\u003e 4 slots, 5\/8\" size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Slot Centers:\u003c\/strong\u003e 1-13\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing:\u003c\/strong\u003e 15-7\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Distance Spindle to Table:\u003c\/strong\u003e 17-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork Table Weight Capacity:\u003c\/strong\u003e 400 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eMachine\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColumn Diameter:\u003c\/strong\u003e 4-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimensions:\u003c\/strong\u003e 15-3\/4\" × 23-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (L × W × H):\u003c\/strong\u003e 47\" × 40\" × 51\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 595 lbs. (base machine) — varies by configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight:\u003c\/strong\u003e 682 lbs. (base machine) — varies by configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2-Year Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual:\u003c\/strong\u003e PDF download available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JET","offers":[{"title":"Base Machine","offer_id":43703633674306,"sku":"JT9-350018","price":3871.0,"currency_code":"USD","in_stock":true},{"title":"X-Axis Powerfeed","offer_id":43703633707074,"sku":"JT9-350119","price":5796.0,"currency_code":"USD","in_stock":true},{"title":"2-Axis DRO","offer_id":43703633739842,"sku":"JT9-350401","price":7424.0,"currency_code":"USD","in_stock":true},{"title":"2-Axis DRO + X-Axis Powerfeed","offer_id":43703633772610,"sku":"JT9-350134","price":7699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJMD-18BenchtopMillingMachinewithR-8Spindle-BaseMachine_3.jpg?v=1777860108"},{"product_id":"jet-jmd-18pfn-benchtop-milling-machine-with-power-downfeed","title":"JET JMD-18PFN Benchtop Milling Machine with Power Downfeed","description":"\u003ch2 style=\"text-align: center;\"\u003eJET JMD-18PFN Benchtop Milling Machine with Power Downfeed\u003c\/h2\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you spending more time fighting your equipment than finishing your parts?\u003c\/p\u003e\n\u003cp\u003eWhat if your benchtop mill gave you consistent depth control and a stable platform for every operation, without taking up the floor space of a full-size machine?\u003c\/p\u003e\n\u003cp\u003eMeet the JET JMD-18PFN Benchtop Milling Machine with Power Downfeed, a belt-drive mill drill built for light machining work in shops where space and budget both matter.\u003c\/p\u003e\n\u003cp\u003eWith the JET JMD-18PFN, you get a one-piece cast iron column, a 2 HP motor with 12 selectable spindle speeds, and a heavy-duty power downfeed that takes the guesswork out of repeatable depth cuts.\u003c\/p\u003e\n\u003cp\u003eWhen you have a machine that holds position and feeds at a controlled rate, you can focus on the work instead of the setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"youtube-player\" data-id=\"vzZX8qzRTgY\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JMD-18PFN for Light Milling, Drilling, and Benchtop Metalwork\u003c\/h3\u003e\n\u003ch4 style=\"text-align: left;\"\u003eOne-Piece Cast Iron Column Holds the Head in Place\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe column is cast in one piece, which reduces flex under load. When you are taking a milling pass or drilling into steel, a rigid column keeps the head from shifting and lets you hold tighter tolerances. The 4-1\/2\" diameter gives the machine a stable base for everyday shop use.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003ePower Downfeed Delivers Consistent Depth on Every Pass\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe heavy-duty power downfeed moves the quill at a controlled rate so you are not hand-feeding through the cut. Three selectable feed rates give you the flexibility to match feed to material and operation. The positive quick-stop knob lets you set a repeatable depth limit without rechecking between holes.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003e12-Speed Belt Drive Matches the Spindle to the Material\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe belt-drive head gives you 12 spindle speeds from 150 to 3,000 RPM. That range covers a wide variety of tooling and materials, from large-diameter face milling at low speed to small-diameter drilling at higher speed. The R-8 spindle taper is a standard that keeps your existing tooling compatible.