The Hand Tool Kit contains these Tormek Jigs: (Click on individual items to see descriptions and images)
SVM-45 Knife Jig - For most knives. Width 45 mm (1 3/4"). Long knives need to be stiff. Min blade length 60 mm (2 3/8"). Also for carvers draw knives.
SVM-140 Long Knife Jig - Suitable for long and flexible knives. The 140 mm (5 1/2") width of the jig stabilizes a thin blade. Min blade length 160 mm (6 3/8").
SVX-150 Scissors Jig - For scissors of all sizes and shears. Also suitable for portable electric hand planer blades.
SVS-32 Short Tool Jig - For straight shanked carving gouges and V-tools down to 45 mm (1 3/4") length. Short wood chisels and tools for power carvers. Max. tool width 32 mm (1 1/4").
SVA-170 Axe Jig - For carving and carpenter's axes. Max. axe size 170 mm (6 1/2").
With exchangeable leather discs. This Wheel is used for inside honing and polishing of gouges and V tools. Mounts outside the standard leather honing wheel.
This wheel has exchangeable leather discs so you can easily replace a disc with a worn tip. You can order replacement discs in the drop down box below. Discs with alternative, narrower profiles are available as optional extra.
The jig comprises a tool holder (1) which runs in a sleeve (2). The tool is aligned with a disc (4) and tightened with a knob screw (5). There is a washer (6) for wide gouges. The stop ring (7) can be set for a convex bevel with a screw (8).
The tool holder can be set in any position from 0 to 5 with the 5 mm allen key (9). The setting can be noted on a special recipe label (10), which is attached to the ferrule. A special pen, which works on these labels is included (11). For turning cutters there is a shaft (12) with a mounting screw (13) and a 2,5 mm allen key (14).
The versatile TORMEK Universal Support is the basis of the TORMEK system. It is made of 12 mm (approx. 1/2") round steel and has a double mounting for maximum stability. The Universal Support incorporates a micro adjust for exact and fast fine setting.
The Universal Support can be placed in three positions:
The Universal Support can be placed either in the vertical sleeves or in a horizontal base. These two positions enable you to grind either towards the edge or away from the edge.
The Universal Support can also be placed horizontally for honing with jigs. Honing must always be done with the wheel running away from the edge.
Vertically in the two sleeves. For grinding towards the edge.
Diamond Truing Tool with screw feed trues the stone exactly round and flat.
Dual knob screw permits an easily controlled feed across the stone for a perfectly flat surface. If you feed faster, you create a rougher surface which grinds more quickly.
Mounts and locks instantly in the right position on the Universal support of the TORMEK sharpening system.
The cutting depth is controlled by the Micro Adjust on the Universal Support.
YourCompany.com
The versatile TORMEK Universal Support is the basis of the TORMEK system. It is made of 12 mm (approx. 1/2") round steel and has a double mounting for maximum stability. The Universal Support incorporates a micro adjust for exact and fast fine setting. 
