Login

Stone Grader
 Previous  Up  Next" 
Stone Grader


Stone Grader

The TORMEK Stone Grader is used to grade the Grindstone to a finer surface. For example, the TORMEK Grindstone has a normal grit rating of 220 with a grain size is 0.06 mm (0.0024"). Use the Stone grader to change to a 1000 grit suitable for fine finish grinding/sharpening

Use the other side of the grader to return the stone to its 220 grit.

The stone grader is also used for renewing a glazed stone.


Price: $27.50 


Quantity:   


E-mail this product to a friend E-mail this product to a friend




Honing Compound
Use this 6000 grit compound on your leather Honing Wheels.
Click here for more information...
DVD: Edge Tool Sharpening the TORMEK Way
23 minutes detailing the set-up and operation of each jig and attachment in the Tormek system. Chapter markers guide you to just the section you want to view when looking up a particular application. Included with each machine. Offered separately for owners who bought before the video was available or those who received the VHS and now want DVD, in case of loss, and for those of you who would like a look before you buy.
Click here for more information...
Tormek Square Edge Jig
The jig (1) comprises an upper base with a lower clamp and two locking knobs for fixing the tool. The jig slides on the Universal Support on nylon bushings across the grindstone. The edge angle is set with the Micro Adjust (4) on the Universal Support (5).

There are two safety stops to prevent the tool from slipping off the stone when grinding. One inner stop (2) to be positioned according to the width of the tool and one outer stop (3) mounted on the end of the Universal Support.

The jig automatically lines up the chisel to its upper, flat side so the tool always mounts correctly and grinds at 90°. Conventional jigs need manual alignment.

The lower clamp has a ridge in the centre enabling shorter tools with a tapered shank to be firmly mounted, e.g. Japanese chisels. The upper base, which lines up the tool, is designed so the clamping pressure is distributed to the ends and the tool mounts firmly without a heavy tightening of the knobs.

The jig is designed for grinding towards the edge with the Universal Support placed vertically and for honing away from the edge with the Universal Support placed horizontally.

The Square Edge Jig is included with the TORMEK T-7 and T-3 machine models.
Click here for more information...
Tormek Long Knife Jig
This jig is made especially for knives with thin, flexible blades. It works in the same way as the SVM-45 jig but it is wider and therefore gives more support to flexible blades.

The jig comprises an adjustable clamp (1) for holding knives of any thickness and an adjustable stop (2). You adjust the jig to the knife thickness with the screw (3). You lock the tool by tightening the knob (4).

The jig rests on the Universal Support. The exact edge angle is set by rotating the stop or with the Micro Adjust on the Universal Support. The Universal Support is placed vertically for grinding towards the edge.
Click here for more information...