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003e9-1\/2\" x 31-3\/4\" Table Handles Common Workpiece Sizes\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe table gives you 20-1\/2\" of longitudinal travel and holds up to 400 lbs. Four T-slots at 5\/8\" keep fixtures and vises in place without extra prep. The 360-degree head swivel lets you angle the spindle when the work calls for it.\u003c\/p\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJMD-18PFNBenchtopMillingMachinewithPowerDownfeed-BaseMachine_480x480.jpg?v=1777882343\" alt=\"JET JMD-18PFN Benchtop Milling Machine with Power Downfeed\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-18PFN_Benchtop_Milling_Machine_with_Power_Downfeed-2-Axis_DRO_X-Axis_Powerfeed_1_480x480.jpg?v=1777884487\" alt=\"JET JMD-18PFN Benchtop Milling Machine with Power Downfeed\"\u003e\n\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-18PFN_Benchtop_Milling_Machine_with_Power_Downfeed-2-Axis_DRO_X-Axis_Powerfeed_2_480x480.jpg?v=1777884486\" alt=\"JET JMD-18PFN Benchtop Milling Machine with Power Downfeed\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-18PFN_Benchtop_Milling_Machine_with_Power_Downfeed-2-Axis_DRO_480x480.jpg?v=1777882761\" alt=\"JET JMD-18PFN Benchtop Milling Machine with Power Downfeed\"\u003e\n\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? JET JMD-18PFN Benchtop Milling Machine with Power Downfeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/2\" Drill Chuck and Chuck Arbor\u003c\/strong\u003e — Mounts directly to the R-8 spindle for standard drilling operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Carbide Facemill\u003c\/strong\u003e — Handles face milling operations up to 3\" wide right out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JMD-18PFN Benchtop Milling Machine with Power Downfeed Specifications\u003c\/h3\u003e\n\u003ch4 style=\"text-align: center;\"\u003eAvailable Configurations\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-350020\u003c\/strong\u003e — JMD-18PFN | 115\/230V, 1-Phase, Prewired 115V | R-8 Spindle | Power Downfeed | Base Dimensions: 15-3\/4\" × 23-3\/4\" | Table: 9-1\/2\" × 31-3\/4\" | Net Weight: 649 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-350140\u003c\/strong\u003e — JMD-18PFN | 115\/230V, 1-Phase, Prewired 115V | R-8 Spindle | X-Axis Table Powerfeed | Table: 9-1\/2\" × 31-3\/4\" | Net Weight: 649 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-350402\u003c\/strong\u003e — JMD-18PFN | 230V Only, 1-Phase | R-8 Spindle | Power Downfeed | ACU-RITE 203 DRO | Base Dimensions: 15-3\/4\" × 23-3\/4\" | Table: 9-1\/2\" × 31-3\/4\" | Net Weight: 739 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-350120\u003c\/strong\u003e — JMD-18PFN | 115\/230V, 1-Phase, Prewired 115V | R-8 Spindle | X-Axis Table Powerfeed | ACU-RITE 203 DRO | Table: 9-1\/2\" × 32-1\/4\" | Net Weight: 660 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003ePower \u0026amp; Spindle\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2 HP, 115\/230V, 1-Phase (230V only on JT9-350402)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e R-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Spindle Speeds:\u003c\/strong\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange of Spindle Speeds:\u003c\/strong\u003e 150–3,000 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Travel Auto (Power Downfeed):\u003c\/strong\u003e 4-1\/4\" (JT9-350020 and JT9-350402)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill Diameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill Down Feed Rates:\u003c\/strong\u003e 0.0047, 0.007, 0.001 IPR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Mill Capacity:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eTable \u0026amp; Travel\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Longitudinal Travel:\u003c\/strong\u003e 20-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e 9-1\/2\" × 31-3\/4\" (JT9-350020, JT9-350140, JT9-350402) | 9-1\/2\" × 32-1\/4\" (JT9-350120)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Slots:\u003c\/strong\u003e 4 slots, 5\/8\" size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Slot Centers:\u003c\/strong\u003e 