Login

Sawdust Management System
 Previous  Up  Next" 
Dust Removal Attachment


Dust Removal Attachment
NEW! HEGNER Sawdust Management System gives you the following advantages:
  • Can be positioned at user’s discretion to adapt perfectly to any material thickness.
  • Can be set to blow air in any desired direction.
  • Can be converted from blower to dust extractor (and back) with use of a shop vac in seconds.
  • Can be used as a combination blower/extractor.
How does it work? The blue segmented articulating tube can be positioned precisely and set to either blow air when the plastic tube is connected to the bellows or draw air when the plastic tube is connected to the red funnel which in turn is then connected to a dust extraction devise such as a shop vac. The funnel also serves to draw the sawdust which falls out under the saw.

Options:

Quantity:   




QuickClamp for Hegner Scroll Saws
Use instead of upper blade clamp and align your blade instantly. Positive stop puts blade in same position every time, and easy-grip knob places pressure directly on the blade for slip-free tightening.
Click here for more information...
Blade Clamps
Available in three sizes. SOLD BY THE PAIR.
Choose 0.5mm for sawblades size 5 or smaller.
Choose 0.7mm for sawblades size 5 thru 9.
Choose 1.0mm for sawblades size 9 or larger.
Click here for more information...
Reverse Skip Tooth Scroll Saw Blades
These blades have the same performance characteristics as Olson Skip Tooth Blades with the added benefit of reverse teeth at the bottom for a smooth, splinter free finish on top and bottom.

Item Application TPI Width Thickness
FR440R For smooth, splinter free finish on top and bottom sides. Excellent for hard/soft wood, plywood, etc. of 1/4" or more. 28/21 REV .026 .011
FR443R 20/14 REV .029 .012
FR446R 12.5/9 REV .038 .016
FR448R 11.5/8 REV .047 .017
FR450R 11.5/8 REV .054 .019
FR453R 9.5/6 REV .062 .024
FR420R 9/5 REV .100 .022

Click here for more information...
Footswitch
Our most popular single accessory, the Advanced Machinery footswitch enhances safety and convenience.
  • Keep both hands on your work at all times.
  • Turn saw (or other equipment) on and off instantly simply by stepping on or off the pedal.
  • "Deadman" design turns current off the moment you step off the switch for maximum safety.
  • Durable steel construction.
  • Skid-resistant pads on both top and bottom for safe operation.
  • Rated for over one million operating cycles - effectively lasts a lifetime.
  • Generous 6' cord length
  • Plugs into any grounded wall outlet.
  • 10 amp/1/2 HP rating is suitable for all scroll saws, sharpening machines and a host of other shop equipment.
Click here for more information...