|
|
|
| Japanese Waterstone |
Tormek Japanese Waterstone
The Tormek Japanese Waterstone is 4000 grit and delivers a mirror finish with hardly any visible marks. Since it is made to create the finest surface, it has a limited steel removal capacity and cannot be used for shaping* a tool.
It excels at sharpening hand tools like carving tools, knives, scissors, plane irons and wood chisels where a minimum of steel removal is needed and a superior surface finish is demanded. Its unique composition gives the stone an extremely long life. Since the surface left by the Japanese Waterstone is so fine, we do not recommend honing afterwards on the leather honing wheel.
You should clean the stone surface of steel particles every minute or so with the fine side of the Stone Grader SP-650. Do not use the coarse side of the Stone Grader on the Japanese Waterstone.
Change stones quickly and without tools with TORMEK's new EzyLock Replacement Shaft! |
|
|
|
|
| EzyLock Replacement Shaft |
With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left hand thread causes the rotation of the wheel to tighten the nut to the right torque.
Turn the Ezylock anticlockwise by hand and the grindstone will automatically tighten during the first sharpening. You need no tools.
When dismounting, you turn the stone clockwise and the EzyLock will automatically become loose.
This construction also makes it very easy to change grindstones, from the standard aluminum oxide to the new specialty stones (Blackstone Silicon for High Speed Steel and the 4000 Grit Japanese Waterstone).
The shaft, washer and EzyLock are all made of stainless steel.
Fits Tormek T-7, Tormek 2000 and all older models with 250 mm (10") stone.
Requires replacement of main shaft. |
    |
|
|
|
|
|
|
|
|
|
|
YourCompany.com
E-mail this product to a friend
The SWISSREX SuperVise is available in the USA and Canada exclusively from Advanced Machinery. It's functions are similar to those of the original
It is covered by a Lifetime Warranty: just return any broken metal part from your SWISSREX SuperVise for a free replacement anytime – you pay only a nominal handling charge for as long as you own the tool! 