1-13\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing:\u003c\/strong\u003e 15-7\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Distance Spindle to Table:\u003c\/strong\u003e 28\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork Table Weight Capacity:\u003c\/strong\u003e 400 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eMachine\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColumn Diameter:\u003c\/strong\u003e 4-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimensions:\u003c\/strong\u003e 15-3\/4\" × 23-3\/4\" (where listed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (L × W × H):\u003c\/strong\u003e 47\" × 40\" × 51\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 649 lbs. (JT9-350020) | 649 lbs. (JT9-350140) | 739 lbs. (JT9-350402) | 660 lbs. (JT9-350120)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight:\u003c\/strong\u003e 740 lbs. (JT9-350020) | 740 lbs. (JT9-350140) | 805 lbs. (JT9-350402) | 847 lbs. (JT9-350120)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2-Year Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual:\u003c\/strong\u003e PDF download available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JET","offers":[{"title":"Base Machine","offer_id":43703956832322,"sku":"JT9-350020","price":5059.0,"currency_code":"USD","in_stock":true},{"title":"X-Axis Powerfeed","offer_id":43703956865090,"sku":"JT9-350140","price":6159.0,"currency_code":"USD","in_stock":true},{"title":"2-Axis DRO","offer_id":43703956897858,"sku":"JT9-350402","price":8249.0,"currency_code":"USD","in_stock":true},{"title":"2-Axis DRO + X-Axis Powerfeed","offer_id":43703956930626,"sku":"JT9-350120","price":9789.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-18PFN_Benchtop_Milling_Machine_with_Power_Downfeed-Base_Machine.jpg?v=1777882352"},{"product_id":"jet-jmd-40gh-geared-head-benchtop-milling-machine","title":"JET JMD-40GH Geared Head Benchtop Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eJET JMD-40GH Geared Head Benchtop Milling Machine\u003c\/h2\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you struggling to get consistent, accurate results from a mill drill that lacks real power delivery and repeatable speed control?\u003c\/p\u003e\n\u003cp\u003eWhat if you could set your spindle speed with confidence, dial in your depth, and work through metal with steady, predictable cuts every time?\u003c\/p\u003e\n\u003cp\u003eMeet the JET JMD-40GH Geared Head Benchtop Milling Machine, a round column mill drill built for shops that need reliable drilling and milling performance without moving to a full-size knee mill.\u003c\/p\u003e\n\u003cp\u003eWith the JMD-40GH, you get a 6-speed geared head that delivers full power to your cutting tools across a wide RPM range, an R-8 spindle that accepts standard mill tooling, and a calibrated fine downfeed with an internal depth gauge for controlled, repeatable work.\u003c\/p\u003e\n\u003cp\u003eWhen you need a benchtop machine that holds up to daily shop use and gives you the same result from the first cut to the last, the JMD-40GH is built to meet that standard.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"youtube-player\" data-id=\"6h8QqSclyz0\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JMD-40GH for Precise Benchtop Drilling and Milling\u003c\/h3\u003e\n\u003ch4 style=\"text-align: left;\"\u003e6-Speed Geared Head Delivers Full Cutting Power\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe geared head on the JMD-40GH transfers power directly to the spindle without the slippage you can get from a belt-drive system. Six speed settings cover a range from 65 to 1,550 RPM, and quick-select gear shift levers let you move between speeds without tools or guesswork. You get the right speed for face milling, drilling, or light contouring work without fighting the machine to get there.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eR-8 Spindle Accepts Standard Mill Tooling\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe R-8 spindle taper is one of the most widely used standards in hobby and light industrial milling. It gives you access to a full range of collets, end mill holders, drill chucks, and face mill arbors without needing special adapters. With 5 inches of spindle travel and a 3-inch quill diameter, you have the reach and rigidity to handle most benchtop milling and drilling tasks cleanly.