Login

Wood Turner's Jig Kit 
Previous  Up  Next" 
SVD-185 Click for larger image
SVS-50 Click for larger image
TTS-100 Click for larger image
LA-120 Click for larger image
SVD-110 Click for larger image
Kit Box - Click for larger image
Kit Tray - Click for larger image
The Wood Turner's Kit contains these Tormek Jigs and Accessories packaged in a strong, dense foam tray for easy storage. The tray can either be screwed to the shop wall or be used as a drawer liner. Click on individual items to see detailed descriptions:
  • SVD-185 Gouge Jig - For fingernail shaped bowl gouges and spindle gouges. Can be set to create the edge geometry of your choice. Also for exchangeable cutters of any shape.
  • SVS-50 Multi Jig - For skew chisel with a straight or a curved edge. Can be set for any skew angle. Even for skews with oval section. Also for parting and beading tools and roughing gouges.
  • TTS-100 Turning Tool Setter - For instant setting of the geometries on gouges and skews when using the SVD-185 and the SVS-50 jigs. With built in edge geometries. Works on any stone diameter.
  • LA-120 Leather Honing Wheel - For honing and polishing the flute on gouges. With two exchangeable profiles. One with a 3 mm (1/8") radius and one with a 60° point.
  • SVD-110 Tool Rest - For scrapers, hollowing tools and thin parting tools. Secure locking on the Universal Support thanks to the patented design.
  • MH-380 Dust Cover - For protecting the machine from shavings and wood dust.
  • TNT-300 Woodturner's Instruction Box - 1 hour and 20 minutes comprehensive DVD made by Jeff Farris and a detailed handbook by Torgny Jansson shows how to best work with the Tormek TNT sharpening system.
SKU: TNT-708
Price: $334.00 

Quantity:   


E-mail this product to a friend E-mail this product to a friend





Advanced Water Trough
Enlarged Lip
The Advanced Water Trough AWT-250 has an enlarged standard lip which ensures that your workbench stays free from water.

Magnet Cleans the Stone of Steel Particles
The water trough incorporates a strong magnet, which attracts the steel particles ground from the tools being sharpened. This keeps your stone clean and cutting more freely. These small steel particles are otherwise pressed into the stone surface and can disturb the sharpening. When cleaning the water trough, you’ll find that most of the steel will be located right on the magnet. It can be wiped off the water trough with a paper towel or rag.

Water Chute for Long Tools
For long tools that drip water over the edge of the lip (like chef’s knives and planer blades), just add the water chute. It attaches easily and directs the water back into the trough.

Tilt Shoes Control the Water Flow
Two Tilt Shoes are supplied with the AWT-250. You can use them to raise the honing wheel side of the machine so the water follows the tool towards the outside of the stone and runs back into the water trough. You minimize the water dripping onto the housing. This is an advantage especially when sharpening wide tools. When not required they can be stored magnetically under the machine.

Fits Tormek T-7, Tormek 2000 and all older models with 250 mm (10") stone.