Diamond Scroll Saw Blades Size DB16
Previous  Up  Next" 
Diamond encrusted wire for cutting stone or glass.

Item Application Diameter
DB16 Cutting of stone, tile or glass to 1/4" .032

Price: $49.95 


E-mail this product to a friend E-mail this product to a friend

Jeweler's Metal Cutting Scroll Saw Blades
Scroll Saw blades precisely manufactured in Germany with special alloys. These blades are strictly for cutting hard and some (non-clogging) soft metals.

Item Application TPI Width Thickness
GS2/0 Materials up to 1/16" 56 .020 .010
GS01 Materials up to 1/16" 50 .024 .012
GS03 Materials up to 1/8" 42 .030 .014
GS05 Materials up to 1/8" 36 .033 .016
GS07 Materials up to 1/4" 32 .043 .019
GS09 Materials up to 1/4" 25 .047 .022
GS12 Materials up to 5/16" 19 .065 .024

Spiral Scroll Saw Blades
These blades saw in all directions and have 360° cutting capability - you never have to turn the workpiece. Use for cutting all types of materials including wood, plastic, non-ferrous metals, plaster, bone, horn, etc. For use in power scroll saws and hand-held fret and jewelers saw frames. Cutting speed and finish depend on material thickness and number of teeth per inch. These premium blades are made of high carbon steel, hardened and tempered to stay sharper longer.

IMPORTANT:  These blades are supplied spiraled end-to-end, NOT flat on the ends. They will flatten out in your blade holding device, however, and there is no performance impact from any additional twist they may receive from installation. If your blade mounting system does not readily accept the spiral end, you may also use pliers to flatten the ends prior to installation.

Item Application TPI Thickness
SB01 For cutting all types of materials up to 3/8" 51 .030
SB02 For cutting all types of materials up to 3/8" 46 .032
SB03 For cutting all types of materials up to 5/8" 41 .035
SB04 For cutting all types of materials up to 5/8" 36 .041
SB05 For cutting all types of materials up to 1" 36 .047
SB06 For cutting all types of materials up to 1" 30 .051

Click here to see our blade assortments.

Blade Clamps
Extra blade clamps make your life easier by allowing you to prepare multiple blades for rapid, tool-free blade exchanges as you work, whether switching between blade sizes or simply replacing a dull one. For maximum convenience, get one set of clamps for each blade size and type you commonly use!  

HEGNER standard blade clamps all share the same external size and shape, but are available with varying slot widths to better adapt to specific blade sizes, and are sold BY THE PAIR.

Please note:  new HEGNER saws are supplied with one or two pair (depending on saw model) of medium (0.7mm) clamps.

Choose 0.5mm (small - .020") for sawblade sizes 4 or smaller.
Choose 0.7mm (medium - .028") for sawblade sizes 5 thru 9.
Choose 1.0mm (large - .040") for sawblade sizes 10 or larger.

Why different slot sizes?  HEGNER's unique, patented clamps grip the blade easily and effectively due to a leveraged crimping action produced by the inside edges of the clamp slot converging onto the blade at an angle.  This angle must be within a certain range for maximum effectiveness.

If the angle is too shallow (large blade in small clamp) the grip will not be as secure.  If the angle is too steep (small blade in large clamp) the gripping area will be too small, causing stress on the blade which can lead to premature blade breakage. The smaller the blade, the greater the benefit of the narrow slot clamps.

How do you easily identify which clamp is which?  Small and large slot clamps both have a smooth top, but are easy to differentiate since the large slot is twice the size of the small one.  The medium slot clamp has a dimple in its top so you can easily tell it apart from the others.  Also, all separately ordered clamp pairs are supplied in individual bags identifying their size.

Note:  If you own an older saw with older clamps, the dimple may not be present on medium clamps, as this feature was introduced less than 20 years ago.  If in doubt regarding size, loosen the clamp screw and use a feeler gauge to determine the slot width.  Then mark the clamp in some way that suits your needs, so that you can use it for the proper blade sizes.

Standard clamps are supplied with a HEGNER TuffScrew, as shown above.

Double Reverse Tooth Scroll Saw Blades
Exclusive ScrollAmerica Design with the benefits of both double tooth and reverse tooth features. Lower double teeth are reversed to reduce tearout.

Item Application TPI Width Thickness
RPO3 Materials up to 1/4" 23 .032 .013
RPO5 Materials up to 1/2" 16 .038 .016
RPO7 Materials up to 3/4" 13 .044 .018
RP09 Materials up to 1" 11 .053 .018
SM500 JAPANESE BLADE: Materials up to 1 1/8" 12 .065 .020

Click here to see our blade assortments.