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eCalibrated Fine Downfeed Controls Depth Consistently\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe built-in calibrated fine downfeed gives you precise control over how much material you remove with each pass. The internal depth gauge is easy to read at the machine, so you can confirm your depth setting without stopping to measure. This combination keeps your work accurate and reduces the chance of taking too much material on a finishing cut.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eMilling Table Provides Solid Workholding Range\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe milling table gives you 20-1\/2 inches of longitudinal travel and accepts standard T-slot fixturing. A 21-inch swing and up to 15-3\/4 inches of spindle-to-table clearance give you room to work with a variety of part sizes. The heavy-duty column and base keep the machine stable during cuts, so your setups stay where you put them.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-40GH_Geared_Head_Benchtop_Milling_Machine-2-Axis_DRO_X-Axis_Powerfeed_480x480.jpg?v=1777900307\" alt=\"JET JMD-40GH Geared Head Benchtop Milling Machine\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-40GH_Geared_Head_Benchtop_Milling_Machine-2-Axis_DRO_1_480x480.jpg?v=1777900042\" alt=\"JET JMD-40GH Geared Head Benchtop Milling Machine\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-40GH_Geared_Head_Benchtop_Milling_Machine-2-Axis_DRO_4_480x480.jpg?v=1777900042\" alt=\"JET JMD-40GH Geared Head Benchtop Milling Machine\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJMD-40GHGearedHeadBenchtopMillingMachine-BaseMachine_480x480.jpg?v=1777898152\" alt=\"JET JMD-40GH Geared Head Benchtop Milling Machine\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? JET JMD-40GH Geared Head Benchtop Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJET JMD-40GH Geared Head Benchtop Milling Machine\u003c\/strong\u003e — The base machine with geared head, R-8 spindle, calibrated fine downfeed, internal depth gauge, and milling table ready for shop use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual\u003c\/strong\u003e — PDF download available from JET for setup, operation, and maintenance reference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JMD-40GH Geared Head Benchtop Milling Machine Specifications\u003c\/h3\u003e\n\u003ch4 style=\"text-align: center;\"\u003eAvailable Configurations\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-351040\u003c\/strong\u003e — JMD-40GH | 115\/230V, 1-Phase | R-8 Spindle | Calibrated Fine Downfeed | Net Weight: 628 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-351041\u003c\/strong\u003e — JMD-40GHPF | 115\/230V, 1-Phase | R-8 Spindle | Power Downfeed Standard | Table: 8-1\/4\" × 28-3\/4\" | Net Weight: 655 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-351140\u003c\/strong\u003e — JMD-40GH | 115\/230V, 1-Phase | R-8 Spindle | Newall DP700 DRO | Net Weight: 628 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-351141\u003c\/strong\u003e — JMD-40GHPF | 115\/230V, 1-Phase | R-8 Spindle | Power Downfeed | Newall DP700 2-Axis DRO | X-Axis Powerfeed | Table: 8-1\/4\" × 28-3\/4\" | Net Weight: 628 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003ePower \u0026amp; Spindle\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1-1\/2 HP, 115\/230V, 1-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e R-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Spindle Speeds:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange of Spindle Speeds:\u003c\/strong\u003e 65, 130, 220, 480, 925, 1,550 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Travel Auto (Power Downfeed):\u003c\/strong\u003e 4-1\/2\" (JT9-351041 and JT9-351141)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill Diameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Mill Capacity:\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eTable \u0026amp; Travel\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Longitudinal Travel:\u003c\/strong\u003e 20-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e 8-1\/4\" × 28-3\/4\" (JT9-351041 and JT9-351141)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing:\u003c\/strong\u003e 21\" (JT9-351040, JT9-351041, JT9-351141) | 20-1\/2\" (JT9-351140)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Distance