TNT-300 Woodturner's Instruction Box - 1 hour and 20 minutes comprehensive DVD made by Jeff Farris and a detailed handbook by Torgny Jansson shows how to best work with the Tormek TNT sharpening system.
NEW from Tormek: BGM-100 Bench Grinder Mount with New Mounting Hardware
No matter which grinding machine you use the most difficult part in sharpening woodturning tools is to exactly replicate the shape and the edge angle. Now we offer the Bench Grinder Mounting Set BGM-100 which makes the patented Tormek woodturning system also available for bench grinders.
Why would Tormek, the pioneer in water cooled sharpening, now introduce their jigs also for bench grinders?
We believe that the water cooled Tormek machine is superior in sharpening virtually every edge tool in your shop. However, there is no secret that when it comes to woodturning tools the initial shaping can be done faster on a bench grinder. We know that some woodturners dedicated to Tormek also have access to a bench grinder and use it for the first rough shaping. It is difficult to control by hand and it is easy to remove more steel than necessary. Now you can use the same precise Tormek jigs through the whole sharpening process. There is no longer trial and error in getting the right shape on the bench grinder. You can benefit from the fast steel removal on the bench grinder and also get the finest surface on the Tormek water cooled grindstone and the leather honing wheel – all in one jig system.
If you do not yet have a Tormek machine you can still benefit from the precise Tormek jig system on your bench grinder and easily get the desired shape and edge angle. Since the Tormek system controls these factors, the tools will behave in exactly the same predictable way all the time at the lathe. The principle for setting the shape and edge angle is the same regardless of which machine you use. If you later choose to add a Tormek to your shop, you will already have the jigs you need for your turning tools.
The Key to Replication
The Turning Tool Setter TTS-100 takes the guesswork out of sharpening and is the key to the Tormek sharpening system for woodturning tools. There is no longer any need for trial and error to get the best edge shape for each turning operation. You just set the jig and get the shape you have selected. Thanks to the patented design it works on any stone diameter. So you can go from a 6” wheel to a 10” grindstone and achieve the same shape. It works on all Tormek models and together with the BGM-100 Mounting Set it can also be used on a standard bench grinder.
How does it work?
Three factors determine the shape of a gouge or a skew. By repeating them at each shaping or sharpening you will get an exact replication of the shape and edge angle every time.
Distance to Stone
Shaping and Sharpening
The Tormek method makes a distinction between the shaping and sharpening (or re-sharpening) of a tool. When shaping you remove steel to achieve the shape and edge angle you want. When sharpening you just touch up an existing shape to renew the sharpness. Once you have created the desired shape on the tool, it is an easy task to re-sharpen the tool exactly to the same shape every time.
If you have a Tormek machine, you can create the initial shape on your bench grinder and finish the sharpening on your Tormek water cooled grindstone. You get the best of two worlds; the fast steel removal from your high speed bench grinder and the fine surface from your fine water cooled grindstone and the leather honing wheel. A finer edge gives the wood a smoother finish with less need for sanding. A finer edge also stays sharp longer than a rough edge.
Which Shape Should I Use?
The Turning Tool Setter is delivered with a Selection Chart where you can see which shape is suitable for your current type of turning. These geometries are recommended by experienced woodturners and recognized woodturning training workshops around the world, e.g. Craft Supplies in the USA and Drechselstube Neckarsteinach in Germany. Of course you can also sharpen with geometries other than the shapes provided by the TTS-100 Setter.
Bench Grinder Mounting Set BGM-100
The package includes a Universal Support, a Horizontal Base, a height adjustable block, hardware, feet for the base you will build and comprehensive instructions.
Mount the set on either side of the grinder, or buy two sets and mount on both sides and you get a versatile sharpening system.
Not all grinding wheels are suitable for the precision sharpening of edge tools. The standard wheels mounted on the grinder are often too hard and become glazed easily, which reduces steel removal and causes overheating of the tool. Use an aluminium oxide wheel with the right binding – not too hard to avoid glazing and not too soft to avoid grooves.
The wheel surface must be kept fresh and clean. Worn grains must wear away so that new ones come into play. If not, the surface becomes glazed and the grains will rub instead of cutting, which will increase the friction and heat development. Use a diamond wheel dresser to maintain the surface in a good shape and condition.
Influence of heat on HSS steel
HSS steel can stand a much higher temperature than carbon steel without decreasing the hardness. However, at the very tip of the edge, which is very thin, the temperature can easily rise to a level which will affect the hardness. Therefore grind cautiously at the tip of the edge and do not allow it to become blue. Overheating HSS steel can cause a decrease in the hardness by as much as 4 HRC, which shortens the life of the edge. If you cool it in water, do not cool abruptly from a high temperature, since this can cause micro cracks invisible to the naked eye.
The fine dust from the grinding wheel and steel particles from the tool can be a health hazard. It is best to use a dust extraction system, so the dust does not pollute the air. You must use a separate extraction system and not the same system as for your wood dust, since a spark could light a fire in the inflammable fine dust.
Tormek Blackstone Silicon for T-7 and S2000 Models has been developed for shaping and sharpening HSS and exotic alloyed steels. It can also touch up tungsten carbide. It does not offer faster steel removal on ordinary carbon steel. The combination of abrasive hardness, shape and grain size is optimized to work efficiently at the Tormek system’s low RPM. Its faster material removal is an advantage especially when shaping tools with a large bevel surface, where the grinding pressure is limited, for example, planer blades and woodturning skews.
The grit size 220 is the same as the Tormek Original Grindstone and can be altered to work like a 1000 grit stone with the Stone Grader SP-650. Thanks to its sharp and relatively small grains, the Blackstone removes hard steel efficiently even at low grinding pressure. The Blackstone Silicon also offers exceptional wear resistance. It can even touch up tungsten carbide, where the tool already has an established shape.
Please note: For normal carbon steel chisels, knives, scissors, plane irons, etc. we recommend the SG-250 Original Grindstone.