The jig for knife sharpening comprises an adjustable clamp (1) for holding knives of any thickness and an adjustable stop (2). You adjust the jig to the knife thickness with the screw (3) and lock by tightening the knob (4).
The jig rests on the Universal Support. The exact edge angle is set by rotating the stop or with the Micro Adjust on the Universal Support.
The Universal Support is normally placed vertically for knife sharpening towards the edge. Short knives can also be ground away from the edge with the Universal Support placed horizontally.
This jig is made especially for knives with thin, flexible blades. It works in the same way as the SVM-45 jig but it is wider and therefore gives more support to flexible blades.
The jig comprises an adjustable clamp (1) for holding knives of any thickness and an adjustable stop (2). You adjust the jig to the knife thickness with the screw (3). You lock the tool by tightening the knob (4).
The jig rests on the Universal Support. The exact edge angle is set by rotating the stop or with the Micro Adjust on the Universal Support. The Universal Support is placed vertically for grinding towards the edge.
The jig for scissors sharpening comprises a support plate (1) and a holder (2) with two clamps (3) for the scissors. Usually you use only the right clamp. For large scissors and garden shears you use both clamps.
You adjust the clamp to fit the scissors’ thickness with the screw (4). You lock the scissors by tightening the knob (5). The support plate has a sliding surface, so the holder with the scissors can easily be moved while it is pressed onto the plate.
THIS IS THE NEWEST IMPROVED VERSION OF THE T-7, which features a larger water tray for less spillage, EzyLock Stone Mounting for quick stone change without tools and ED-Coated Housing for maximum protection, and comes with the new 10-Year warranty.
The T-7 wet stone sharpening system is rated for continuous use and has a vast array of specialty jigs available so you can quickly and easily sharpen virtually any tool in your house, backyard shed or workshop.
The heart of the T-7 is the Tormek SG-250 10" x 2" grinding wheel turning at a slow 90 rpm through water. The water acts as a lubricant for faster grinding while it continuously cools the tool edge to prevent "bluing" the metal edges you are sharpening. After grinding, the genuine leather honing wheel gently removes the burr and hones the edge to razor sharpness.
Features of the Tormek T-7:
Durable drive wheel with proprietary rubber compound
Stainless steel main shaft with Ezylock for quick stone change
Acme threaded tool rest with micro adjustment
Square Edge Jig to sharpen chisels and plane blades more easily than ever
110 volt, 200W, 60Hz, 1.5 Amp Motor
37 lb weight
10 year warranty
Square Edge Jig SE-76
The exclusive SE-76 Square Edge Jig, included with the T-7, changes the task of grinding tools square from tricky to foolproof. It references from the flat side of the tool for unparalleled ease in tool mounting. It also has travel limit stops that prevent you from running the tool off the edge and scraping a knuckle.
YourCompany.com
E-mail this product to a friend
The jig for knife sharpening comprises an adjustable clamp (1) for holding knives of any thickness and an adjustable stop (2). You adjust the jig to the knife thickness with the screw (3) and lock by tightening the knob (4). 
This jig is made especially for knives with thin, flexible blades. It works in the same way as the SVM-45 jig but it is wider and therefore gives more support to flexible blades. 
The jig for scissors sharpening comprises a support plate (1) and a holder (2) with two clamps (3) for the scissors. Usually you use only the right clamp. For large scissors and garden shears you use both clamps. 
available so you can quickly and easily sharpen virtually any tool in your house, backyard shed or workshop. 
included with the T-7, changes the task of grinding tools square from tricky to foolproof. It references from the flat side of the tool for unparalleled ease in tool mounting. It also has travel limit stops that prevent you from running the tool off the edge and scraping a knuckle. 