Spindle to Table:\u003c\/strong\u003e 15-3\/4\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eMachine\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColumn Diameter:\u003c\/strong\u003e 4-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimensions:\u003c\/strong\u003e 24-1\/4\" × 15-15\/16\" (JT9-351041 and JT9-351141)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (L × W × H):\u003c\/strong\u003e 28\" × 39-1\/4\" × 42-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 628 lbs. (JT9-351040, JT9-351140, JT9-351141) | 655 lbs. (JT9-351041)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight:\u003c\/strong\u003e 694 lbs. (JT9-351040, JT9-351140, JT9-351141) | 721 lbs. (JT9-351041)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2-Year Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProp 65:\u003c\/strong\u003e Cancer and Reproductive Harm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual:\u003c\/strong\u003e PDF download available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JET","offers":[{"title":"Base Machine","offer_id":43705775521858,"sku":"JT9-351040","price":5741.0,"currency_code":"USD","in_stock":true},{"title":"Power Downfeed","offer_id":43705775554626,"sku":"JT9-351041","price":7072.0,"currency_code":"USD","in_stock":true},{"title":"2-Axis DRO","offer_id":43705775587394,"sku":"JT9-351140","price":10119.0,"currency_code":"USD","in_stock":true},{"title":"2-Axis DRO + X-Axis Powerfeed","offer_id":43705775620162,"sku":"JT9-351141","price":11329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JETJMD-40GHGearedHeadBenchtopMillingMachine-BaseMachine.jpg?v=1777898152"},{"product_id":"jet-jmd-45gh-square-column-benchtop-milling-machine","title":"JET JMD-45GH Square Column Benchtop Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eJET JMD-45GH Square Column Benchtop Milling Machine\u003c\/h2\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you working around the limits of a drill press that can't hold position when a cut pushes it sideways?\u003c\/p\u003e\n\u003cp\u003eWhat if your benchtop machine could move between drilling and milling operations without losing accuracy or requiring you to reset the head?\u003c\/p\u003e\n\u003cp\u003eMeet the JET JMD-45GH Square Column Benchtop Milling Machine, a geared head mill drill designed for shops that need dependable performance from a machine that fits a benchtop footprint.\u003c\/p\u003e\n\u003cp\u003eWith the JMD-45GH, the square column with dovetail ways keeps the head locked in position, and the six-speed geared head puts full power to the cutting tool across a speed range that covers most drilling and milling work.\u003c\/p\u003e\n\u003cp\u003eWhen your benchtop machine holds its setup and shifts between operations without drama, you move through your work list with fewer interruptions and better results.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"youtube-player\" data-id=\"6h8QqSclyz0\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JMD-45GH for Drilling and Milling on the Benchtop\u003c\/h3\u003e\n\u003ch4\u003eSquare Column with Dovetail Ways Keeps the Head from Shifting\u003c\/h4\u003e\n\u003cp\u003eA round column mill drill allows the head to rotate when you raise or lower it, which means you lose your X-Y position every time you adjust. The square column on the JMD-45GH uses dovetail ways to hold the head in place through the full range of vertical travel. Your layout stays where you set it, and you don't have to re-indicate after adjustments.\u003c\/p\u003e\n\u003ch4\u003eSix-Speed Geared Head Transfers Full Motor Power to the Cutter\u003c\/h4\u003e\n\u003cp\u003eThe geared head connects the motor directly to the spindle through a gear train, so you get the full 1-1\/2 HP at the cutter regardless of which speed you select. Quick-select gear shift levers let you move between the six speeds without tools. The 65 to 1550 RPM range gives you the low end for large diameter work and the high end for smaller tooling in softer material.\u003c\/p\u003e\n\u003ch4\u003eR8 Spindle Opens the Machine to Standard Mill Tooling\u003c\/h4\u003e\n\u003cp\u003eThe R8 taper is the most common spindle standard in benchtop milling, and the JMD-45GH is built around it. Collets, end mill holders, and shell mill arbors in R8 fit without modification. The 3-inch quill diameter and 5 inches of spindle travel give you the reach to handle deeper drilling operations without repositioning the table.\u003c\/p\u003e\n\u003ch4\u003eCalibrated Fine Down Feed and Internal Depth Gauge Support Consistent Drilling Depth\u003c\/h4\u003e\n\u003cp\u003eThe built-in calibrated fine down feed gives you controlled quill movement for drilling work where depth consistency matters. The internal depth gauge reads without stopping to consult a separate indicator. Both systems work together so your hole depths stay repeatable across a run of parts.\u003c\/p\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-45GH_Square_Column_Benchtop_Milling_Machine-2-Axis_DRO_480x480.jpg?v=1777906790\" alt=\"JET JMD-45GH Square Column Benchtop Milling Machine\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-45GH_Square_Column_Benchtop_Milling_Machine-Base_Machine_2_480x480.jpg?v=1777905720\" alt=\"JET JMD-45GH Square Column Benchtop Milling Machine\"\u003e\n\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-45GH_Square_Column_Benchtop_Milling_Machine-2-Axis_DRO_2_480x480.jpg?v=1777906790\" alt=\"JET JMD-45GH Square Column Benchtop Milling Machine\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-45GH_Square_Column_Benchtop_Milling_Machine-Power_Downfeed_3_480x480.jpg?v=1777906428\" alt=\"JET JMD-45GH Square Column Benchtop Milling Machine\"\u003e\n\u003c\/div\u003e\n\u003cbr style=\"clear:both;\"\u003e\n\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? JET JMD-45GH Square Column Benchtop Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJET JMD-45GH Geared Head Square Column Mill\/Drill\u003c\/strong\u003e — the main machine unit ready for benchtop installation and use with standard R8 tooling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JMD-45GH Square Column Benchtop Milling Machine Specifications\u003c\/h3\u003e\n\u003ch4 style=\"text-align: center;\"\u003eAvailable Configurations\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-351045\u003c\/strong\u003e — JMD-45GH | 115\/230V, 1-Phase | R8 Spindle | Calibrated Fine Downfeed | Net Weight: 727 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-351046\u003c\/strong\u003e — JMD-45GHPF | 115\/230V, 1-Phase | R8 Spindle | Power Downfeed Standard | Net Weight: 754 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-351150\u003c\/strong\u003e — JMD-45GH | 115\/230V, 1-Phase | R8 Spindle | Newall DP700 2-Axis DRO | Net Weight: 728 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJT9-351151\u003c\/strong\u003e — JMD-45GH | 115\/230V, 1-Phase | R8 Spindle | Newall DP700 2-Axis DRO | X-Axis Powerfeed | Net Weight: 728 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003ePower \u0026amp; Spindle\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1-1\/2 HP, 115\/230V, 1-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Taper:\u003c\/strong\u003e R8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Spindle Speeds:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange of Spindle Speeds:\u003c\/strong\u003e 65–1,550 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill Diameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Mill Capacity:\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eTable \u0026amp; Travel\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size (L x W):\u003c\/strong\u003e 9-1\/2\" × 32-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Longitudinal Travel:\u003c\/strong\u003e 20-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing:\u003c\/strong\u003e 19-11\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Distance Spindle to Table:\u003c\/strong\u003e 18-1\/8\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eMachine\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Dimensions:\u003c\/strong\u003e 26-11\/16\" × 15-15\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions (L × W × H):\u003c\/strong\u003e 29\" × 36\" × 50\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 727 lbs. (JT9-351045) | 754 lbs. (JT9-351046) | 728 lbs. (JT9-351150, JT9-351151)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight:\u003c\/strong\u003e 794 lbs. (JT9-351045, JT9-351150, JT9-351151) | 820 lbs. (JT9-351046)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2-Year Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CSA\/CUS Certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProp 65:\u003c\/strong\u003e Cancer and Reproductive Harm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual:\u003c\/strong\u003e PDF download available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JET","offers":[{"title":"Base Machine","offer_id":43705968132162,"sku":"JT9-351045","price":8139.0,"currency_code":"USD","in_stock":true},{"title":"Power Downfeed","offer_id":43705968164930,"sku":"JT9-351046","price":9019.0,"currency_code":"USD","in_stock":true},{"title":"2-Axis DRO","offer_id":43705968197698,"sku":"JT9-351150","price":13089.0,"currency_code":"USD","in_stock":true},{"title":"2-Axis DRO + X-Axis Powerfeed","offer_id":43705968230466,"sku":"JT9-351151","price":13089.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-45GH_Square_Column_Benchtop_Milling_Machine-Base_Machine_1.jpg?v=1777905720"},{"product_id":"jet-jmd-45vspf-variable-speed-square-column-benchtop-milling-machine","title":"JET JMD-45VSPF Variable Speed Square Column Benchtop Milling Machine","description":"\u003ch2 style=\"text-align: center;\"\u003eJET JMD-45VSPF Variable Speed Square Column Benchtop Milling Machine\u003c\/h2\u003e\n\u003cdiv class=\"one-half-column-left\"\u003e\n\u003cp\u003eAre you looking for a benchtop mill drill that holds tight tolerances through a full day of precision work?\u003c\/p\u003e\n\u003cp\u003eWhat if your shop had a variable speed mill drill that stays rigid through face milling, drilling, and light contouring without constant adjustment?\u003c\/p\u003e\n\u003cp\u003eMeet the JET JMD-45VSPF Variable Speed Square Column Benchtop Milling Machine, a geared head mill drill built for accurate metalworking in demanding shop environments.\u003c\/p\u003e\n\u003cp\u003eAvailable as a base model, with a Newall DP700 2-axis DRO, or with a DRO and X-axis powerfeed, the JMD-45VSPF fits a range of shop setups and workflow demands.\u003c\/p\u003e\n\u003cp\u003eWhen the column holds square and the spindle tracks true, you can focus on the work instead of correcting for machine drift.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-column-right\"\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"youtube-player\" data-id=\"6h8QqSclyz0\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JMD-45VSPF for Precise Drilling and Milling Work\u003c\/h3\u003e\n\u003ch4 style=\"text-align: left;\"\u003eSquare Column with Dovetail Ways Holds Position Through Cuts\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe square column and dovetail ways keep the head from rotating during use, which is a common problem with round column mill drills. That rigidity translates directly to more consistent results when drilling, facing, or making repeated passes across a part.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eVariable Speed Geared Head Delivers Full Power Across the Range\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eQuick-select gear shift levers let you change spindle speeds without stopping to swap pulleys. The variable speed range runs from 50 to 2500 RPM, giving you the right speed for everything from large face mills down to small diameter end mills.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eR8 Spindle Accepts Standard Mill Tooling\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe R8 taper is the most common spindle standard in hobby and light production shops, so your existing collets, end mill holders, and tooling will transfer directly. The internal depth gauge gives you a readable reference when drilling to a set depth.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eOptional Newall DP700 DRO Adds Precise Position Readout\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe Newall DP700 2-axis DRO is available as an optional upgrade and gives you a live digital readout of table position on both axes. It eliminates the need to count dial revolutions and makes repeating a move or hitting a target dimension more straightforward.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eOptional X-Axis Powerfeed Automates Table Movement\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eThe X-axis powerfeed is available on the top configuration and drives the table at a consistent feed rate without hand cranking. It is particularly useful when face milling or making long passes where a steady, hands-free feed produces a cleaner surface finish.\u003c\/p\u003e\n\n\u003cdiv class=\"one-third-column\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-45VSPF_Variable_Speed_Square_Column_Benchtop_Milling_Machine_1_480x480.jpg?v=1782112556\" alt=\"JET JMD-45VSPF Variable Speed Square Column Benchtop Milling Machine\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"one-third-column\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-45VSPF_Variable_Speed_Square_Column_Benchtop_Milling_Machine_7ab32816-87c0-465d-941a-067a36f58ebf_480x480.jpg?v=1782112556\" alt=\"JET JMD-45VSPF Variable Speed Square Column Benchtop Milling Machine\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"one-third-column-last\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-45VSPF_Variable_Speed_Square_Column_Benchtop_Milling_Machine_2_480x480.jpg?v=1782112556\" alt=\"JET JMD-45VSPF Variable Speed Square Column Benchtop Milling Machine\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr style=\"clear: both;\"\u003e\u003c\/p\u003e\n\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat's Included? JET JMD-45VSPF Variable Speed Square Column Benchtop Milling Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJET JMD-45VSPF Milling Machine\u003c\/strong\u003e — Provides a rigid variable speed mill drill platform for precision drilling and milling work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNewall DP700 2-Axis DRO\u003c\/strong\u003e — Included with DRO and DRO + Powerfeed configurations. Provides live digital position readout on both table axes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eX-Axis Powerfeed\u003c\/strong\u003e — Included with the DRO + Powerfeed configuration only. Drives the table at a consistent feed rate during milling passes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003ch3 style=\"text-align: center;\"\u003eJET JMD-45VSPF Variable Speed Square Column Benchtop Milling Machine Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: JMD-45VSPF\u003c\/li\u003e\n\u003cli\u003eMotor: 1-1\/2 HP, 115\/230V, 1 Phase\u003c\/li\u003e\n\u003cli\u003eRange of Spindle Speeds: 50–2500 RPM\u003c\/li\u003e\n\u003cli\u003eSpindle Taper: R8\u003c\/li\u003e\n\u003cli\u003eQuill Diameter: 3 in\u003c\/li\u003e\n\u003cli\u003eSpindle Travel (Auto): 4-1\/4 in\u003c\/li\u003e\n\u003cli\u003eFace Mill Capacity: 4 in\u003c\/li\u003e\n\u003cli\u003eSwing: 19-11\/16 in\u003c\/li\u003e\n\u003cli\u003eMax Distance Spindle to Table: 18-1\/8 in\u003c\/li\u003e\n\u003cli\u003eTable Size: 9-1\/2 in x 32-1\/4 in\u003c\/li\u003e\n\u003cli\u003eTable Longitudinal Travel: 20-1\/2 in\u003c\/li\u003e\n\u003cli\u003eTable Cross Travel: 8-1\/4 in\u003c\/li\u003e\n\u003cli\u003eBase Dimensions: 26-11\/16 in x 15-15\/16 in\u003c\/li\u003e\n\u003cli\u003eOverall Dimensions (L x W x H): 29 in x 36 in x 50 in\u003c\/li\u003e\n\u003cli\u003eNet Weight: 761 lb (base) \/ 754 lb (DRO and DRO + Powerfeed configurations)\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 Year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\"\u003eSpecs by Configuration\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBase Model (JT9-351050) — No DRO, No Powerfeed. Spindle Travel (Manual): not confirmed in available data.\u003c\/li\u003e\n\u003cli\u003eWith Newall DP700 2-Axis DRO (JT9-351154) — DRO included, No Powerfeed. Spindle Travel (Manual): 5 in.\u003c\/li\u003e\n\u003cli\u003eWith Newall DP700 2-Axis DRO \u0026amp; X-Axis Powerfeed (JT9-351155) — DRO included, X-Axis Powerfeed included. Spindle Travel (Manual): 5 in.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JET","offers":[{"title":"Base Machine","offer_id":43706050084930,"sku":"JT9-351050","price":9569.0,"currency_code":"USD","in_stock":true},{"title":"2-Axis DRO","offer_id":43706050117698,"sku":"JT9-351154","price":13089.0,"currency_code":"USD","in_stock":true},{"title":"2-Axis DRO + X-Axis Powerfeed","offer_id":43706050150466,"sku":"JT9-351155","price":14189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/files\/JET_JMD-45VSPF_Variable_Speed_Square_Column_Benchtop_Milling_Machine-_1_9978cba5-f98f-4424-b157-38710405cf80.jpg?v=1777915603"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1188\/6562\/collections\/JET_JTM-1254VS_12_x_54_Variable_Speed_Vertical_Milling_Machine-3-Axis_DRO_X_Y_Z_Powerfeeds_2.jpg?v=1783431675","url":"https:\/\/www.advmachinery.com\/collections\/milling-machines.oembed","provider":"Advanced Machinery","version":"1.0","type":"link"}